Stuart SS150B Analogue Aluminium Hotplate Blue with SCT1 Temperature Probe

Box of 200 Semperguard Xtra Lite nitrile gloves size S 6-7 Size S6-7 Quantity: 200 gloves Powder fre (more)e Category III CE class I - EN 420 - EN 374 - EN 455 For laboratory Length 240mm Thickness 0.14mm Smooth interior Lavender blue color Ambidextrous Type B Food contact approved, protection against pathogens Quantity available: 38 boxes of 200 gloves

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The KNAUER Online Degasser is a 2-channel for semi-preparative flow rates up to 50 ml/min. The degas (more)sing membrane is an innovative Teflon AF fluoropolymer which is more than 200x more gas permeable than regular Teflon and has excellent physical and chemical stability characteristics. Its high efficiency also allows for reduced internal chamber volumes– less than 7.7 ml per channel. For isocratic HPLC applications the 2 chambers of the semi-prep degasser can be connected in series for maximum degassing efficiency. For gradient applications, up to 2 eluents can be degassed simultaneously. For special applications, one degasser can also be used for multiple HPLC systems. The low dead volume makes reconditioning fast and minimizes solvent waste. Extremely low chamber volumes. Broad chemical compatibility is perfect for use in general HPLC applications Zero hysteresis even at higher flow rates No need to replace check valves or other parts even when under continuous operation Prevents air bubble spikes in the chromatogram Minimizes retention time fluctuations Minimizes gradient reproducibility problems Minimizes unwanted formation of chromophores which can disturb UV detection Minimizes unwanted oxidation or reduction which can disturb electrochemical detection Minimizes fluorescence quenching Technical Data: Dimensions: 85 x 165 x 315 mm (W x H x D) Weight: 2.5 kg Power Supply: 85 – 265 V, 47 – 63 Hz, 20 W Max. Flow Rate: up to 50 ml/min Number of Channels: 2 Degassing Method: gas permeation through Teflon AF amorphous fluoropolymer membrane Degassing Efficiency: < 0.5 ppm residual dissolved O2 at 1 ml/min Dead Volume: 7.7 ml Solvent Applicability: universal, except hydrochloric acid and halogenated hydrocarbons especially hexafluoro isopropanol (HFIP) Wetted Materials: PEEK, Tefzel, Teflon AF Vacuum Chamber: polypropylene and stainless steel

This was removed from a university lab where it was surplus to requirements. Inside dimensions - D57 (more) W76.5 H126cm2 Shelves -&nbsp;56 x 75cm The unit powers up and the temperature was set to -86 and dropped as low as -86˚c (thermometer read -80˚c) after running for 5 hours. The item is in reasonable cosmetic condition but it is covered in tape marks and residue, and some of the shelf door hinges are broken.

This was removed from a university lab where it was surplus to requirements. Inside dimensions - D57 (more) W76.5 H126cm2 Shelves -&nbsp;56 x 75cm The unit powers up and the temperature was set to -86 and dropped as low as -86˚c (thermometer read -80˚c) after running for 5 hours. The item is in reasonable cosmetic condition but it is covered in tape marks and residue, and some of the shelf door hinges are broken.

Arctiko SF 150 -60°C Low Temperature Chest Freezer Temperature Setting -30°C / -60°C Volume 4.7 cu.  (more)ft. (133L) Cooling System Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - The user friendly XR30CX controller is standard and includes different alarms such as visual, acoustic, probe failure, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - Features a premade access port, making it easier to monitor or inspect the unit with external probes - 100% HCFC &amp; CFC free The Arctiko SF 150 -60°C Low Temperature Chest Freezer is a compact low temperature chest freezer designed to work in high traffic labs. The single compressor technology ensures a quick pulldown, fast recovery time, and high temperature uniformity throughout the compartment, even with multiple door openings. The single compressor technology is also specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. The technology featured in this unit ensures the best possible storage capacity per square meter of any chest freezer model in the market. The SF 150 has optimized internal storage for the best overlook. With the included stackable basket and the optional stainless steel front rack storage system, samples will be easily accessible at any time. This freezer includes a premade access port, making it easier to monitor or inspect the unit with external probes. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. INCLUDED: The Arctiko SF 150 -60°C Low Temperature Chest Freezer includes: - Key for Door Lock - Stackable Basket - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

MARSHALL Select MS-SP320-1100 Spectrophotometer, 320-1,100nm Wavelength Range 320 to 1,100nm Wavelen (more)gth Accuracy ± 0.5nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Features a large backlit screen providing detailed graphical data presentation - Equipped to store up to 200 test results and standard curves - Simplifies setup with arrow keys for error-free wavelength adjustment - Accommodates a variety of cuvette sizes, supporting path lengths from 5 to 100mm - Designed to withstand the rigorous demands of daily use - Built-in USB port for efficient data exports Introducing the MARSHALL Select MS-SP320-1100 Spectrophotometer, a state-of-the-art instrument designed for precision and adaptability across a broad spectrum of scientific applications including agriculture, geology, metallurgy, and environmental studies. This robust spectrophotometer is equipped with a single-beam optical system and a high-class grating of 1200 lines/mm, ensuring a spectral bandwidth of 4 nm and a comprehensive wavelength range from 320 to 1100 nm. The MS-SP320-1100 sets itself apart with advanced features such as an imported, environmentally-friendly lamp system that minimizes ozone exposure and enhances user safety. It offers automatic functionalities including wavelength calibration, light source switching, and dark current calibration, which streamline operations and reduce potential errors. The optical mirror is coated with SiO2 to diminish interference from external light sources, thereby improving the accuracy and reliability of measurements. The spectrophotometer’s LCD display provides easy navigation and real-time monitoring of lamp life and system stability, ensuring consistent performance. With its superior design and innovative features, the MARSHALL Select MS-SP320-1100 is an indispensable tool for professionals seeking to push the boundaries of research and analysis. INCLUDED: The MARSHALL Select MS-SP320-1100 Spectrophotometer, 320-1,100nm includes: - Tungsten Lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 200 g), plastic box Number of  (more)pieces in the set: 23 Weights 1 g i 2 g &ndash; solid masses without adjusting chamber

IKA KS 130 Control NOL Shaker Type of Movement Orbital Speed Range 0 to 800 RPM Shaking Stroke 4 mm (more) Features - Electronic adjustment of speed and timer - A digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuousoperation (endless) - All functions can be controlled and documented withlabworldsoft® - Special version with reverse rotating direction on request - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included in delivery, please orderseparately The KS 130 control NOL open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 2.0 kg, it can handle a variety of vessel sizes and shapes. The electronic adjustment of speed and timer ensures precise control, and the digital display provides easy readability of speed, timer function, and operating modes. Additionally, all functions can be controlled and documented with labworldsoft®, enhancing its versatility and convenience in any laboratory setting.