ELMI Fugamix CM-70M-09 Mini Centrifuge 9000RPM 12x1.5 12x0.5 12x0.2ml 70.2 Rotor

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab This was removed from a (more) university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. No buckets are supplied. Maximum RPM: 5650. Maximum Load: 2 x 500g.

MSE Mistral 3000I Centrifuge This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up but has issues running. It initially ran, but then went into a 160rpm limp mode. It is sold for spares/repairs.

Sorvall Legend RT Centrifuge This system was removed from a university lab where it was surplus to r (more)equirements. The unit powers on, but it shows Error 21 when attempting to spin, causing the unit to cut out. The refrigeration system functions well, and the unit is in good cosmetic condition with minor marks. Due to the error, this item is listed as Spares/Repair. The unit is fitted with the following rotor: - Sorvall Rotor - P/N: 75006445 - S/N: 004061 Includes:- 4 x Sorvall Swinging Buckets - P/N: 75015679

Eppendorf Minispin Centrifuge with F-45-12-11 Rotor The Eppendorf Minispin Centrifuge is a small, bu (more)t versatile centrifuge suitable for just about any laboratory environment. With a maximum speed of 13,400rotations per minute and a maximum RCF of 12,100 x g, the Eppendorf Minispin iscapable of spinning small samples with exceptional speed and force. At only 9.8 pounds, the Eppendorf Minispin isextremely portable and can be used in the field with ease. Similarly, its compact size makes the Minispin versatile within the lab and field, capable of being within arms-reach of a computer or workstation, without procuring a bulkyfootprint. The Eppendorf Minispin Centrifuge with F-45-12-11 rotor is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 6 Month Parts and Labor WarrantyEppendorf Minispin Centrifuge with F-45-12-11 Rotor SpecificationsMaximum Speed13,400 rpmMaximum RCF12,100 x gMaximum Capacity12 x 1.5/2.0mlDimensions8.9 W x 9.4 H x 4.7 L in.Weight9.8 lbs.Noise LevelUnder 49 dBaElectrical120V/50-60Hz

Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor The Eppendorf 5430R Refrigerated Centrif (more)uge w/ Selectable Rotor is a sophisticated and versatile laboratory device, tailored for a broad range of applications. It boasts a maximum speed of 17,500 RPM and a minimum speed of 100 RPM, coupled with an impressive maximum relative centrifugal force (RCF) of 30,130 x g. This centrifuge can accommodate various sample sizes with its maximum capacity of 48 x 1.5/2.0 ml or 6 x 50 ml. It features a broad temperature range from -11°C to +40°C, making it suitable for temperature-sensitive samples. The centrifuge is equipped with a timer that ranges from 30 seconds to 9:59 hours, including a continuous run option. Designed for user convenience, it includes a soft-touch, one-finger lid closure for ergonomic operation. The operation menu is menu-driven and multilingual, offering options in English, German, French, and Spanish, and is complemented by a large backlit display for ease of use. The device allows for quick access to routine programs with its five program keys and can save up to 50 user-defined programs. Enhanced safety features include automatic rotor recognition and imbalance detection. Additionally, the Eppendorf QuickLock System enables quick and easy opening and closing of the rotor lid, streamlining the workflow. INCLUDED: The Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor includes: - Selectable Rotor - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor SpecificationsMaximum Speed17,500 RPMMinimum Speed100 RPMMaximum RCF30,130 x gMaximum Capacity48 x 1.5/2.0 ml or 6 x 50 mlTemperature Range-11°C to +40°CTimer30 seconds to 9:59 hours, with continuous runNoise Level< 56 dB(A)Maximum Kinetic Energy10,000 JDimensions (W x D x H)14.9 x 25.2 x 11.7 in. (38 x 64 x 29.6 cm)Weight123.5 lb. (56 kg)Electrical Requirements120V, 50/60Hz, 6A, 475WDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor The unique rotor design  (more)of the new MyFuge 12 Plus eliminates the need to switch rotors (or use a separate centrifuge) when changing between microtubes and PCR strips. The included, COMBI-Rotor allows for simultaneous centrifugation of up to 12 microtubes and/or 4 PCR strips.In addition, the MyFuge 12 Plus features a large digital display with adjustable speed (up to 7,000 rpm) and a digital timer. With built in rcf conversion, speed can be set/displayed in rpm or rcf.The MyFuge 12 Plus combines power with intuitive functionality making it the perfect companion in any laboratory.INCLUDED: The Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor includes: - Power Cord - COMBI Rotor - Two Year Manufacturer's Warranty

GuySon Sandblaster Model- 800 GloveBox And Filter This item was removed from a university where it w (more)as surplus to requirement. It is in good cosmetic condition, and powers on. However, the motor requires manual assistance to start, and the suction is very weak.It is likely that a new motor or extraction unit is needed for optimal performance. Therefore, this item is listed as Spares/Repair. SandBlaster:Model- 800S/N- 88066 Also includes: Filter:Model- 40DCS/N- 08875

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus t (more)o requirements. The unit powers up but shows the following error. M26 - LAMP COOLING BLOWER FAILURE.The manual states: 1. The blower is bad.2. The blower relay is bad.3. The airflow switch is bad. We have been advised that the system is missing some essential parts. These parts are available from the manufacturer. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs due to the error.

Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF)Features - Utilizes pos (more)itive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The MINIPULS 3 Pump (Drive Unit) with Four Channel, High Flow Head (R4/HF) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW