Cooled Incubator SMART ILW 115 POL-EKO

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  Plexiglass windows door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard! - Inner chamber in aluminum for better heat transport.

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

Jouan SA EB280 Incubator Lab This item was removed from a university where it was surplus to require (more)ment. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Features: - Temperature ambient +5˚C to 60˚C - Capacity 280 litres - 5 shelves 48 x 48cm which are height adjustable Specifications: - Serial No. 30101140 - Cat No. 41443000 - Year 2001

Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V Temperature Range Ambient  (more)+5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 37L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Benchtop, economical general purpose 37L natural convection incubator with observation window. Control panel located at a higher position for easy access. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Unused demo product in original packaging. Great condition. 12 months warranty. Features: - User-fri (more)endly microprocessor control - Temperature setting in 0.1 °C
 steps - PID control with automatic troubleshooting during device preparation, for ensuring correct and accurate control at all times - Easy calibration with push buttons - Large, easily readable vacuum fluorescence display - Flexible racks allow efficient use of the chamber volume and can be easily removed for maintenance - Inner glass door allows observation of the samples without significant influence on the chamber temperature - Automatic overheating alarm - Cable bushing with large diameter (42 mm / 1,65 in) for data monitoring - RS232 port for data recollection - High performance security system mit double sensors for maintaining the required temperature during power outages for sample protection - Stainless steel chamber with rounded corners for easy mainenance - FCKW-free/FKW-free polyurethane foam for exceptional temperature values and condensation protection - Temperated door with intelligent energy management decreases condensation (also at lower temperatures) - Timer with week, day and realtime mode - Optional Programming of different temperature ramps Technische Daten: - Temperature range: 5 °C to 70 °C - Inner dimensions (W x H x D): 544 x 1335 x 524 mm - Outer dimensions (W x H x D): 778 x 1545 x 770 mm - Chamber volume: 381 liters - Number of racks included/max: 2/17 - Spatial temperature deviation at 20 °C: ≤ ± 0,3 °C - Temporal temperature deviation at 20 °C: ≤ ± 0,1 °C - Usable area: 0,56 m2 - Rack dimensions (W x D): 528 x 498 mm - Weight load capacity per rack: 30 kg - Weight load capacity device: 75 kg - Weight: 167 kg

The Frontier™ 5000 Series FC5707-K Kit is a reliable, compact, low-speed multifunction centrifuge id (more)eal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5707-K model you will have the angular rotor with a maximum capacity of 8 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.445 g; maximum speed 6,800 rpm; tube diameter without adapter 18mm / 15ml, 1.5ml; outer/inner radius 86 mm; angle 32°. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN Compact design saves bench space: By packing all of its functionality into a small footprint, the FC5707 saves bench space in the laboratory. STRUCTURE AND FUNCTIONALITY Modern touch-wheel control and elegant waterproof interface: Designed for ease of use, the FC5707 features a convenient control on a waterproof user interface, which allows effective operation, even when gloves are worn. Simple and flexible operation for a wide range of applications: 8 x 15 mL angular rotor accommodates round bottom tubes or conical bottom tubes (only 4 conical bottom), including common blood tubes. Additionally, it can also be easily adapted with accessories to accommodate smaller tubes such as 7.5 and 1.5/2ml. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.800 rpm Maximum relative centrifugal force: 4.445 g Maximum flow rate (rotor): 8 x 15 ml Program memories: 99 Rotor Packaging: Angled Rotor: Rotore Angolare 8 x 15ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 15 ml Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

Christie Digital 1.9-3.8:1 Zoom Long Lens This was removed from a university lab where it was surplu (more)s to requirements. The unit is in good cosmetic condition but has not been tested.

Labconco RapidVap N2 Evaporation System with RS-232 LinkThe RapidVapN2 Evaporation Systems offer a m (more)ore efficient, automatic alternative toKuderna-Danish and rotary evaporators and may be used with a broad range ofaggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gasis directed downward onto the surface of the sample. Nitrogen blow down reducesthe partial pressure directly over the liquid to speed evaporation and helpremove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 orall 8 tube locations. Vortex motion and dry heat may also be applied to furtheraccelerate processing. The block holds eight large samples, up to 450 milliliters each, making itefficient for environmental and residue testing. An accessory block that holdseight 170 milliliter tubes suitable for solid phase extraction is alsoavailable. In many of these applications, the samples should not go to dryness.The unique Cool-Zone block and tube design significantly reduces theevaporation rate after end point is achieved. The Cool-Zone insulates thesamples and allows the researcher adequate time before the samples reachdryness to remove them or to perform solvent exchange procedures. Alarms thatsignal when timed end point has occurred and when the RapidVap senses that theprocess is nearing completion allow for unattended operation.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RETSCH stainless steel test sieve 100x40mm - 224 μm New equipment in its original packaging Referenc (more)e: 60.106.000224 Frame material: Stainless steel Quantity: 1/box For use with (equipment): AS 200 Vibration Stirrer Height (metric): 40 mm External (metric) diameter: 100mm Porosity: 224 μm

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.