BD Biosciences ACCURI C6 Cell Sorter System Lab

Thermo Scientific Spinnaker Robotic Arm F01981 Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate. This item also includes the following: - Emergency Stop Button - MicroPlate Mount - Data Cable

This Molecular Devices ImageXpress Micro System was removed from a university lab where it was surpl (more)us to requirements. 1 x Molecular Devices ImageXpress Micro.The unit is fitted with the Transmitted Light Option.It also comes with the ImageXpress Micro Options controller (Environmental Controller).And the dedicated power supply. 1 x Sutter Instruments Xeon Lamp unit with liquid light guide.Also comes with manual and a spare used/unknown bulb. Unit comes with the following objectives in a Black Peli case. 1 x Nikon Plan UW1X/0.04∞/- WD 3.2 1 x Nikon Plan Fluor10X/0.30DIC L/N1∞/0.17 WD 16 1 x Nikon S Plan FluorWLWD 20X/0.45Ph1 ADM 1 x Nikon Plan Fluor10X/0.30Ph1 DL∞/1.2 WD 15.2 1 x Nikon S Fluor4X/0.20∞/- WD. 15.5 1 x Nikon Plan Apo2X/0.10∞/- WD 8.5 Also included in the system: 2 x PC's with monitors:1 (Dell) is the original unit that no longer contains any relevant software.The other (Stone) was originally being used with the system but without a monitor.It contains the ImageXpress software (3.1.0.97) that controls the Micro unit.1 monitor appears to be faulty, the other works fine. 1 x Molecular Devices software box that contain various software and a pair of dongles for the PC. 1 x Black Peli Case that houses the objectives, test slide etc. 1 x Box containing all the connector cables. 2 x Pieces of ducting for the environmental control and the exit of the Xeon lamp. The system has been fully checked by a Molecular Devices engineer. It was reported as being in good working order. The MetaXpress PC is was used by the engineer to perform the checks on the system.We are able to supply the full engineer report on the ImageXpress Micro unit. It might also be possible for us to offer a full installation package, training and other services with the system (for an additional charge). Please enquire for more details.

Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 10L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing our Yamato Programmable Vacuum Drying Oven, a compact and versatile solution ideal for laboratory settings. This 10L, 115V oven offers advanced features designed to enhance safety and efficiency. With easy parameter input and a digital PID controller supporting various temperature modes, including fixed temperature, quick auto-stop, auto-start, and program operations, your experiments will run smoothly. Safety is paramount with self-diagnostic and overheating prevention functions, while the silicon rubber door seal ensures an airtight chamber. Individual overheating prevention devices for each circuit add an extra layer of protection, and the oven is customizable with N₂ gas inlet and communication ports. Plus, the calibration offset function ensures precision, and easy maintenance keeps your equipment in top condition. Safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, and temperature measurement error prevention.INCLUDED: The Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V includes: - Shelf Plate (2 pcs.) - Power Cord - One Year Manufacturer's Warranty

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW