Agilent 7696A HPLC LC/MS GC Sample Prep Workbench G4529A G4513A

This Varian CP-3800/3380 Gas Chromatograph GC System & Model 8400 Autosampler was removed from a (more) university lab where it was surplus to requirements. The information plate suggests this system was built in 2004. The GC powered on and completed self-calibration with no issues. The oven was tested at 200C and measured at that with our digital thermometer (thermometer not included in the sale). The autosampler also powered on with the main unit and went through self-calibration. It was not tested further. It is in good condition with only minor marks from use.

Agilent 6890 Series Plus GC (G1530A) Gas Chromatograph This item was removed from a university labor (more)atory where it was surplus to requirements. The item is in reasonably good cosmetic condition, with visible chemical reactions to the plastic on the top covers.It powered on and successfully conducted self-tests for ROM, RAM, signal path, and detectors. However, two error messages were displayed during operation:- Pneu Error 0158 - PCB Cmd Error 2003 "The pneumatics board, under the EPC modules, requires replacement." Due to the presence of both error codes, this item is listed as Spares/Repair. Specifications:- Model: 6890 Series Plus GC (G1530A) - Serial No.: US00036800 Please note - The screen displays a clear and steady image, though photos may appear distorted due to refresh rate.

This Hewlett Packard HP 6890 Series GC System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and the GC oven is functional. (Digital thermometer not included). We are unable to test further at our facility. It is in good cosmetic condition. Includes the following: Metrohm Connector Olive M8 Outer 2 x 11mm septa solsept prepierced Packed Column CHR-WHP 100/120 5ft 3.1mmlD 3/16inOD Supelcowax 10 Fused Silica Capillary Column 30m x 0.25μm film thicknessS/N - 48176-02B SPB-624 Fused Silica Capillary Column 30m X 0.25mm x 0.25μm film thicknessS/N - 63699-01A

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 60 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Stirring width: 30 mm - Usable volume 68 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Shaking width 30 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 450 mm - Capacity approx. 60 L / 1 stirring tray

This Rheodyne MXT715-000 Switching Valve was removed from a university lab where it was surplus to r (more)equirements. The unit powers up with the included PSU. It has not been tested further. It is in good cosmetic condition with minor marks from use.

This FluidX Xtp-1152 was removed from a university lab where it was surplus to requirements. This it (more)em powers up and is in good cosmetic condition. It has not been tested further.

Pacific Biosciences Sequel DNA Sequencing System This was removed from a university lab where it was (more) surplus to requirements. The unit powers up. The PSU is included. The system boots up but shows errors in relation to a smrt link server. There was no smrt link server on the client's network which is what caused this issue. It is in very good cosmetic condition but has a dent on one of the panels. Comes with:-(Boxed) Solid State Cooling SystemsModel - UC180PN - 10-180-G1-P20-RSN - 8008262No power supply to test. 1 x 30amp twist lock to 32amp 240volt cable Consumables:-1 x Sealed Pack of TX1009 AlphaWipe Polyester Wipers 9" x 9" (75 Wipes)1 x Sealed Pack of TX404 Absorbond Polyester Wipers 4" x 4" (300 Wipes)2 x Bottles of Sequel Coolant - Dynalene PG 30% - Both expired 2018/1921 x Pacific Biosciences 96 well Verification Plates6 x Bio-Rad Hard Shell 96-Well Sample Plates1 x Pacbio Sequel Pipet Tips v2 (sealed)1 x Pacbio Sequel Pipet Tips (31 tips left)2 x Boxes Sequel SMRT Cell Oil (5 left in one/6 left in other)1 x Tecan Conductive 200ul 96pcs rack (no tips)4 x Packs SMRT Cell Mechanical (1 sealed/3 opened)4 x Packs Pacbio Tube Septa (10 per pack)1 x Pack of 11 Pacbio 0.5ml Empty NFC Verification Tubes1 x Thermal Block1 x Pack TX759B CleanTips Swabs (100 Swabs, Sealed)1 x Uline Kapton Tape1 x Red Ethernet Cable2 x Pacbio Sequel Sample Plate Adhesive Foil

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Key Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 9 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.