Diaphragm vacuum pump KNF N035.1.2AN.18

KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics - Start/Stop through logic control (TTL) - Reset/Prime through logic control (TTL) - Output signal fault alarm The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump is liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual, analog, and RS-232 controls with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXDS15iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS15iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS15iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Edwards nEXT85H ISO63 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum 5x10-9 mbar Inlet Connecti (more)on ISO63 NW16 Pumping Speed Nominal 503.99 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With nEXT85 and nEXT55 Edwards offers a small and compact turbomolecular pump platform ideal for Analytical Instruments as well as for the R&D market. INCLUDED: The Edwards nEXT85H ISO63 NW16 80W Turbomolecular Vacuum Pump includes: - Power Cord - Two Year Manufacturer's Warranty

Capacity (max.): 5.5 l/min Final vacuum (max.): 160 mbar Operating pressure (max.): 2.4 bar Permissi (more)ble medium temperature: 5 – 40 °C Permissible ambient temperature: 5 – 40 °C Weight: 1.9kg

Simple liquid pump with a small reservoir for the circulation of liquids

Single-channel peristaltic pump combines reproducible flow rates with simple operation, either as a  (more)standalone unit, or interfaced with programmable fraction collectors. Flow rate: 0.6 – 500 ml/h Work temperature: 0 – 40°C Maximum backpressure: 2 bar Weight: 1.6 kg

Ohaus Scout STX2201 portable scale, with plate 170x140mm These balances are ideal for laboratory and (more) industrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically New generation of Ohaus portable scales These balances are ideal for laboratory and industrial applications. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

Scientific Industries Rotator Genie w/ Standard Platform Rugged and versatile lab rotator featuring  (more)a platform with retaining bands designed to turn 90 degrees allowing for different mixing motions. Designed to fit in most incubators and cold rooms.Scientific Industries Rotator Genie w/ Standard Platform Specifications Speed (RPM) Speed 5-35 RPM Environmental Installation Category 2, 0° - 38C (32° - 100°F), 95% max. relative humidity Product Weight 11.5 lbs Overall (D x W x H) 400 x 175 x 400mm (15.8 x 7.0 x 15.8 in) Depth with Platform Horizontal - 290mm (11.5 in) Platform Dimension 10 1/4" x 10 1/4" Markings CE

Benchmark Block for 1 x Deep Well Micro Plate The Benchmark Block (for 1 x Deep Well Micro Plate) f (more)or use with the MultiTherm Heating Shaker or MultiTherm Heating and Cooling Shaker is discounted, brand-new, and includes free shipping with a one year warranty. This Benchmark Block is ready for immediate shipment.