BD Accuri C6 Flow Cytometer Lab

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with only minor marks from use. The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault. The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed. Guavasoft 3.1 has also been installed, which includes:ViaCount.InCyte (This requires an unlock code from Millipore to run).easyCheck.Guava Clean 3.1. We have been able to open and close the sample tray. This proves that the system is fully connected. It is sold for spares/repairs.

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university (more) lab where it was surplus to requirements. The microscope focus motor/Z-Drive has been removed from this unit. We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs. Included in the system are; 1x GE IN Cell Analyzer 1000: Dims: L85cm W70cm H70cmThe unit is in good cosmetic condition. When connected up to the power supply we could not hear the unit power on.Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up. 1x GE IN Cell Analyser 1000 Kinetic OZ EnabledModel No. 28-4051-29System No. 1316043The unit powers on and is in good cosmetic condition.The fans are working, they can be heard powering up immediately once the unit is powered on. 1x GE IN Cell Analyser 1000 ENDPNT OZ EnabledModel No. 28-4051-28System No. 1358008The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it. The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed. EMKA Keys:Model 2233X2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled2x keys for the GE IN Cell Analyser Kinetic OZ EnabledAll 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units. We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other. 1x Optigrid Light Imaging System:Model QIOPTIQThe unit powers on and is in good cosmetic condition. 1x Xenon ARC Lamp Power supply w 2x keys:Type 6Part No. 56409187The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly. Keys:model No. 901The units are in good cosmetic condition 2x MVP Series Power supplies. ( 1x in each rack unit)Model Nos. MP8-3Q-1L-00Both units power on and are in good cosmetic condition. There is dust around and on both units from general use. 1x Hamilton power supplyModel No. 231352/00The unit powered on and is in good cosmetic condition. 2x APC rack PDUThe units power on and are in good cosmetic condition. 1x GE cO2 Controller:Ser No. 1352436The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit. 2x Hewlett Packard PC's: HP workstation xw6200:The units both power on and are in good cosmetic condition.There is some dust around the units from general use. Programs on PC:•Overlord 2Version 2.1.0.0 •IN Cell Analyser 1000 3.5•IN Cell Analyser 1000 3.6The program is password protected and we could not get past this window to access other parts of the program. 'Shutter Counter 1984048'. 3 x Low Voltage Computer Cables:•28-4060-63 Umbellcal Axis 0734•28-4060-66 0647•28-4060-68 Umbellcal Hamilton 0738 1x Xenon lamp Bulb:Model OSRAM XBO 100W OFRThe box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

This GE Healthcare Life Sciences IN Cell Analyser 1000 System was removed from a university lab wher (more)e ti was surplus to requirements. The unit powers up but in testing we found an issue with the Liquid handling system's y-Drive. It is showing Error 42 - step loss encoder. We were unable to test it any further due to this and the software will not fully start up. It is in otherwise good cosmetic condition with minor marks from use.

The Countess 3 Automated Cell Counter is a benchtop cell counting system equipped with an advanced m (more)achine-learning algorithm, ruggedized optics, fully-automated focus and lighting, and image analysis software for rapid assessment of primary and immortalized cell samples. Capacity: 2 samples per slide Detection Method: Brightfield Memory: On Board, USB Drive Sample Type: Immortalized cell lines & primary cells For Use With (Application): Cell culture & analysis workflows For Use With (Equipment): EVOS microscopes, Attune flow cytometers Dimensions (LxWxH): 229 x 229 x 140 mm Weight: 3.6 kg

Imaging performance Cell size: 5 – 300 microns (Cellometer CHT4-PD300 Slides are required for cells  (more)> 80 microns in diameter) Concentration range: 105 – 107 cells/ml Bright field imaging, fluorescent imaging and pattern-recognition software to quickly and accurately decluster, identify and count individual cells Fluorescent optics Excitation/Emission: 470nm/535nm Example fluorophores: Acridine Orange (+DNA) Calcein AM CFDA SYTO 9 SYTO 13 Excitation/Emission: 540nm/605nm Example fluorophores: Propidium iodide Ethidium bromide Dimensions (WxDxH): 280 x 300 x 330 mm Weight: 11.8 kg

Adapter for erlenmeyers of 2L of Choice.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 100 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Polyscience P40N7A101B IP-35 Immersion Probe Cooler, 3 Rigid Coil Probe, -35 to +40C, 120V, 60Hz3D V (more)isualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P40N7A101B IP-35 Immersion Probe Cooler, -35°C to 40°C, 1081W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA myPlate Speed Range 100 - 2,500 RPM Maximun load 3 kg Setting accuracy speed 10 rpm Features - H (more)igh chemical resistance ensures durability and reliability in various laboratory environments. - Electronically controlled motor for precise and consistent stirring performance. - Digital speed indicator provides clear and accurate speed readings. - Set-up plate made of glass for durability and heat resistance. - Compact dimensions (152 x 30 x 164 mm) and lightweight design (0.76 kg) for portability. IKA myPlate combines the excellent technical features of the popular and proven IKA magnetic stirrers colour squid and big squid with the option of creative individualization. Personal interchangeable frameDesign the set-up plate of the IKA myPlate by yourself. You receive the device with a decorative image template, that can be exchanged easily through the convenient interchangeable frame. Some people have family photos on their desk - you convert one of the best magnetic stirrers from your day-to-day lab work into a canvas for your favorite pictures. Proven high functionalityApart from stirring your samples with IKA myPlate on a creative surface, you get all good features of this strong stirrer, just as you are used to from IKA.INCLUDED: The IKA myPlate includes: - IKA myPlate - Blank photo papers (10 pcs.) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2122-N-500 qMAX Probe One-Step Multiplex RT-qPCR Kit, No Rox, 500 Reactions qMAX Probe One (more) Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2122-N-500 qMAX Probe One-Step Multiplex RT-qPCR Kit, No Rox, 500 Reactions includes: - 5x1ml reaction mix, 5x100μl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Will fit the VWR Standard/Advanced 5000 shakers 4 adjustable cushioned rollers to hold glassware sec (more)urely Dimensions (WxDxH): 764×459×353 mm