Edwards RV12 Rotary Vane Vacuum Pump

This listing is for 1 of 3 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

Edwards nEXT85D CF63 NW16 80W Turbomolecular Vacuum Pump The nEXT 85D pumps consist of the turbomole (more)cular pump with a permanently attached controller containing drive electronics.The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 D pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.nEXT 85D pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 D pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Features - Class leading performance in a reduced footprint - Enhanced customer choice with standard and compression focused variants - Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology - Additional flexibility from customised interstage and backing port position selection - 4 year service with full end-user field serviceability - CMSD enabled low vibration levels - Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration - Full suite of tailored accessories Click Here to View Product Video INCLUDED: The Edwards nEXT85D CF63 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a univer (more)sity lab where it was surplus to requirements. Included are; PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up. PFEIFFER Controller:Model TC100Mod no. PM C01 692A The unit is in good cosmetic condition

Edwards RV12 Vacuum PumpFeatures - The RV is a truly versatile pump for operation throughout for you (more)r operations, perfect for wet applications, dusty applications and clean dry applications. - The RV series of pumps has the highest vapour handling capacity of any rotary vane pump. This is ideally suited for your wet pumping applications such as freeze drying, extraction, filtration and gel drying. - The best-in-class anti-suck back protection prevents dust or oil mist from entering your system. The fast-acting automatic inlet valve acts within 0.4 seconds. - The universal motor in the pump covers the widest possible voltage and frequency range from a single motor. - You can service and replace parts without dismantling the pump mechanism. All parts self-align, eliminating the need for special assembly. Pump valve has "controlled" opening on power startup so that the system vacuum will never see a pressure surge on startup The RV uses a high-quality "universal" motor to cover the widest possible voltage and frequency range. A one-size Allen key is used to dismantle all parts of the RV pump. All rotor and stator parts are completely interchangeable The RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications.Click Here to View Product Video INCLUDED: The Edwards RV12 Vacuum Pump includes: - Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nXDS6iC Dry Scroll Pump Features - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS6iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS6iC Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

Ohaus Endeavor 5000 Series e-E51LDMP03 AM Light Duty Microplate Shaker Speed Range 100 to 1,200 RPM  (more)Maximum Capacity 4 Microplates or 2 Microtube Racks Orbit 3 mm Features - Compatible for use in incubators and cold rooms, enhancing versatility across experimental conditions - Features a triple eccentric drive and maintenance-free brushless DC motor for stable, long-term shaking - Bright, backlit LCD display with easy-to-navigate menu for speed, time settings, and advanced features - Integrated safety mechanisms with overload and unbalanced detection to protect samples - Equipped with RS232 interface for two-way communication, enabling data logging and unit control - Durable construction with chemical-resistant polymer housing and sturdy aluminum tray - Small footprint design with visual and audio alarms, and advanced microprocessor control for gradual speed increase to avoid splashing Click Here to View Product Video The Ohaus Endeavor 5000 Series Light Duty Orbital Shakers are a trusted choice for everyday laboratory shaking needs, designed to accommodate a wide range of applications from microbiology and molecular biology to food science and chemistry. These shakers come in three models, featuring either a 3 mm orbit, a 20 mm orbit, or a specialized microplate configuration, ensuring versatility for various research requirements. Each model is compatible with use in incubators and cold rooms, highlighting their adaptability to different experimental conditions. The shakers boast a durable, chemical-resistant polymer housing and a sturdy aluminum tray with multiple attachment points for accessories, making them both robust and easy to clean. A key feature of the Endeavor series is its triple eccentric drive and maintenance-free brushless DC motor, providing stable and accurate shaking over long periods. Safety is enhanced with integrated overload and unbalanced detection systems to protect valuable samples. The series is equipped with a bright, backlit LCD display that shows speed and time settings, including a timer with both count-up and count-down functions that automatically shuts off shaking when time expires. An easy-to-navigate menu and simple knob control facilitate operation, while the inclusion of a tray with a non-slip rubber mat, flask clamps, and tube racks enhances its utility. An RS232 interface allows for two-way communication for comprehensive data logging and control, ensuring these shakers meet the demands of modern laboratories. Additionally, design features such as visual and audio alarms, a small footprint to conserve bench space, and advanced microprocessor control for gradual speed ramping further underscore the thoughtful engineering behind the Ohaus Endeavor 5000 Series. Optional accessories like a universal platform and over 20 flask clamps and tube racks are available, making these shakers a versatile and essential tool for a variety of scientific studies. INCLUDED: The Ohaus Endeavor 5000 Series e-E51LDMP03 AM Light Duty Microplate Shaker includes: - 11 x 7.75 in. Microplate Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty