Quattroflow QF 1200-S Single-use Pump diaphragm pump

Technical features Flow rate 0.5–3.0 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W

MORE DETAILS TO FOLLOW

Gilson Minipuls 3 Pump Head R2 For Peristalic Pump Part#: F117800 This was removed from a universit (more)y lab where it was surplus to requirements. Item is in good used condition with minor surface damage. It comes with the original packaging.

VACUUBRAND ME 2 NT Diaphragm Pump Ultimate Vacuum 70 mbar / 52 torr Maximum Pumping Speed 1.4 CFM a (more)t 60Hz Number of Heads/Stages 1/1 Features - Whisper quiet and very low vibration. - Powerful, even for parallel operation of several applications. - High performance even at low vacuum levels. - Very low vibration. - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. Diaphragm vacuum pumps are an excellent choice for applications with non-corrosive gases and vapors. The materials used in these pumps like aluminum and special plastics are opening a wide range of applications. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. INCLUDED: The VACUUBRAND ME 2 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards XDS35iCE 100/230V 1PH 50/60HZ Dry Scroll Pump Ultimate Vacuum 3 x 10-2 mbar Inlet Connection (more) NW10 Displacement 35 m3h-1 / 21 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards XDS35iCE 100/230V 1PH 50/60HZ Dry Scroll PumpXDS dry scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes.The XDS35i family of scroll pumps offers proven dry, clean vacuum solutions for a wide range of applications, with smart drive technology to look after the pump and provide worldwide performance.Now, a combination of the double start scroll form technology and by-pass valves have enabled Edwards to offer the XDS35i Enhanced range of pumps to complement our original family.INCLUDED: The Edwards XDS35iCE 100/230V 1PH 50/60HZ Dry Scroll Pump includes: - Power Cord - One Year Manufacturer's Warranty

Digital Display, Total Control of Operations AREX Digital PRO is the evolution of our best-seller, t (more)he most advanced tool available to date. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). The SpeedServo ™ system ensures a constant speed even when the viscosity varies (counter-reaction). AREX Digital PRO offers the most advanced technology, being equipped with digital displays to set and monitor both stirring speed and temperature constantly and with absolute precision. Temperature regulation of the liquid being processed with an external probe The AREX Digital PRO package includes the external Pt100 probe, capable of reaching 250°C, with an accuracy of ±1.0°C, providing a ready-to-use system capable of directly thermoregulating the sample being processed. Previous model video: Maximum Temperature Homogeneity The particular CerAlTop™ plate, in aluminum alloy coated with a ceramic layer, ensures a formidable homogeneity of the temperature over the entire surface of the plate itself, up to 370°C and at the same time an excellent resistance to chemical agents and ease of cleaning. Maximum Protection, IP 42 AREX Digital PRO magnetic stirrers guarantee a high level of safety and protection for the user. The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. AREX Digital PRO can be programmed with a maximum safety temperature, for some particular applications that require specific temperatures and in order to prevent unpleasant situations. In addition, the electronic board activates a high temperature warning ('Hot Plate Warning') which remains active even with the instrument off, when the plate temperature is above 50°C. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Low Profile, Attractive Design AREX Digital PRO offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use and make it clear that the digital displays indicating speed and temperature can be read. Greater Versatility with the new MonoAlublock™ and MultiAlublock™ The MultiAlublock™ and the new MonoAlublock™ made of aluminum are ideal for carrying out numerous agitation and heating analyzes, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, you can choose the mix that best suits your needs. Technical features: Pt100 connection: provided. Vertex connection: provided. Counter-reaction: constant speed. Electronic temperature regulation: from room temp. to 370°C. Maximum safety temperature digitally settable: temperature limit can be set between 50 and 370 °C. "Hot Plate Warning"  whenever the top plate temperature is over 50 °C. Sample thermoregulation: ± 0.5 °C by using the Vertex thermoregulator (AREX Digital PRO); ± 1.0 °C by using Pt100. Stirring system: high-power driving magnet type ''PCM'' operated by a mono-phase motor for continuous operation.

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V Operating Temperature Sterilization (more) 105°C to 135°C Operating Temperature Drying 135°C to 150°C Internal Capacity 80L Features - Interactive keypad input allows committing sterilization settings to memory - 7″ interactive touch screen - Suitable for protein modification at the maximum operating temperature of 135°C - Easy settings and operation modes for a multitude of sterilization process - Increased safety and function list including forced cooling and memory functions - Equipped with multiple safety locking mechanism for the lid - Comes with large capacity (11L) heat resistant stainless steel container - Alarm buzzer sounds when high or low pressure error occurs "Large capacity, high performance, fully automatic 80L steam sterilization from start to finish with high pressure steam sterilization and drying steps. Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory 7″ interactive touch screen Suitable for protein modification at the maximum operating temperature of 135°C. Easy settings and operation modes for a multitude of sterilization process. Increased safety and function list including forced cooling and memory functionsEquipped with multiple safety locking mechanism for the lid. Comes with large capacity (11L) heat resistant stainless steel container. Alarm buzzer sounds when high or low pressure error occurs. Sterilizing temp. range 105 to 135°C. Drying temp range 135 to 150°C." INCLUDED: The Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V includes: - 2 pcs. stainless steel mesh basket (⌀344 x D300 mm) - Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 The Eppendorf 6 x 15ml (more) Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 are for use with 90mL rectangular buckets in the Eppendorf A-4-38 Rotor. These adapters feature a capacity for 6 x 15ml round bottom tubes, each with maximum tube dimensions (Diameter x Height) of 17.5mm x 100mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 6 x 15ml Adapters for A-4-38 Rectangular Buckets, Cat. #: 022639366Bottom ShapeRound BottomRotor CompatibilityA-4-38 Swing Bucket Rotors