Système automatisé de préparation d'échantillons de COV Teledyne Tekmar Atomx | 15-0000-1EC pour les pièces

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. Forced ventilation for a better temperature distribution and faster reaching of the set point. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven with forced ventilation STE-F 52 FALC

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

COMBISTORAGE UNDERBENCH Optimize the space in your laboratory thanks to the COMBISTORAGE under hoods (more). Replace your furniture in the laboratory with useful safety cabinets for acids, bases and flammables. Features of models for flammable products: - Construction in electro-galvanized steel sheet with thicknesses from 1 to 1.5 mm cold bent - gray - External finish in acid-resistant epoxy resin and passage in a thermal tunnel at 200°C - Insulation with high density rock wool panels and calcium sulphate panels - Automatic closing of the doors when the ambient temperature reaches 50°C - 30mm thermo-expanding insulating gaskets - Air inlet and outlet with certified fire grids that close the ducts when the temperature reaches 70°C - Anti-spark brass hinge - Panels made of HPL (High Pressure Laminate) with high resistance to chemical and aggressive vapors - Structure that provides for replacements with spare parts. - Predisposition for ventilation with 100Ø mm flange for external connection or filtration ventilation system - Equipped with grounding - Adjustable feet - Key lock - Shelves made of plasticized steel or stainless steel with adjustable height - Model with chest of drawers made of plasticized steel - Shelves fixing with non-sparking aluminum pegs - Signage with pictograms according to ISO 3864 - 90 minutes fire resistance certificate EN14470-1 BV certified - EN16121 BV certification HOW TO CHOOSE YOUR SECURITY CABINET IN 3 SIMPLE STEPS? 1 - Measure the space you have available in your laboratory: under the hood, instead of a simple piece of furniture, in a space you do not use. 2 - Think about if you will need a particular support base 3 - Choose the cabinet model for acid chemicals, bases or for flammable products THE VERSATILITY OF COMBISTORAGE MODELS COMBISTORAGE UNDERBENCH safety cabinets can be combined on bases of different lengths. (It allows to have a single base for composition: ACIDS + BASES + FLAMMABLES). As an option, electric fans are available for ventilation, - Left, right or drawer door. - 13 widths available - 70 mm support bases - All models available in 620 or 720mm heights DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. CONTACTS US ➞

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree; the transparent internal door. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

Termoreactor for analysis of COD Bioblock Scientific 1074. Capacity for 8 tubes of 16 mm diameter an (more)d 1 tube of 22 mm diameter. Operation to 100 or 145 ºC. Continuous operation or timer up to 120 min. Specifications: 230 V; 50 Hz; 270 W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Mixed Job Lot of Laboratory Equipment - Nikon, Eppendorf, Rainin, iCyt, Bio-Tek This job lot of ite (more)ms come from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-44613 iCyt Fluidics CartITEM-37198 5 x Elo Monitors. 5 x Monitor Arms + Stands.ITEM-37199 Rainin E3 Rapid Charge StandITEM-37200 Hanwell icespy ThermometerITEM-37201 Lafayette Instrument Grooved PegboardITEM-37204 box of electrophoresis gel tanksITEM-37208 Daventest OvenITEM-44626 LC 1610 Auto Sampler ICI InstrumentsITEM-44632 GBC-ComboITEM-44638 Leica EG F unitITEM-44637 Desaga CamLabITEM-44636 Techne Hybridiser HB-1DITEM-44633 Biometra Trio-ThermoblockITEM-44631 Eppendorf Centrifuge 5415CITEM-44634 Clifton Unstirred BathITEM-44635 3DHistech TMA MasterITEM-44642 Bio-Tek uQuant Microplate Spectrophotometer μQuant LabITEM-44646 Nikon M-35S CameraITEM-44647 Nikon M-35S CameraITEM-44648 LKB Knifemaker Type 7801 AITEM-44650 6x Microtome Steel BladesITEM-44651 Nikon EFMITEM-44654 2x Nikon Power PacksITEM-41257 Nikon Diaphot Phase Inverted Contrast Microscope w/ 3 x Objectives LabITEM-44678 10 x X-Ray CassettesITEM-44679 FSA WhirlimixerITEM-44680 Eppendorf Centrifuge 5415 D

Canon XF305 HD Video Camera with Charger w/ Power Adapter This Video Camera was removed from a unive (more)rsity lab where it was surplus to requirements. The item is in reasonably good cosmetic condition and is in full working order. Accessories included: Carry Bag Power leadLens capTransfer lead

Intravital Microscope System - Zeiss Examiner Z1 with Accessories &amp; Software This is being sold  (more)on behalf of a client. It is surplus to requirements. The system is in full working order, and in excellent cosmetic condition with minor marks. There are a vast amount of accessories, extras and add ons included with this system. 1. VivoTM 100 Intravital Microscopy Workstation Includes motorized research fixed stage upright microscope stand with harmonic focusing drive, 2-positionnosepiece, motorized 5-position filter cube turret, manual narrow profile long WD condenser, slider for Dodtcontrast, LED transmitted light lamphouse, two camera ports with c-mounts, crosshair reticle and dust cover. Alsoincludes direct-coupled white light LED epi illuminator, high speed 2048x2048 sCMOS Flash4.0 v2+ camera, motorizedx,y translating platform stage, 36"x36" vibration isolation table and equipment rack workstation. Windows 7 64-bit workstation with dual Six-Core Xeon 1.6GHz processors (10M L3 Cache), 16GB 2133MHz DDR4 RAM, 2GB Nvidia Quadro K620 workstation graphics card, 256GB Solid State Drive (SSD) (approx. 300MB/s sequential transfer rate),8XDVD+/-RW, 1300W power supply, backlit wired keyboard and 27" flat panel monitor. SlideBookTM software for 3D multipoint image capture and analysis and one additional offline license. System includes one day of on-site installation and training, a one year warranty on all hardware components and one year of free updates for all software components. 2. W Plan-Apochromat 40x/1.0NA Water Dipping Objective for VIVOTM Working distance 2.5mm. 3. Upgrade from LED White Light Source Direct Coupled to LED 4-Color Light Engine for Fixed Cell Imaging for Zeiss Microscopesincludes light engines for DAPI (390/18), GFP (475/28), RFP (542/27) and Cy5 (632/22) 4. Microscope Filter Cube for DA/FI/TR/Cy5 Pinkel Set (No Exciters) for LED illumination, includes quad-band dichroic and quad-band emitter Photomanipulation Equipment - 5. Ablate!TM Photoablation System for Fixed Position Illumination 532nm pulsed laser, pulse energy 60 ?J @ 200 Hz. Includes automated intensity control and Photomanipulation module for SlideBookTM. 6. Ablate!TM Epi Mount Adapter for VIVOTM Allows attachment of Ablate!TM illuminator to the epi-fluorescence port of VIVOTM workstations. Also allows attachment of a widefield epi-fluorescence light source via light guide for simultaneous illumination.7. Ablate!TM 532 Notch Dichroic for Epi Mount Light Sources transmits 532 laser, reflects visible wavelengths &gt;90% 8. Support Kit for Ablate! 9. Microscope Filter Cube for Ablate!TM 532 Notch Dichroic and Blocker for Intensifier includes notch dichroic for 532 illumination and blocking emitter for protection of intensifier from reflection of 532 pulses The system is available for collection from Cambridge, UK, but we may be able to offer delivery of the system at an extra cost. Please enquire for a quote. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Hermle 24 x 1.5/2.0ml Rotor for Z216 Series The Hermle 24 x 1.5/2.0ml Rotor is for use with Z216 M a (more)nd Z216 MK centrifuges and offers speeds up to 15,000 RPM with maximum RCF of 21,379 x g. INCLUDED: The Hermle 24 x 1.5/20ml Rotor for Z216 Series includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036300460 Overhead Stirrer Impeller, BR 18 Half-Moon Our half-moon impeller is specially de (more)signed for use in round-bottom flasks with NS 29/32 or larger. Combined with the vacuum-tight PTFE stirrer guide, you get a completely tight reaction system. The half-moon impeller HR 18 works best up to 1,700 ml. The half-moon impeller consists of a PTFE blade and a PTFE-coated stainless-steel shaft. The stainless-steel core ensures the stability of the stirrer shaft and secure attachment in the overhead stirrer without the risk of breakage of conventional glass stirrer shafts. The diameter in the clamping area is 6.5 mm; the stirrer shaft with the thick-walled PTFE coating has a diameter of 8 mm. Due to its anti-adhesive property (non-stick coating), the half-moon impeller is easy to clean and can be used up to a maximum application temperature of 250°C. INCLUDED: The Heidolph 036300460 Overhead Stirrer Impeller, BR 18 Half-Moon includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty