Temperature sensor / probe PT 1000 6.1110.100 METROHM

2 racks of 24 stainless steel test tubes D: 20/21mm In stainless steel 2 laboratory racks of 24 tube (more)s (6 out of 4) For tube diameter: 20 or 21 mm

Miele Professional G 7883 Lab Glassware Washer The unit did not power up in testing. It is sold for  (more)spares/repairs. It is in good cosmetic condition with minor marks.

BBL GasPak 100 anaerobiosis jar. Capacity 2.5 L jar. Vented lid with ''O'' ring gasket, a clamp/thum (more)bscrew assembly, a catalyst reaction chamber, two catalyst charges, one 12-place dish rack for 100 x 15 mm dishes, and one 13-place, 13 mm tube holder.

It allows the observation of samples without losing temperature.

Technical specifications:

Like new! Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overst (more)ocked item, returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. - Recommended for standard applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 2.5-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute

This LabTech LT-3500 Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and runs through the cleaning cycles, though they cannot be completed without the cleaning bottles. It was not tested further. It is in reasonably good cosmetic condition but the screen is slightly damaged. It is still responsive and mostly readable though.

Beckman Coulter Rotor Type 50.2 Ti This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, we are unable to test it further at our facility. Features:- Type - 50.2 Ti - Max RPM - 50,000 - The Unit Has 12 x Slots For Vials - Only Use in Instruments Classified H, R, S

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 15,200 R (more)PM Maximum Capacity 44 x 1.5/2.0ml or 12 x 5ml Warranty 2 Year Manufacturer's Features - Easy-to-turn rotary knob for parameter adjustments - Waterproof keypad provides protection that helps significantly increase the lifespan of the product - One-touch toggling between speed, g-force, and temperature controls - Refrigeration capabilities from 40°C to -20°C - Cools down from 23°C to 4°C in less than 10 minutes - Pre-cool feature quickly lowers temperature of the rotor and chamber before a run - LCD display which projects information in real-time - View and adjust user parameters from the main screen; no need to navigate through sub-screens - Powerful induction motor reaches speeds up to 15,200 RPM in less than 16 seconds - Maximum g-force of 21,953 RCF - 10 acceleration/deceleration settings - 99 memory sets for commonly used speed and time settings - Motorized lid-locking system prevents centrifuge from opening during operation - Rotor imbalance sensing system stops the motor should the rotors become imbalanced, protecting the user from spinning rotors Click Here to View Product Video The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge provides high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With refrigeration capabilities, 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, the FC5515R provides stable liquid separation for life science applications requiring high-speed operation. The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force, as well as control the temperature. A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly used parameters are a few of the FC5515R’s features that propel high-performance. Among the FC5515R’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from by the high-speed spinning rotors. Compatible with seven different rotors, more than any centrifuge in its class, the highly versatile FC5515R can be used for various applications of different volumes. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5515R Frontier Micro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty