VACUUBRAND ME 4R NT Diaphragm Pump

KNF UN840.1.2FTP IP44 Diaphragm Pump Ultimate Vacuum 90 mbar (abs.) Maximum Flow Rate 65L/min (3.9  (more)m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free Thechemically-resistant UN840.1.2FTP diaphragm pump is a oil-free deviceused in a wide range of laboratory applications. These pumps transfer and pumpdown without contamination.The heart ofthis very compact pump is a KNF structured diaphragm. This patented diaphragmwas stress-optimized using the Finite Elements method. As a result, we wereable to make the pump smaller while increasing the service life of thediaphragm and improving performance. This pump is 115V. INCLUDED: The KNF UN840.1.2FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND MZ 1C Chemistry Diaphragm Pump Ultimate Vacuum 12 mbar / 9 torr Maximum Pumping Speed 0.5 (more) cfm at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - Convenient, quick and simple to use due to the top mounted power switch. - Optimized vacuum even with gas ballast for continuous purge. - Whisper quiet and very low vibration. - Maintenance-free drive system and proven long diaphragm life. Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The MZ 1C pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. Two-stage chemistry-design diaphragm pumps are an excellent choice for continuous, oil-free pumping of gases at medium vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are rotary evaporators, gel dryers, filtrations and many other lab applications. The MZ 1C is a powerful pump for smaller vacuum apparatus enabling continuous pumping of solvent vapors. It´s a compact, stand alone pump with low ultimate vacuum. If the process requires atmospheric condensation of pumped vapors or electronic vacuum control, we recommend the pump families based on the MZ 2C NT or MD 1C. INCLUDED: The VACUUBRAND MZ 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The VT 4.16 is a medium vacuum, dry displacement pump designed to operate on a continuous duty basis (more). It utilizes self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change. Speed (50/60 Hz): 1420/1700 rpm Inlet capacity (50/61 Hz): 16/19 m3/h Vacuum: – 850 mbar

TSP HPLC P4000 + AS3000

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

GILSON MiniPuls 2 Peristaltic Pump 1 channel only Voltage: 220-240V, 50/60Hz Standard flow rate: 0.3 (more) µL/min – 30 mL/min at maximum pressure 0.5 MPa Continuous flow Forward and reverse movement.

Brady’s IP Thermal Transfer Printer is a smart solution for printing high-quality labels. The Brady  (more)IP Printer is a fully integrated and easy-to-use printer, label and software system. The printer, labels and ribbon communicate with each other using SmartCell technology. The system has several features such as material recognition, automatic formatting and easy-to-use features for printing labels, sleeves and tags. The Brady IP Printer detects when labels and ribbon are loaded and displays user information on the LCD screen. The label information is sent to the software, which automatically completes the template and settings. Create data in the template, then lock and print. Load, lock and print. Barcode type: Codabar, Codablock F, Code 128A, Code 128B, Code 128C, Code 39, Code 93, Deutsche Post Identcode, Deutsche Post Leitcode, EAN/UPC Extension 2, EAN/UPC Extension 5, EAN-13, EAN-8 , FIM, GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated, GS1-128, HIBC, Interleaved 2 of 5, JAN-13, JAN-8, MSI, Plessey, POSTNET, UPC- A, UPC-E, UPC-E0 Sensor material: Reflective sensor, Gap sensor Print technology: Thermal Transfer Print speed: 200 mm/s Resolution: 600 dpi Minimum label length: 5.1 mm Minimum liner width: 25.40 mm Maximum label width: 105.66 mm Maximum liner width: 106.68 mm Maximum labels per day: 5000 Maximum print width: 105.66 mm Maximum print length: 508.00 mm Maximum roll outer diameter: 203.20 mm Character styles: Arial, Courier New, Tahoma, Times New Roman, Trechuchet MS, Verdana Dimensions (WxHxD): 241 x 304 x 431 mm Weight: 5.9 kg

ZWIEBEL calibration weight 500g class F1 INOX Laboratory calibration weight in stainless steel Brand (more): ZWIEBEL Weight: 500 g Type / class: F1 maximum permissible error: ± 2.5 mg Weight checked on a precision balance at 0.01 g (10 mg) - see photo In its plastic case uncalibrated weight