Safety cabinet COMBISTORAGE UNDERBENCH 500 620h CHEMISAFE

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was su (more)rplus to requirements. Included are; 1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction UnitPart no. 10007330 1 x Foss Tecator 2050 Drive UnitPart no. 10007338 The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit. The item is in reasonably good cosmetic condition with some marks from use.

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages

Selecta Agimatic-S magnetic stirrer. Analogue, without heating, 145 mm Ø upper plate, 10 L stirring  (more)capacity and adjustable speed from 60 to 1600 r.p.m. with electronic regulation. Analog Magnetic Stirrer J.P. SELECTA Agimatic-S. - Without heating (s/c). - Original design, functional construction, with epoxy-coated light alloy injected cabinet, with a 145 mm Ø upper plate, adaptable safety ring and intermediate body that acts as an overflow and thermal separator, in stainless steel. AISI 304. - Easy replacement upper plate. - Front control panel protected against splashes and facing the user. - Electronic speed regulation from 60 to 1600 r.p.m. at constant torque, which is maintained regardless of the viscosity of the fluid. - Electronic circuits free of parasites, modular and easily replaceable

MAS.1 Y device is an electromagnetic weighing module of high resolution, equipped with Y touch panel (more) featuring 5.7" display. The device can be integrated into a weighing system of the customer. Solid construction and advanced electronics ensure great adaptability both when fitting the module into the technological line and building it into the customer device. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2×USB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi

Refurbished Hettich Universal 320 R, refrigerated Centrifuge. Great condition - great price. 6 month (more)s warranty. Includes: - Hettich 320 R refrigerated centrifuge - Swing-out rotor Hettich 1624 - 4 round buckets Hettich 1481

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

Chemical-resistant vacuum pump consisting of N 820 G diaphragm vacuum pump, base plate, separator on (more) the suction side and high-performance condenser on the pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 1,2 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device feature (more)s a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes. Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. The calibration procedure for a 12-channel pipette takes less than 20 minutes, not six hours, on this instrument. When purchasing the AP-12.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, two pumps: a single-channel pump and a four-channel pump The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

Pfeiffer OmniControl 200 Vacuum Controller with PKR 361 Gauge, 25 KF Measurement Cable 3m Flange DN  (more)25 ISO-KF Measuring Method Pirani; Cold cathode Features - Efficient 3 m measurement cable length for optimal setup flexibility - Durable Anode: 130727 for long-lasting performance - Easy to read 3.5 in. display ensures simplicity of operation across users - Operating temperature range of 0 to 50°C for reliability in a variety of environments - Compatible PKR 361 Gauge has a measurement range of 1x10-9 The Pfeiffer OmniControl 200 Vacuum Controller with PKR 361 Gauge, 25 KF offers precision and reliability, featuring a 3-meter measurement cable for flexible installation and a durable Anode 130727 for long-lasting performance. Utilizing advanced Pirani and Cold Cathode measuring methods, it is equipped with a PKR 361 Gauge and a DN 25 ISO-KF connection flange for accurate readings. The easy-to-read 3.5-inch display ensures user-friendly operation, while the operating temperature range of 0 to 50°C provides versatility and dependable performance in a wide range of environments.INCLUDED: The Pfeiffer OmniControl 200 Vacuum Controller with PKR 361 Gauge, 25 KF includes: - Full Range PKR 361 Gauge - Measurement Cable - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Neon Transfection System enables fast and efficient delivery of nucleic acids into all mammalian (more) cell types, including primary, stem, and difficult-to-transfect cells. The flexible and open system allows the user to perform high-quality transfections using optimized or user-defined protocols in three simple steps with as few as 2 x 104 cells per reaction. A novel reaction chamber provides a dramatic increase in transfection efficiency and cell viability. The Neon Transfection System is: Efficient – up to 90% in many cell types, including difficult-to-transfect cells, primary, and stem cells Flexible – easily transfect from 2 x 104 cells to 6 x 106 cells per reaction Simple – easy to use, with a single reagent kit for all cell types Versatile – open system allows electroporation parameters to be optimized freely Specifications Format: Electroporation Pipette Tip System: Neon Transfection System Cell Type: Established Cell Lines, Hard-to-Transfect Cells, Stem Cells, Primary Cells Power Limit: 300 W Current Limit: 3.0 – 6.0 A Reaction Time: 1 sec Voltage Limit: 0.5 – 2.5 kV Classification: Animal Origin-Free, Reduced Serum, Chemically Defined, Low-Protein, Reduced Growth Factors, Xeno-Free Serum Compatible: Yes Compatible Products: Transfection Grade Nucleic Acid purification kits, siRNA vectors, DNA vectors Sample Loading Volume: Depends on kit used Sample Type (Specific): Plasmid DNA, Synthetic siRNA Purity or Quality Grade: Transfection Grade Starting Material (Cell #): 2 x 104 – 6 x 106 cells; Varies by cell type