Gilson MyPIPETMAN Select P200, 20-200 uL, Metal Ejector Pipette

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor This was removed from a university lab where it  (more)was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Maximum capacity- 6x1000mlMax RPM- 4200 Includes: X18 Beckman 4x50ml tube slots (345371)X14 Beckman 14x15ml tube slots (339180)X3 1000ml buckets 1066g (368575)X3 1000ml buckets 1067g (368575) Model number- JS-4.2Serial number- 07U2791

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V Ch (more)amber Volume 110L Sterilization Temperature Range 105C to 135C Chamber Dimensions 16.5" x 31.3" (42.0 cm x 79.5 cm) Features - Space-saving design with lid opening upward. - Standard built-in cooling fan for faster post- sterilization cooling. - Dual lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or the temperature exceeds 97°C. - Agar sterilization mode sterilizes agar, and then automatically keeps it warm to prevent it from solidifying. - One-touch lever to easily open and close chamber lid. - Agar melting mode for rapidly melting agar and then automatically maintaining it at liquid temperature, or for a hot and faster start-up. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. - In-process display shows the status and the progress of sterilization cycle. The HVA-85 and HVA-110 models incorporate a 85-liter and a 110-liter chamber, respectively. They are self-contained, portable floor models mounted on caster wheels. Equipped with a chamber 16.5” in diameter, they can accommodate significantly larger loads than 50-liter models. They are ideal for the sterilization of fermenters, media, wastes, and laboratory glassware.INCLUDED: The Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty