Syngene G:Box F3 Chemiluminescence Fluorescence Gel System Lab

Bio-Rad Gel Doc EZ Imager Gel Imaging System This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Includes: -UV Sample Tray-White Sample Tray

Syngene G:Box F3 Chemiluminescence Fluorescence Gel System This item was removed from a university l (more)aboratory where it was surplus to requirements. It powers on and is in reasonable cosmetic condition, with an operational setup capturing images effectively. The original UV transilluminator appears to have been replaced with a GVS20, which is fitted at the bottom of the chamber but not on the usual rails. However, the system functions as intended. Includes:- 1 x Syngene GF3 with upper white light and TLUM mid-wave UV lamp - Synoptics 5.0 MP camera - 1 x HP PC system running Windows 10 with Syngene GeneSys 1.8.11.0 installed

Invitrogen XCell Surelock Mini-Cell Electrophoresis System. Holds gels firmly in place without issue (more)s or leaks with a tensioning wedge structure and no tweezers or grease required. Capacity for two 8*8 cm Novex pre-assembled gels. The Invitrogen XCell SureLock Mini-Cell is a vertical protein minigel electrophoresis system compatible with all Invitrogen precast Novex minigels and Surecast handcast gels. The Mini-Cell is simple, rugged and easy to use. Instead of using clamps, the system incorporates the use of a gel tension wedge to make installation quick and convenient.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

A&D Weighing MS-70 Moisture Analyzer Capacity 71 g Weight Resolution 0.0001g Moisture Content A (more)ccuracy 0.05 % (Over 1 g) 0.01% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MS-70 Moisture Analyzer is a top-tier solution designed for labs requiring the highest level of precision and versatility in moisture analysis. Featuring four selectable heating modes—standard, quick, step, and ramp—the MS-70 offers customizable heating curves to perfectly match the unique requirements of diverse sample types, ensuring accurate and repeatable results every time. With five distinct measurement programs (Standard, Automatic, Quick, Timer, and Manual), users can easily select the ideal method for each process, maximizing efficiency and adaptability. The large, easy-to-read VFD display presents all critical information—moisture change, set values, action status, and data numbers—clearly, facilitating smooth operation. The MS-70’s ergonomic design, complete with safety-oriented handles and a progress-view window, enhances workflow by reducing handling errors and preventing accidental burns. Self-check functions further ensure reliability by continuously monitoring defect and temperature controls. Data management is streamlined with the RS-232C interface and WinCT–Moisture software, making data export, analysis, and GLP/GMP/GCP/ISO-compliant reporting effortless. The memory function stores up to 20 unique measurement conditions and 100 test results, allowing for quick setup recall and reliable documentation. Designed with high-performance halogen heating technology, capable of detecting even slight moisture drops (under 1% with PET samples), the MS-70 promises accuracy, ease, and safety, backed by dependable long-term performance. Backed by a comprehensive 5-year warranty, the MS-70 Moisture Analyzer offers lasting reliability and peace of mind for your lab's moisture analysis needs. INCLUDED: The A&D Weighing MS-70 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - RS-232C Cable - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The DigiGenius is a super performance gel documentation system for users on a budget. This highly ve (more)rsatile system can be used for all imaging from general laboratory pictures. GelVue UV Transilluminator from Syngene GVM30. Wavelength: 302nm. Control from 50 – 100%. Filter surface (DxW): 200 x 200 mm.

Potteau door cabinet L.Grey 600