Vacuum pumps

This item has just arrived in our stock. Please enquire for further details.

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where  (more)it was surplus to requirements. The system powers up but we were unable to test this further at our facility. It is in good cosmetic condition with marks from use throughout. Also included are the following:1x Circle Seal Control Solenoid3000 PSI 1x Busch PumpModel: KB 0010 D 100S/N: 01017631 1x Bio Rad PDS Voltage Converter1x USA Power Cable1x Australia/China Power Cable

Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in good working order but has not been tested under a vacuum. It is in good cosmetic condition with minor marks from use. It is supplied with; miniMACS Vacuum pump. Serial No. 2633819.miniMACS Footswitch assembly. Part No. A03107.Whitley DG250 Anaerobic Workstation User Manual.don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.don whitley scientific 500/1000 Anotox Sachet. Part No. A02129.don whitley scientific Natural Superflex Tubing. Part No. A00454.

Leybold Sogevac SV100B Model no. SV100 109 10 Rotary Vane Vacuum Pump This was removed from a unive (more)rsity lab where ti was surplus to requirements. The pump has been professionally serviced and recertified. It has had a new oil mist filter, oil filter and oil. It is in full working order. It is in excellent cosmetic condition.

Edwards iQDP80 Dry Vacuum Pump This item was removed from a university where it was surplus to requi (more)rement. It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair. Serial No.: M109880Model: 3XIQDP80Manufacturing Date: 21.11.00 Power supply cable & control module not included.

LC Technology Solutions SP-1 Stand-alone Solvent Purification System This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. We are told it was in good working order includes: -5x schafer solvent kegs - 5.16 USgal B (Max pressure 3 bar/ 43.5 PSIKegs manufactured 2016 -Welch Dryfast pumpModel- DryFast 20340-02S/N- 011700000778 -Operation manual

Applied Biosystems MDS SCIEX 4800 Maldi TOF/TOF Analyser with PC and Software This system was remove (more)d from a university lab where it was surplus to requirements. The system is in very good cosmetic condition. The 4800 Maldi analyser, PC, and Edwards vacuum pump powered on and operated as expected, but no further testing was carried out. Includes: - Applied Biosystems MDS SCIEX 4800 Maldi TOF/TOF Analyser - Assembly No. 1016033 - Serial No. AX011160607 - Edwards XDS 35i Vacuum Pump - Code A730-01-983 - Serial No. 119472090 - Running hours: 87122 - Dell Precision 670 PC (Serial No. 3JP5S91) - Running Windows XP Professional - Loaded with AB SCIEX 4000 Series Explorer Software version 3.7 - Dell Monitor (Serial No. CD-ODC323-71618-6AA-GAFG) - Dell Keyboard (Serial No. CN-OJ4628-71616-64P-OFWL) - Dell Mouse (Serial No. HCS61522770) Additional accessories: - 1 x Applied Biosystems/MDS SCIEX 4800 "Getting Started Guide" - 1 x GPS Explorer Workstation "Getting Started and Reference Guide" - 4 x Opti-TOF LC/MALDI Inserts (123 x 81 mm, Part No. 1018469) - 1 x Opti-TOF 384 well insert (Part No. 1016491) - 6 x data cables - 4 x power leads

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80. The system was rem (more)oved from a University Lab as surplus to requirements. This system powers up and is in good cosmetic condition, we are unable to test it further at our facility. Mackey Bowley Diffusion Bonder.Serial No. S9638/91Chamber Dimensions: L 58cm x W 38cm x H 38cm.Bed Dimensions: L 80cm x W50cm.Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.Edwards Speedivalve.Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.Eurotherm Controller Type 815 & 818 Installation Manual. Stenhoj Hydraulik 60 Ton.Type: 500414.Serial No. 63153.Model Year: 1991. Cheltenham Induction Heating Ltd.Type: TRI 12.Serial No. TRI2017. Instron Control Panel.Model: 1342.Serial No. H2003.Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.Display One Single Channel Vacuum Display Manual. Edwards High Vacuum Pump.Model: E2M 80.Serial No. 995.Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

Hiden Isochema Intelligent Gravimetric Analist+ DSMS Mass spec This system was removed from a univer (more)sity where it was surplus to requirement. All units power up and are in good cosmetic condition, we are unable to test the system further at our facility. The lab confirmed the system was working prior to removal. The system includes the following: Hiden Gravimetric Gas sorption analyserSN - HALIGA157Powers on, PC has MASsoft Professional Software installed. Hiden Analytical DSMS Dynamic Sampling Mass SpectrometerModel - HAS-301-414 PLSN/Ref - WR 12971 Hiden Analytical HAL301/3FSN - 3F2R-0/A/81447/E Edwards 1.5 PumpModel - E2M1.5Code - A371-32-919SN - 086277133 Vacuubrand Diaphragm Vacuum PumpModel - MD1SN - 31507705 Hiden Analytical Furnace Power ControllerPowers on Parts fitted:Hiden Analytical Model - HAS037001SN - 314001 Hiden Analytical Model - HA-092-0010SN - 310-003 Pfeiffer VacuumModel - TC600SN - 0829014257 Hiden Analytica Cryo Furnace Circulation UnitModel - HAS0221248SN - 314-001 Has 2 Vacuubrand Diaphragm Vacuum Pumps fitted and one spareModel - MD1 PC/Accessories:Dell Vostro 200Dell 19" Monitor & KeyboardIBM MouseAll Powers on Software discs:Hiden IGA Systems Software CD V2.148Hiden Analytical Software Suite v4.25Software USB - Has above software saved on usb Other accessories included:Blue case of screws & copper gaskets2 x Dilvac Dewar Flask & Containers 2 x 35cm1 x Dilvac Flask 12 x 23cmSmall Furnace - Model HAS0221267 - Unable to test Manuals:IGA Systems manualHiden Vacuum ManualsHiden MASsoft professional manual set

This Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spectrometer was removed from a university la (more)b where it was surplus to requirements. The system powers up and is in excellent cosmetic condition. It was confirmed by the lab that it was working when last used in December 2022, though it is out of service. Included in the system are; 1 x Thermo Scientific LTQ Orbitrap XL.1 x Thermo Scientific LTQ XL.1 x Thermo Scientific Neslab ThermoFlex 900.1 x Edwards 28 Vacuum Pump.1 x Edwards 30 Vacuum Pump.1 x Orbitrap Extractive Operations Training Course Manual.1 x LTQ Orbitrap Biotech Operations Training Course Manual.1 x Thermo Scientific LTQ Manual.1 x Thermo Scientific LTQ Orbitrap XL Hardware Manual.2 x Thermo Scientific LTQ Orbitrap XL 2.5.5 Software.1 x Thermo Scientific LTQ 2.6.0 SP1 Instrument Control.1 x Thermo Scientific Xcalibur 2.0.7 SP1.1 x JAI CV-A55 IR Camera & housing.

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immidate realese.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101  (more)Vibration frequency: 0 - 300 min⁻¹ Heating power: 1500 W Temperature Range: Up to 100°C W×D: 480×487 mm Included: Rack R-12 Polyvap (120ml) A condensation unit and bottle A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

Portable suction system, vacuum pump ROCKER BIOVAC 240 New equipment (never used) Max. vacuum : 720  (more)mmHg Max. flow rate : 38 l//min Hose barb : 3/16 inch Pump type: Piston Dimension (LxWxH) : 53x24x35cm Suction bottle：PC (3000ml)

KNF Mini diaphragm vacuum pump LABOPORT N 86 KT.18 Model: N86KT.18 100% oil-free pumping, so media c (more)annot be contaminated when pumping and evacuating Maintenance-free, quiet running Flow rate: 5.5 l/min Weight [kg] : 1.9 Dimensions W x H x D [mm] : 90 x 141 x 164 Ultimate vacuum (max.): 403mbar (abs.) found following our proper functioning test (see photo) Year of manufacture: 2007 Signs of wear and peeling paint in places

Portable suction system, vacuum pump ROCKER BIOVAC 240 New equipment (never used) Max. vacuum : 720  (more)mmHg Max. flow rate : 38 l//min Hose barb : 3/16 inch Pump type: Piston Dimension (LxWxH) : 53x24x35cm Suction bottle：PC (3000ml)

VARIAN DS 102 vacuum pump DS102 model Code: SQ 396 1725/1425 rpm 230 V 50/60 Hz 1/2 HP Vacuum limit: (more) 11.0 x 10-3 mbar (0.011 mbar) External dimensions (D)x(H)x(W): 42 x 14 x 24 cm Weight: 24Kg Without filter

VARIAN DS 102 vacuum pump DS102 model Code: SQ 396 1725/1425 rpm 230 V 50/60 Hz 1/2 HP Vacuum limit: (more) 11.0 x 10-3 mbar (0.011 mbar) External dimensions (D)x(H)x(W): 42 x 14 x 24 cm Weight: 24Kg Without filter

Diaphragm vacuum pump KNF N022AN.18 Final pressure/ultimate vacuum (abs.) (mbar): 181 mbar (see phot (more)o) Model: N022AN18 Technical specifications: Voltage: 230 V, 50 Hz Current: 0.7 A Power: 100 W Max. pressure: 4 Bar Pump flow rate: 15 l / min External dimensions (W) x (D) x (H): 28 x 20 x 23 cm Equipment tested Year of manufacture: 2007

MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar Ultimate Vacuum 253 mbar (more) (190 Torr) Pumping Speed 12 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a pumping speed of 12 L/Min for effective operation - Achieves a vacuum level of 253 mbar (190 Torr) for efficient performance The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump is designed for efficient and reliable operation in environments that require clean and uncontaminated air exhaust. This pump features an oil-free design with a built-in filter, ensuring that the exhausted air remains free from contamination. The MS-VP250 is equipped with an automatic cooling exhaust system, allowing for continuous 24-hour operation, making it ideal for demanding laboratory and industrial settings. Its pressure-adjustable design enables precise control of vacuum and gas velocity to meet specific application requirements. The pump's TEFLON surface treatment provides robust chemical and corrosion resistance, ensuring durability even when exposed to harsh gases. With an ultimate vacuum of 253 mbar (190 Torr) and a pumping speed of 12 L/Min, the MS-VP250 delivers efficient vacuum performance. It features 6 mm inlet and outlet flanges, operating within a temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, making it suitable for environments where low noise is essential. Its compact design, measuring 7.7 x 3.8 x 6.1 inches, and a weight of 7.6 kg, make it easy to fit into various setups. The pump is equipped with nitrile butadiene rubber valves for reliable operation and requires a motor power of 75W, compatible with electrical requirements of 110/220V, 50/60Hz. The MS-VP250's distinctive orange color not only enhances its aesthetic appeal but also signifies its robust anticorrosive and chemical resistance properties, making it a reliable choice for a wide range of vacuum applications.INCLUDED: The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical-resistant vacuum pump consisting of N 820 G diaphragm vacuum pump, base plate, separator on (more) the suction side and high-performance condenser on the pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 1,2 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 8 mbar (abs.) Pressure (max.) 1 b (more)ar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PTFE Applications Rotary evaporation Degassing Drying of the gel Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Chemically resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable Maintenance free ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical-resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate, separator on (more) the suction side and high-performance condenser on the pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical resistant vacuum pump consisting of N 820 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 1,2 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Vacuum oven Fluid suction Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemically resistant oil-free diaphragm vacuum pump used for a wide range of laboratory applications (more). It features PPS heads, PTFE lined diaphragms and FFPM valves. Technical features Flow rate (max.) 30 l / min Final vacuum (max.) 15 mbar (abs.) Pressure (max.) 0.5 bar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: PPS Applications Filtration Degassing Drying Fluid suction Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Small ecological footprint Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION