Scilogex SCI100-S Rotary Evaporator w/ Coiled Condenser, 110V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V Sp (more)eed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BO302-A Oil Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BO302-A Oil Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RV 3 V-C Rotary Evaporator Features - Locking mechanism: red indicator shows unlocked position o (more)f vapor tube - Adjustable immersion angle - Stepless speed setting with dial control and analog speed display - Speed range of 20 to 300 RPM - Low device voltage (24V) ensures user safety - Compatible with the entire range of IKA RV 10 glassware 4L heating bath for temperatures up to 99°C with a digital temperature display and carrying handles Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Mechanical lift for precise positioning of the glassware, suitable for left or right handed operators and equipped with an end-point safety stop The new RV 3 Rotary Evaporator is the ideal entry-level model of the IKA rotary evaporator portfolio. It finds a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing and quality assurance, in laboratories, and in plant construction. Thanks to specially designed glass guides, the transparent vertical coated condenser makes extremely efficient use of the 1500 cm² cooling surface. INCLUDED The IKA RV 3 V-C Rotary Evaporator includes: - RV 3 ECO - RV 3 eco drive - HB eco S099 Heating Bath - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 10.910 coated glassware set - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 3 V-C Rotary Evaporator SpecificationsType of cooling verticalCooling surface 1500 cm2 Motor principleDCSpeed range20 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke150 mmHeating temperature rangeroom temp. - 99 °CDimensions (W x H x D)440 x 530 x 330 mmWeight22.31 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V-CRV 10 Auto V-CRV 10 Digital V-CRV 3 V-CRV 8 V-CType of CoolingVertical CondenserVertical Condenser CoatedVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CVacuum Controller IntegratedYesYesN/AN/AN/ATimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.65 kg31.56 kg32.67 kg22.31 kg26.07 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

IKA RV 10 Digital V Rotary Evaporator Features - 4L Heating Bath with optimized heating bath volume  (more)allowing for fast-heat up - Left or right flask rotation with a speed range of 20 to 270 RPM - Features smooth start function along with a timer function - RS-232 digital interface for remote control and IR interface - Easy and safe operation due to ergonomical design of the user interface Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy exchange of flasks Safety temperature circuits are featured, along with Dry-run protection for an adjustable lower end stop and lock function for the heating bath The RV 10 digital represents the continual enhancement ofthe IKA RV 10 Rotary Evaporator line. The unit comes with a new universalheating bath, vertical glassware, state-of-the-art safety features and digitalconnectivity. The RV 10 digital is a robust and reliable lab companion. Itsoptimized bath volume allows for fast heat-up times. The condenser unit hasspecial designed glass tubes that utilize the 1500 cm² surface extremelyefficient. That’s why the RV 10 digital delivers reliable and reproducible processresults that are usually reserved for more costly systems. Additional featuressuch as smooth start, left-right interval or timer function capability supportthe user in their daily lab work. Another important aspect of the RV 10 digitalare the sophisticated safety features. The motorized lift has an automatedlift-out function in case of power outage to prevent superheating of thesolvent. Safety temperature circuits can be set individually. Dry-runprotection, adjustable lower end stop and lock function of bath settingcomplete the line of safety features. Furthermore, IKA offers a choice ofcoated glassware for increased safety needs. The RS 232 interface allows forremote control via IKAs “labworldsoft”. The Heating bath is controlled via theIR interface from the main unit. INCLUDED The IKA RV 10 Digital V Rotary Evaporator includes: - RV 10 digital - HB digital S099 - RV 10.900 Glassware vertical - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Digital V Rotary Evaporator Specifications Type of coolingverticalCooling surface1500 cm2Motor principleDCSpeed range5 - 280 rpmReversible direction of rotationyesLiftMotorStroke 140 mm Heating temperature rangeroom temp. - 180 °C Heat output1350 WSet temperature resolution1 ±KFilling volume max.4 lTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight32.36 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationRV 10 Auto Pro V FlexRV 10 Auto VRV 10 Digital VRV 3 VRV 8 VType of CoolingVertical CondenserVertical CondenserVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.34 kg34.96 kg32.36 kg28.3 kg25.76 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }Request a Formal Quote

IKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice Condenser Features - 4L Heating Bath with opti (more)mized heating bath volume allowing for fast-heat up - Left or right flask rotation with a speed range of 20 to 270 RPM - Features smooth start function along with a timer function - RS-232 digital interface for remote control and IR interface - Easy and safe operation due to ergonomical design of the user interface Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Safety temperature circuits are featured, along with Dry-run protection for an adjustable lower end stop and lock function for the heating bath The RV 10 digital represents the continual enhancement of the IKA RV 10 Rotary Evaporator line. The unit comes with a new universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1500 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs “labworldsoft”. The Heating bath is controlled via the IR interface from the main unit. INCLUDED The IKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice Condenser includes: - RV 10 digital - HB digital S099 Heating Bath - RV 10.4 Dry Ice Condenser Coated Glassware - RV 3.4 Woulff bottle - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice Condenser Specifications Type of coolingverticalCooling surface1500 cm2Motor principleDCSpeed range5 - 280 rpmReversible direction of rotationyesLift MotorStroke 140 mmHeating temperature rangeroom temp. - 180 °CHeat output 1300 WSet temperature resolution1 ±KFilling volume max.3 lTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight20 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationIKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 3 Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 8 Rotary Evaporator w/ Coated Dry Ice CondenserCooling Surface1500 cm²1500 cm²620 cm²Speed Range5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorManualManualStroke140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CHeat Output1300 WN/A1400 WFilling Volume Max.3 L4 L4 LTimerYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

The Ultravap Mistral from Porvair Sciences is designed to remove the traditional laboratory ‘bottlen (more)eck’ of solvent evaporation from microplates. Fully automating the dry-down step has always been impossible because it is difficult to interface liquid handling robots with traditional centrifugal-type evaporators. The Ultravap Mistral design, by dispensing with the rotating arm of the centrifuge and offering a fully-flat front profile, overcomes this problem and is much better positioned to link with your robot. With more than 20 years experience in producing deep well microplates, Porvair Sciences has thoroughly researched the problems of drying down organic solvents in plates. The Ultravap Mistral may be operated with a supply of clean, dry compressed air in place of nitrogen, if the chemistry allows. It has been designed in close co-operation with the leading suppliers of laboratory liquid handling robots and is suitable for integration directly with the following manufacturers robots:  Hamilton Robotics, Tecan, Perkin Elmer, Beckman Coulter A built in digital gas flow meter controls the flow rate and switches off the heaters if the gas supply drops below 30L per minute for maximum safety. Between 30 and 5L per minute, the Levante may be operated without heating using gas at input temperature only. Similarly, if the pressure exceeds 7 bar, safety valves will shut down the system to prevent damage. Optimal gas supply is 70L per minute at 6 bar. Equipped with a 48 straight needle head

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

SCILOGEX DILVAC Dry-Ice Maker, c/w Pressure Hose and Pressure Gauge, USA versionProduct Description  (more)The SCILOGEX Portable Dry-Ice Maker is the fastest way of providing a block of Dry-Ice for your needs. It is compact and lightweight, requires no electrical power and is safe and simple to use. Most importantly it is there to give you immediate access to Dry-Ice (-109.3°F) when you need it. The economy of having Dry-Ice 'on-tap' can provide considerable financial savings. The SCILOGEX Portable Dry-Ice Maker produces a block (not slush!) of approximately 2.2Lbs (1KG) in weight in about 1 minute. Yield from a 75 lbs liquid cylinder - 5 to 6 blocks at room temperature. (Yield can appreciably increase at lower ambient temperatures, i.e. @ 41°F approximately 1/3 more blocks may be produced.) The dry-ice maker comes complete with a steel hose ready to connect to a cylinder of compressed liquid CO2 with an internal siphon and standard CGA-320 valve (Note for international orders, we can supply BS341 No. 8 valve) Full instructions provided. (Note: We do not sell/rent gas cylinders/tanks, which can be obtained from local gas dealers or welding supply stores.)Dimensions of Dry-Ice Maker - 8.9" Long x 6.3" Wide x 6.3" High Dimensions of block produced - 7.0" Long x 3.2" Wide x 4.3" High Click Here to View Product Video INCLUDED: The SCILOGEX DILVAC Dry-Ice Maker, c/w Pressure Hose and Pressure Gauge, USA version includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with CoverThe Scilogex Aluminum Alloy Rotor with cover ha (more)s the capacity to accomodate 24 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D3024 & D3024R centrifuges. INCLUDED: The Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 TT.18RCP2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to su (more)it most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduces flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 TT.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark IPS7101-50 HCS-50 High Capacity Magnetic Stirrer, 50L The Benchmark Industrial HCS Series  (more)of high-capacity stirrers provide reliable performance and safe operation for high throughput lab use. These stirrers feature a durable, chemically resistant white ceramic top plate, which protects the internals of the stirrer from leaks and spills. The powerful motor drive system ensures efficient and thorough mixing in large vessels and viscous samples. Ideal for large-scale stirring applications, the HCS Series offers 50-liter and 150-liter maximum capacity models, as HCS-50L and HCS-150L respectively. Mixing speed can be viewed on the large digital display, and speed is adjustable from 50 rpm to 1500 rpm (HCS-50L) or 1200 rpm (HCS-150L). The built-in timer settings range from 1 second to 9 hours and include a continuous operation setting. INCLUDED: The Benchmark IPS7101-50 HCS-50 High Capacity Magnetic Stirrer, 50L includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty