Offering the best quotes for your research!
New and used scientific instruments
🚚 We ship to United States 🇺🇸
✉️ info@questpair.com
Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V
Product Description
Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V
Temperature Range
Ambient +20°C to 210°C
Temperature Distribution Accuracy
± 2.0°C (at 210°C)
Chamber Volume
90L
- High precision controller allows high performance temperature control and display of CO2 and power discharge
- Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models
- Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models
- Program operation with a maximum of 99 steps, 99 patterns repeatable
- Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes
- Data acquisition from internal test device possible because of cable holes
- Easy system upgrade with various option settings
Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C.
- 2 x Shelves w/ Brackets
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
Product details
| Circulation method | Forced air circulation |
| External temp. range | 5~35°C |
| Operating temp. range | RT+20°C to 210°C |
| Temp. control accuracy*¹ | ±0.5°C (at 210°C) |
| Temp. distribution accuracy*¹ | ±2.0°C (at 210°C) |
| Temp. gradient*¹ | 6°C (at 210°C) |
| Temp. rise time*¹ | ~60 min. |
| Chamber / Exterior / Insulation | Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool |
| Door | Single swing (left side) |
| Heater / insulating material | 1.1 kW Stainless pipe heater / Glass wool |
| Fan Type | Scirocco fan, Capacitor motor |
| Fan Motor | 10W |
| Cable hole (right side) | 33mm I.D. 1pc. |
| Exhaust port | 33mm I.D. 2pcs. (top) |
| Observation window | Optional |
| Temp. controller | PID Z control by microprocessor |
| Temp. setting method | Digital setting by ▲/▼ key |
| Temp. / Info display | Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution) |
| Timer | 1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation |
| Operation function | Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start) |
| Additional functions | Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information |
| Heater circuit control | Triac zero-cross control |
| Sensor | K-thermocouple double sensor (for temperature control and independent overheat prevention device) |
| Safety device | Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection |
| Earth leakage breaker | Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA |
| Independent overheat prevention | Set temperature range: 0~250°C |
| Internal dimensions*² W×D×H | 450×450×450 mm |
| External dimensions*² W×D×H | 580×646×860 mm |
| Internal capacity | 90L |
| Shelf plate with standard load | ~15kg/pcs. |
| Shelf rest step number / Shelf rest pitch | 11 steps / 30mm |
| Power source 50/60Hz | AC115V 10A (with plug) |
| Weight | ~63kg |
furnaces
A furnace is a heating system that uses a fuel source to heat air or water, which is then circulated throughout a home or building. Furnaces are typically powered by natural gas, propane, oil, or electricity. The most common type of furnace is a forced-air furnace, which uses a blower to circulate warm air through ductwork and into the living space. Other types of furnaces include boilers, which heat water for radiators or baseboard heaters, and heat pumps, which use electricity to move heat from one area to another.
Ovens
Ovens are a type of scientific equipment used to heat materials to a specific temperature. They are used in a variety of scientific applications, such as drying, sterilizing, and curing materials. Ovens are available in a variety of sizes and types, including benchtop, laboratory, and industrial ovens. They are also available in a variety of temperature ranges, from low-temperature ovens for drying and curing materials to high-temperature ovens for sterilizing and melting materials. Ovens are also used in the food industry for baking and roasting.
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments. We're transforming how the scientific community accesses the tools they need for groundbreaking research.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great Customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern University- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
From €4,074.57*ex. VAT
In Stock
Get a quote within 24 hours
Verified Equipment
Safe Payment and Fast Delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Item Stats
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.