New Brunswick Scientific Ultra Low Temp -86ºc Lab Freezer U570-86

Cambridge Instruments Stereoscan 360 SEM This system was removed from a university laboratory where  (more)it was surplus to requirements. The microscope is semi-functional. Images can be obtained using the backscatter detector. Some panels have been removed, and the item has been stripped down to parts. We are unable to test this system, due to limitations at our facility. System Includes: - Cambridge SEM Stereoscan chamber - Cambridge Stereoscan 360 console - Cambridge power supply - Edwards 8 two-stage pump - Cambridge Stereoscan 360 manual - Pallet of paneling - Pallet of accessories - Turbo pump - ISS Group i-Scan (powers on) - ACER 19" Monitor (powers on) - Edwards 8 Two Stage Pump, Model: E2M8, SN: 26053 (powers on) - Stereoscan 360 Operator Manual - Stereoscan 360 Circuit Diagram Manual - Video Converter Video to VGA - Leitz Wetzlar Polaroid (No. 543 624) - Rodenstock Rodagon 1:5.6 F-80mm (10830223) - Orange fittings - Pfeiffer Balzers Turbo Pump, Type: TPH 170, SN: PM P01 210 AH2145 Model: Stereoscan 360 Serial No.: 360-13-02

Corepoint Scientific NSWDUF211JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 2 (more)30V Temperature Setpoint Range -50°C to -86°C Capacity 21 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF211JWJ-1 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 230V, is designed for demanding cold storage applications, ensuring the safe storage of samples and reagents. This 21 cu. ft. capacity freezer features high efficiency and low noise operation with two compressors maintaining a 300 BTUh reserve capacity. The interior includes a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. Equipped with a microprocessor controller, the unit offers touch pad keys, a large LED temperature readout, and audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The freezer also has a cam action handle with key lock, door switch for alarms, four heavy-duty swivel casters with locks, and CFC-free refrigerant. Made in the USA, this unit is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF211JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 230V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform GENIE Temp-Shaker 300 with Flask Cla (more)mp Platform provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Flask Clamp Platform Specifications Speed (RPM) 10 – 300 RPM including stir reverse Timer 1 min - 99 hours w/Alarm or Continuous Orbit 35mm Selectable Ramp Rates 10 - 100 rpm/sec Product Weight 21 Kg (46 lbs.) Dimensions (base) 460 x 460mm (18 x 18in) Overall (D x W x H) 590 x 500mm (23 x 20in) Warranty 24 months Markings CE

Ohaus AX125D Adventurer Semi-Micro Analytical Balance, 82 g/120 g, 0.00001 g/0.0001 g Maximum Capaci (more)ty 82 g / 120 g Readability 0.00001 g / 0.0001 g Repeatability (Typical) 0.00002 g / 0.0001 g Features - AutoCal™ ensures precise, consistent calibration with no manual effort - Compact draftshield provides easy access and reduces bench space - 4.3" touchscreen offers intuitive controls and adjustable brightness - USB ports enable seamless data transfer and regulatory compliance - Stainless steel pan ensures long lasting durability across research applications - Power-saving features reduce energy use and operational costs - Real-time clock supports GLP/GMP compliance with accurate timestamps - User management secures data with three customizable access levels The Ohaus AX125D Adventurer Semi-Micro Analytical Balance, 82 g/120 g, 0.00001 g/0.0001 g, delivers precise and reliable performance for a wide range of weighing applications. Featuring AutoCal™ technology, it ensures consistent calibration with minimal effort. Its compact draftshield design optimizes workspace efficiency, while the 4.3" full-color touchscreen provides an intuitive and customizable user experience. Dual USB ports enable easy data transfer and support compliance with regulatory standards. Additional highlights include power-saving features, a real-time clock for GLP/GMP compatibility, and a three-level user management system, making it a versatile and dependable tool for laboratories, educational institutions, and industrial settings.INCLUDED: The Ohaus AX125D Adventurer Semi-Micro Analytical Balance, 82 g/120 g, 0.00001 g/0.0001 g includes: - Wind Ring - Draftshield - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 50 g), plastic box Number of p (more)ieces in the set: 20 Weights 1 g i 2 g &ndash; solid masses without adjusting chamber

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK&reg; The new, taller and larger MONOBLOCK&reg; enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content &ndash; of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160&deg;C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

MAS Y device features an electromagnetic MAS module of high resolution and Y touch panel featuring 5 (more).7&rdquo; display. The device is intended to be integrated into customer&#39;s system. Compact module design plus the in-built electronics allow to adapt the module respectively in accordance with the customer demand. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.1 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The measurements can be carried out using an under-pan weighing solution and a regular weighing pan. By cause of high measurement accuracy, it is recommended to install the module inside customer&#39;s device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2&times;RS232, 2xUSB type A, Ethernet, 4&times;IN, 4&times;OUT, Wi-Fi. The module comes standard with a dedicated power supply.