Vacuubrand PC 2001 Vario Vacuum Pump

This listing is for a Watson Marlow 520S Peristaltic Pump. The unit is in full working condition an (more)d is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm

This KNF Neuberger Laboport Diaphragm Pump Type - N840.3 FT.18 was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonably good cosmetic condition with some marks from use.

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nEXT300D - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connection  (more)DN100CF Pumping Speed Nominal 18,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300D - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Capacity: 2 x 96- or 384-well PCR plates Maximum speed: 2,500 rpm ±10% Maximum RCF: 500 x g Dimensio (more)ns: 190 x 220 x 186 mm Weight: 2.6 kg

The Cedex HiRes Analyzer is a fully automated, image-based cell analyzer providing information about (more) cell concentration, viability, aggregates, and morphological parameters, such as cell diameter and cell compactness. For cell counting the analyzer uses the well-established Trypan Blue Exclusion Method and a high resolution image scanner to analyze cells and objects. Integrated Multi Sampler for single samples and multiple runs High resolution scanner technology Detectable cell diameter 2 – 40 µm Detectable cell density 5×10⁴ – 1×10⁷ Automated cleaning and maintenance procedures Conforms to GMP regulations, such as 21 CFR part 11

This Perkin Elmer HPLC Liquid Handling DC Motor and Vacuum Control Unit was removed from a universit (more)y lab where it was surplus to requirements. Both units are in good cosmetic condition and powered up. We are unable to test either unit further at our facility. Power supply included.

Next Advance Bullet Blender Storm 24 model BBY24M-CE Homogeniser This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition but has some cosmetic cracks in the plastic on the back of the unit. Capacity 24 x 1.5 ml screw cap tubes

Incubator CO2 BJPX-C Series. Models: 50 L (BJPX-C50), 80 L (BJPX-C80) and 160 L (BJPX-C160). Shirt  (more)air (optional for BJPX-C160 water jacket). Temperature range RT+5 to 60ºC. Stability ± 0.2 ° C uniformity (at 37ºC) ± 0.3 ºC. Range CO2 0 - 20%. Control, CO2 by infrared sensor. Sterilization by UV lamp, model shirt ire (optional water jacket).Timer 999 h, or continuous. Alarm of over-temperature and levels of CO2. Two trays are adjustable. Chamber of stainless steel. It shows the price for the model 50 L (BJPX-C50). For other models, use the drop-down.

Edwards nXR60i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW40 Peak Pumping Speed 60 m 3h-1 Features - Delivers a peak pumping speed of 60 m³/h, ensuring efficient vacuum operations - Maintains a leak tightness of < 1x10⁻⁶ mbar l/s, ensuring reliable vacuum integrity - Weighs only 29 kg (64 lbs), facilitating easy transport and installation - Designed to fit under benchtops, optimizing laboratory space - Ensures a clean, oil-free operation, reducing contamination risks - Keeps the vacuum chamber free from dust, maintaining a clean environment - Offers design flexibility for R&D and industrial applications - Provides reliable vacuum performance over long periods, ensuring operational stability - Simple setup and operation make it accessible for users at all skill levels Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR60i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty