KNF SC 920 G Vakuumpumpsystem Vacuum Pump System Vakuumpumpe

Cole-Parmer Masterflex 7521-47 Peristaltic Pump with Dual Easyload 7518-10 Pump Heads Manufacturer:  (more)COLE PARMER Maximum speed of 600 rpm. Voltage: 220-240V Current: 1.5A Console Player Type: Masterflex Model 7521-47 Pump head type: 2 Masterflex Easy-load 7518-10 heads External dimensions (L) x (D) x (H): 40 x 19 x 19 cm

This Vacuubrand MZ 2CE Membrane Diaphram Vacuum Pump was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good cosmetic condition with marks from use.

This Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 was removed from a university lab wh (more)ere it was surplus to requirements. The pump has been tested with a controller (not included) and is in working order, but has not been tested under a vacuum. It is in good cosmetic condition with minor marks from use.

Varian Turbo-V 250 Macro Torr Pump System This system was removed from a university where it was sur (more)plus to requirement. All elements are in good cosmetic condition and the blades move freely on the Varian Turbo-V 250 Macro Torr Pump. We are unable to test further at our facility. All items included in the system: 1 x Varian Turbo-V 250 Macro Torr Pump:Model no. 9699008S016 1 x Multigauge controllerPart no. V209600 1 x Varian Turbo-V250 C.U Pump controller:Model no. 9699425S004 1 x Multigauge RS232 Board instruction manualPart no. L6439309 1 x Turbo-V 250 Controllers Instruction manualModel 969-9423Model 969-9523Model 969-9425 1 x Turbo- V 250 Pumps Instructional manual969-9007 Series969-9008 Series All cables shown in the images are included.

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel The Gilson MINIPULS 3 Peristaltic Pump Head (more), R4 Four Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Frame intended for 4-load-cell powder-coated scales C6, that are to be embedded in the ground.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus EX1103 Explorer Toploading Balance The OHAUS EX1103 Explorer Precision Balance with 1100 gram  (more)weight capacity, has newly optimized linearity and repeatability specifications and enhanced vibration filtering for better balance stability. All Explorer models also come standard with AutoCal automatic internal calibration. These combined enhancements improve accuracy, efficiency, and throughput. A large color touch-screen display, icon-driven application software that features 14 unique application modes, and an adjustable angle display make the OHAUS Explorer series the easiest to use, most advanced balance in its class today. The base and terminal of the Explorer EX1103 separate for maximum flexibility in any work area. It also has four user-programmable touch free sensors to minimize cross contamination and button wear. Click Here to View Product Video INCLUDED: The Ohaus EX1103 Explorer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty