Incubator FOC 120I Connect Velp

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Infors Multitron HT Triple Stack Incubator This incubator system was removed from a university labor (more)atory where it was surplus to requirements. The units are in good used cosmetic condition with signs of general use. It has several operational issues affecting its performance: Top Unit: - Cooling system and blower heater are faulty. - Temperature settings are inaccurate: - Set to 1.0ºC, read 9.8ºC. - Set to 37ºC, initially correct but now fails to heat. - Set to 65ºC (Max), unable to maintain temperature; reads as faulty. - Shaker speed sensor is faulty, limiting operation to a maximum of 400rpm. Middle Unit: - The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX). - Shaker speed sensor issues cause erratic operation without displaying current speed. Bottom Unit: - The unit powers up and was successfully temperature tested, displaying accurate readings when set to 37ºc & 65ºc (MAX). - Shaker functions up to 230rpm smoothly; above this, it becomes erratic and displays errors. Given the multitude of issues, particularly with the cooling systems, heaters, and shaker speed sensors across all units, this triple stack incubator is listed for spares or repairs. This setup may require significant repairs, or could be used for parts by those capable of addressing these extensive technical issues.

Heraeus HeraCell CO₂ Incubator This item was removed from a laboratory where it was surplus to requi (more)rements. The incubator is in good clean used condition, with two shelves fitted and all components in working order. It is in good working order. (thermometer and CO₂ analyser not included). Specifications: - Model: HeraCell - Serial No.: 51013568 - CO₂ Range: 0% to 20% - Features: Two shelves, operating instructions, good condition door latch and seal

Memmert IN55plus Natural Convection Incubator 53L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 53 L (1.9 cu.ft.) Features - Internal volume of 53 L (1.9 cu.ft.) for versatile storage needs - Adjustable temperature range from +20°C to +80°C, with a working range at least 5°C above ambient - Precise control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT displays - Natural convection system for uniform temperature distribution, ensuring optimal results - Electronically adjustable air flap allows for admixture of pre-heated fresh air - Includes AtmoCONTROL software for managing and organizing data via Ethernet or USB interface - Safety features include adjustable electronic overtemperature monitor, AutoSAFETY system, and audible/visual alarms The Memmert IN55plus Natural Convection Incubator 53L, 115V offers precision and reliability for a wide range of laboratory needs. With an internal volume of 53 liters (1.9 cu.ft.), it provides ample space for your samples, all while maintaining a temperature range of +20°C to +80°C. The incubator is equipped with two Pt100 sensors in a 4-wire-circuit for mutual monitoring, ensuring highly accurate temperature control. Its advanced ControlCOCKPIT with TwinDISPLAY provides user-friendly operation, allowing you to adjust parameters like temperature, air flap position, and program time, all displayed on high-definition TFT screens. Designed with natural convection, this incubator ensures uniform temperature distribution without the need for a fan, making it ideal for delicate samples. The electronically adjustable air flap allows for precise control of fresh air admixture, ensuring optimal conditions. Safety is a priority with features like adjustable overtemperature protection, the AutoSAFETY system, and audible/visual alarms. Additionally, the Memmert IN55plus includes AtmoCONTROL software, enabling efficient data management through USB or Ethernet connections. INCLUDED: TheMemmert IN55plus Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

Eco Chemie BV Metrohm Autolab SPR Biosensor Instrument with Software & Manual This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. The instrument is supplied with the manual and software. It is in good cosmetic condition with minor marks from use.

This item has just arrived in our stock. Please enquire for further details.

IKA Pette Vario 10 - 100ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 10 - 100ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 10 - 100ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range10 - 100 µlIncrements0.1 µlAccuracy (Nominal Volume µl / %) ± 0.8 µl / 0.8%Precision (Nominal Volume µl / %)± 0.2 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 0.5 µl / 1%Precision (50% of Nominal Volume µl / %)± 0.15 µl / 0.3%Accuracy (10% of Nominal Volume µl / %)± 0.3 µl / 3%Precision (10% of Nominal Volume µl / %)± 0.1 µl / 1%