Zeiss Standard Fluorescence Microscope w/ 4 x Objectives Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

This Zeiss LSM 510 Meta Confocal High Resolution Microscope System was removed from a university lab (more) as it developed a fault. The university reported: "We have a confocal microscope (Zeiss LSM510 Meta) which we are hoping to sell. It powers up but doesn’t fully work, there must be a loose connection somewhere but I don’t have the time or space to work out where." The units are all generally in reasonable used cosmetic condition. All parts do power up individually but we could not get the system to run either. We believe there should be a PC containing software that we do not have. The system is sold for spares/repairs. The system consists of: 1 x Zeiss Axiovert 200M Microscope (1312-732)Fitted with:1 x Zeiss 1269-455 Dual Illumination Source Motorised Mirror Switch.1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal.2 x Zeiss 1016-758 W-PI 10x /23 eyepieces.1 x HBO 100 Lamp 098.0042.000 (01/03163).1 x HAL 100 Lamp 42 30 00.With EBQ 100 Isolated Lamp PSU. 1 x Zeiss Laser Module 1294-260.Two of the wheels are broken, so they have all been removed and it has been put on a pallet. 1 x Zeiss LSM510 Meta System.Release 3.5 META 1305-593.With Zeiss Remote 1260-157. 1 x Microscope isolation table. Measures: 150cm L x 80cm W x 77cm H. 1 x Zeiss Temperature Control - 37 (0115.000). 1 x Zeiss AIM-SYSTEM Interface box 2436000101.

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope This system was removed from a unive (more)rsity lab where it was surplus to requirements. The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs. Cosmetic and working conditions vary as stated below each item. ADE Phase Shift MicroXAM-100Model: MicroXAM-100 The item is in excellent cosmetic condition and shows no signs of damage.However, when switched on, the item does not power on. The item includes the following components: - Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.- 50AT NA 0.55 885 Objective: This objective is untested. - Phase Shift Technology Rotary Stage 4360: Model: Rotary Stage 4360Serial#: L56332-3021The rotary stage is in good cosmetic condition and shows no signs of damage.However, when switched on, it does not power on. - Javelin Video Monitor: Model: BWM9BXSerial#: 7070083The video monitor is in good cosmetic condition.It powers on with the power light illuminated. - Nikon Transformer and Nikon 50W AD Lamp: Model: UNBoth the transformer and the Nikon lamp are in good condition and fully functional.The light output can be adjusted fully. - AD Phase Shift Controller: Serial#: E71000-500 The phase shift controller is in good cosmetic condition.It powers on with the power light illuminated.Unfortunately, further testing could not be conducted.

Ceti Versus 3400.0000 Inverted Microscope This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. 2 x Eyepieces - WF10x/20 2 x objective lenses: - 1x CETI PL L 25x/0.4 160/1.2 1x CETI Ph+25x/0.40 160/1.5

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

This item has just arrived in our stock. Please enquire for further details.

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

Hybaid Maxi 14 Rotisserie Shaking Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Shaking platform 33 x 33cmInternal dimensions 35 x 32 x 51cmRotisserie 10 x 35mm bottles

This item has just arrived in our stock. Please enquire for further details.

COMBISTORAGE UNDERBENCH Modular and certified. Optimize the space in your laboratory thanks to the C (more)OMBISTORAGE under hoods. Replace your furniture in the laboratory with useful safety cabinets for acids, bases and flammables. Different widths and heights to perfectly fit your laboratory. COMBISTORAGE UNDERBENCH safety cabinets can be combined on bases of different lengths. (It allows to have a single base for composition: ACIDS + BASES + FLAMMABLES).  Possibility of aspiration. - Construction in electro-galvanized steel sheet with thicknesses from 1 to 1.5 mm cold bent - gray - External finish in acid-resistant epoxy resin and passage in a thermal tunnel at 200°C - Panels made of HPL (High Pressure Laminate) with high resistance to chemical and aggressive vapors - Structure that provides for replacements with spare parts - redisposition for ventilation with 100Ø mm flange for external connection or filtration ventilation system - Equipped with grounding - Adjustable feet - Key lock - Shelves made of plasticized steel or stainless steel with adjustable height - Model with chest of drawers made of plasticized steel - Securing the shelves with pegs - Signage with pictograms according to ISO 3864 - EN61010 certification - EN16121 BV certification HOW TO CHOOSE YOUR COMBISTORAGE IN 3 SIMPLE STEPS? 1 - Measure the space you have available in your laboratory: under the hood, instead of a simple piece of furniture, in a space you do not use. 2 - Think about if you will need a particular support base. 3 - Choose the cabinet model for acid chemicals, bases or for flammable products. THE VERSATILITY OF COMBISTORAGE MODELS - Left, right or drawer door - 13 widths available - Support bases at 70 mm - All models available in 620 or 720mm heights DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. CONTACTS US ➞

If you buy a High Resolution Scale PUE 7.1 by July 31, 2024, you will receive each of these products (more) along with a FREE lifetime license for the Workflow Module. High Resolution Scale The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2000 kg, with a repeatability of 3 g guaranteed. 9 advantages, 1 monobloc The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved technology. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2 000 kg, with a repeatability of 3 g guaranteed. For such industries as pharmaceutical, chemical, food and… HRP scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, analog output module, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, PUE 7.1 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of PUE 7.1’s working mods.