Beckman Coulter Biomek NXp Laboratory Automation Workstation Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

FURTHER DETAILS TO FOLLOW

Packard Multiprobe ll EX Robotic Liquid Handling System This was removed from a university lab where (more) it was surplus to requirements. The system powers up and operates but a fault was discovered during testing. The report " Encoder not detected on four tip arm Z1 motor" is displayed and halts the self-test. It is in good cosmetic condition with marks from use but is sold for spares/repairs. Included with it are; Dell Optiplex 745 PC running on Windows XL with WinPrep software for handling systemDell 17" monitorDell windows keyboardA collection of deck holding plates and reservoirs for handling systemTwo original user manualsPower and connecting cables

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a unive (more)rsity lab where it was surplus to requirements. The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed. Includes the following: 1 x case of 96 Tecan Series Disposable Tips order No. 612 512.11 x Gemini Software Manual V3.101 x Tecan EVOware Training handbook1 x Gemini Software Training Course booklet1 x Genesis RSP Operating Manual1 x Genesis Instruments Setup and Service Manual V4.1

Perkin Elmer Victor3 1420 Multilabel Counter & Liquid Dispenser This was removed from a universi (more)ty lab where it was surplus to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. Model - Victor 3PN - 1420-012SN - 4207484 Liquid DispenserPN - 1420-2550SN - 420250011 Both units are connected together and both power on. Comes with:-RS232 CableARCNET CableSoftware/Manual:-1420 Software Version 3.0 Revision 5 (1086 3390-40 D)WorkOut2 Data Analysis Software Version 2.0 (1420-3050)1420 Multilabel Counter Instrument Manual

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

p=0…1.5 bar 230V 5.5 VA 3x including foot pedal 1x w/o foot pedal

A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg Capacity 220 g Readability 0.000 (more)1 g Repeatability 0.0001 g Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AE Analytical Balance ensures high-precision measurements with a capacity of 220 g and a readability of 0.0001 g. This balance features a fanless ionizer, standard in AE models, which effectively neutralizes static charges without physical contact, ensuring disturbance-free weighing. Additionally, it comes with an external IR sensor that facilitates precise and convenient measurements by enabling users to interact with the balance without direct contact, thus maintaining cleanliness and accuracy. Its Electronically Controlled Load (ECL) management allows for repeatability testing and automatic precision checks without the need for external weights, further enhancing the reliability of measurements. The balance is designed with a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput environments where time and accuracy are paramount. This advanced analytical tool simplifies daily operations and compliance with USP41 standards by alerting users when sample sizes are below minimum weight, which minimizes waste and maximizes efficiency. The balance's impact shock detection and overload protection systems safeguard the unit from accidental damage, ensuring long-term reliability and consistent performance. Additionally, operational simplicity is achieved through six straightforward keys and a quick toggle function that allows seamless switching between USB and RS-232C communications, catering to various laboratory data management systems. Further enhancing its usability, the GX-224AE is equipped with an illuminated, front-mounted level for easy leveling even when wearing gloves, and it offers both automatic self-calibration and one-touch internal/external calibration to guarantee valid results. The balance's extensive range of measurement units and its ability to perform percent calculations and piece counting adds to its versatility, making it suitable for a wide range of scientific applications. With its robust design and advanced features, including the supplemental IR sensor, the A&D Weighing Apollo GX-224AE Analytical Balance is a superior choice for professionals seeking precise analytical capabilities. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Memmert UF260plus Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambi (more)ent up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 256 L (9.04 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF260plus Forced Circulation Oven 256L, 115V provides a large working chamber with a capacity of 256L (9.04 cu.ft.), making it ideal for a wide range of applications that require precise thermal processing. With a working temperature range from 10°C above ambient up to +300°C, and high-resolution displays for monitoring, this oven ensures accuracy and flexibility in temperature settings. Equipped with the advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays and a multifunctional PID-microprocessor controller, users can easily control parameters such as fan speed, air flap position, and program time. The Function SetpointWAIT ensures that the process only begins once the desired temperature is reached, enhancing operational efficiency. Safety is a top priority in the UF260plus, with features like an overtemperature monitor (TWW), adjustable temperature limiter (TWB), and a mechanical temperature limiter (TB), all designed to prevent overheating. The AutoSAFETY system includes integrated over- and undertemperature monitoring "ASF," which adjusts automatically and provides alarms in case of temperature deviations. This oven's stainless steel interior, reinforced with deep-drawn ribbing and integrated heating on four sides, ensures even heat distribution and easy cleaning. Advanced AtmoCONTROL software allows for seamless programming and data management via USB or Ethernet, making the UF260plus an excellent choice for professionals requiring reliability and precision in thermal processing. INCLUDED: TheMemmert UF260plus Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty