Zeiss LSM 510 Meta Confocal High Resolution Microscope - Spares / Repairs Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope This system was removed from a unive (more)rsity lab where it was surplus to requirements. The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs. Cosmetic and working conditions vary as stated below each item. ADE Phase Shift MicroXAM-100Model: MicroXAM-100 The item is in excellent cosmetic condition and shows no signs of damage.However, when switched on, the item does not power on. The item includes the following components: - Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.- 50AT NA 0.55 885 Objective: This objective is untested. - Phase Shift Technology Rotary Stage 4360: Model: Rotary Stage 4360Serial#: L56332-3021The rotary stage is in good cosmetic condition and shows no signs of damage.However, when switched on, it does not power on. - Javelin Video Monitor: Model: BWM9BXSerial#: 7070083The video monitor is in good cosmetic condition.It powers on with the power light illuminated. - Nikon Transformer and Nikon 50W AD Lamp: Model: UNBoth the transformer and the Nikon lamp are in good condition and fully functional.The light output can be adjusted fully. - AD Phase Shift Controller: Serial#: E71000-500 The phase shift controller is in good cosmetic condition.It powers on with the power light illuminated.Unfortunately, further testing could not be conducted.

Leica DMIL Inverted Microscope Type 090-135.001 This was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in working order. The focus knob is quite stiff but the fine adjustment works as intended. It is in good cosmetic condition with minor marks. Includes: -Leica ∞/-/ C PLAN L 10x/0.22 PH 1 (506078)-Leica ∞/0-2 C PLAN L 20x/0.30 PH 1 (506152) 2 x Eyepieces:-Leica 10X/18 (527000)-Leica 10X/18 M (527001)

MOTIC AE21 Inverted Phase Contrast Microscope with 4 Objectives Model: AE21 Series + MOTICAM 2000 ca (more)mera Trinocular Head Adjustable Eyepieces W10x/20 C-Mount Adapter 0.65x 4 Objectives (including 2 for phase contrast X10 and X20): E-Plan 4x/0.10 E-Plan PH 10x/0.25 LWD PH 20x/0.40 LWD 40x/0.60 Transmission illumination. With software and computer With Accessories Equipment tested and verified In good condition Power cord

Ohaus a-AP50MM-B Photometer Fixed Wavelength 365 nm; 420 nm; 455 nm; 525 nm; 560 nm; 570 nm; 630 nm  (more)Photometric Measuring Range 0 Abs to 1 Abs Wavelength Accuracy ±1.0nm Features - The AP50MM is equipped with a real-time dynamic display for eachmeasurement, to provide fast, reliable results - Can record up to 30,000 datapointswith time and date stamp - Built-in calibration curves provide automatic selection of appropriatewavelengths from the long-lasting LED light source, store commonly used tests for efficiency - Large, backlit display makes it easier to read real-time results - Fixed wavelengths: 365 nm, 420 nm, 455 nm, 525 nm, 560 nm, 570 nm, 630 nm - Turbidity optical system based on nephelometric measurement - Photometric accuracy of ± 0.005 Abs at 1.0 Abs nominal - Compact and lightweight design weighing only 1.32 lb (0.6 kg) - Operates on 4 AA (LR6) batteries with a typical life of 6 months The Ohaus a-AP50MM-B Photometer is a standalone, multifunctional device designed for fast and reliable colorimetric and turbidity measurements in field applications. Engineered with a compact, rugged design, this photometer provides exceptional performance with a real-time dynamic display for each measurement, allowing for precise and efficient analysis. Capable of storing up to 30,000 data points with time and date stamps, it ensures seamless data management for professional use. The a-AP50MM-B features built-in calibration curves that automatically select the optimal wavelength from its advanced LED light source, including near-UV at 365 nm, making it highly versatile for various testing requirements. A large, backlit graphical LCD offers clear visibility of results, even in low-light conditions, while the device’s nephelometric turbidity optical system ensures accurate measurements ranging from 0 to 200 NTU. With its lightweight construction at just 1.32 lbs and operation powered by 4 AA batteries lasting up to six months, the a-AP50MM-B is perfect for on-the-go applications. While this model does not include additional accessories like the a-AP50MM-F, it delivers all the essential features for high-quality analysis, making it a reliable choice for water sample testing in diverse environments. INCLUDED: The Ohaus a-AP50MM-B Photometer includes: - >Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Nikon Eclipse 50i trinocular microscope. Ergonomic trinocular head with C-thread camera output. 10x/ (more)22 eyepieces. Removable revolver. CFI Nikon Plan 2x- 10x- 20x- 40x objectives. Nikon 0.9 condenser with flip-up top lens. Microscope with high optical quality and very good ergonomics. For general applications and pathology, due to its 2x objective. The Nikon Eclipse 50i trinocular microscope is a unit with high optical quality and very good ergonomics. For general applications and pathology, due to its 2x objective.

Motic BA210E LED Binocular Compound Microscope w/o 100x Objective Magnification Range 4x to 40x Opti (more)cal System Colour Corrected Infinity (CCIS) Illumination 3W LED Features - Optional intermediate Epi-LED S fluorescence module - Quadruple nosepiece - EC Plan achromatic objectives - Compact rackless stage - Upgradable with phase & pol contrast and simple darkfield - Fixed-Koehler illumination, HAL/LED interchangeability - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) Motic’s BA210E is dedicated to give an answer on basic demands from educational and biomedical laboratory work. The upgraded EC Plan Achromatic objectives in our CCIS© Infinity Concept deliver a fully corrected intermediate image for crisp and clear results within a 20mm Field of View. The rackless stage enables a safe x/y scanning even for the unexperienced user. The complete series of EC Plan Achromatic objectives, from 4X to 100X magnification, is achieving an improved image contrast both for human eye and digital cameras through the photo port. Especially in Phase contrast, the optional objectives (positive & negative Phase) show a remarkable performance for a wide range of applications. The N-WF eyepieces start with the standard 10X/20 mm Field of View and provide a diopter adjustment (+/-5dpt) for both eyes, ready for the use of optional reticles. Motic's BA210E is designed for a demanding daily usage. The rackless stage allows a safe evaluation of samples without prominent gear rack. The standard eyepiece tubes feature a 30° viewing angle for maximum comfort, whereas the interpupillary distance of 55-75mm can easily be adjusted, following individual conditions. The trinocular tube option with a 100:0 / 20:80 light split allows the adaption of digital camera systems and the presentation of microscopic images to a larger public. The BA210E is an integral part of Motic’s BA microscope concept. An upgrade with Phase contrast (positive & negative), Darkfield, Polarization and even LED Fluorescence can easily be performed. The BA210E exceeds the limits of a basic upright microscope, allowing to use contrast methods for specific application fields even in teaching environments with limited resources. INCLUDED: The Motic BA210E LED Binocular Compound Microscope w/o 100x Objective includes: - Binocular head Siedentopf type 30° inclined, 360 ° rotating - Widefield high eyepoint eyepiece N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat Objectives EC PL 4x, 10x, 40x S - Built in low position coaxial rackless stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 3WLED module - 45mm blue filter, immersion oil (5mL), allen hexagonal key, thumb screw, vinyl dust cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Particle Plus Handheld 8303 This item was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and is in good cosmetic condition, we are unable to test it further at our facility. Item includes the following: Power Supply 15V ~2amp 100-240VACCarry caseTripod and plateUSB Cable 6' 

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. Everything powers up and the system is in good cosmetic condition with some marks from use. There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code 'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100) We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well. This error makes it impossible to home the system. So it could not be tested any further. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31840Unit dimensions - W77 L92 H98cm 1 x IBM ThinkCentre PCMT-M 8113-DA1Biomek Software Version 3.3 installed. 1 x Lenovo MonitorType - 9227-AC1 1 x Lenovo Keyboard 1 x IBM Mouse 2 x Nalgene 2 Gallon Waste/Supply Bottles Box of Accessories:-Beckman Coulter AccuFrameBeckman Coulter Vacuum Valve UnitPower AdaptorVarious cables8 x 2ml Tube holders (24 tube slots in each)94 x 2ml tubesVacuum Manifold Base23mm Spacer Collar PN 71975136mm Collar3 x Thermo Scientific 96 well 0.2ml plates.

Yamato WH-201P Auto Pure High Purity Di Type 2 & Type 3 Water Purification System, 120V Flow Rat (more)e 0.5 gpm / 1.9 lpm Resistivity Light 200 KΩ Total Capacity Grains As CaCO₃ 1800 Features - Turn-key system for low cost – on demand service - Resistivity light included for visual indication of cartridge replacement - Available in high purity and high capacity configurations - Available in 2-1/2″ and 4/1/2″ diameter configurations - Outlet isolation valve, spanner wrench and associated tubing provided - Economically produces DI water High Purity DI System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K DI Light). Type 2 and 3 water quality. High purity models: WH201P and WH501P: use low odor mixed bed cartridges for applications requiring better than 10 MΩ water quality. Perfect for general deionization, battery water filling, humidification, hydrogen generator, glassware rinse, glassware washer, sterilizers. INCLUDED: The Yamato WH-201P Auto Pure High Purity Di Type 2 & Type 3 Water Purification System, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Ohaus SHRK07AL2 Rocking Shaker, 2 TierThe OhausSHRK07AL2 Analog Tier 2 Rocking Shaker is an easy and (more) economical option for allof your rocking needs. The Rocking Shaker is ideal for cell culture andblotting applications and is designed to be used in a variety of environmentalconditions. Rocker is supplied with two 14 x 11" (35.6 x 27.9 cm) non-skidrubber mats.The SHRK07AL2is designed for use in a range of lab applications in a variety ofenvironmental conditions. Rocking Shakers provide a seesaw-like motion, whileWaving Shakers offer a smooth, low-foaming, 3D wave motion for precise speedcontrol. All models include a non-slip mat, and most models are available witha stacking tray option.Microprocessorcontrol allows for independent control knobs for tilt, speed and time (analogmodels).Timerdisplays elapsed time or when programmed to a set time, will turn off when timereaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHRK07AL2 Rocking Shaker, 2 Tier includes: - Non-Skid Rubber Mat - Tier Kit - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty