Hybaid Maxi 14 Rotisserie Shaking Hybridisation Oven Lab

Laboratory muffle furnace LBX 7L / 1200°C - NEW New Equipment Metal frame painted with epoxy resin I (more)nsulation chamber and interior chamber in ceramic fiber LED screen Temperature range: 100-1200°C Resolution: 1°C Internal dimensions: 300 x 200 x 120 mm External dimensions: 785 x 530 x 640 mm Weight: 50Kg Timer function (1 to 9999 min) manual safety lock on the door Light and sound alarm in case of overheating Automatic shutdown of heat emission by opening the door Disconnection of the oven due to thermocouple breakage. 220-240V / 50-60Hz 3000W

FISHER SCIENTIFIC AU125 universal oven / incubator / 200 °C / 125 Litres Maximum temperature: 200 °C (more) Temperature range: Ambient + 5 ° C -> 200 ° C With forced convection FISHERBRAND Capacity: 125 Litres 2 perforated stainless steel shelves Approximate interior dimensions: 500 x 500 x 470 mm Approximate exterior dimensions: 700x 700 x 800 mm (WxHxD) 1500 W / 220V Tested at 50 ° C / 100 ° C / 150 ° C It must be set to 156 ° C to have 150 ° C. It is therefore necessary to add 4% to the desired value. (for example to have 105°C you have to put 109°C) In terms of linearity and fluctuation, it is very good, the temperature fluctuates by more or less 0.3°C light traces inside and the stainless steel exterior walls

This Buchi Drying Glass Oven  Type - B-585 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and was tested with a digital thermometer (not included). When set to 40˚C he thermometer measured 32˚C.When set to 100˚C  the thermometer measured 80˚C.When set to 200˚C the thermometer measured 173˚C. It was not tested higher for safety reasons. The item is in a reasonable, used cosmetic condition but the glass needs a good clean inside.

Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V Operating Temperature Range 100° (more)C to 1150°C Max. Temperature Reaching Time ~60 min. Internal Capacity 3.75L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 3.75L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN260plus Natural Convection Oven 256L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 256 L (9 cu. ft.) Features - Internal volume of 256 L (9 cu. ft.), ideal for large capacity applications - Working temperature range from +5°C above ambient to +300°C, perfect for various laboratory tasks - Precise temperature control with a resolution of 0.1°C up to 99.9°C, 0.5°C from 100°C, ensuring accuracy - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays for easy monitoring and control - AutoSAFETY feature with integrated over- and undertemperature monitor "ASF" to ensure the safety of sensitive samples - Admixture of pre-heated fresh air via an electronically adjustable air flap for enhanced air circulation - Robust stainless steel interior with reinforced ribbing and integrated large-area heating for durability and hygiene - Maximum chamber loading of 661 lbs. with a maximum per shelf loading of 44 lbs., providing ample support for heavy-duty applications The Memmert UN260plus Natural Convection Oven 256L, 115V is designed to provide precise and consistent heating for a variety of laboratory applications. With a large internal volume of 256 liters (9 cu. ft.), it offers ample space for handling large batches or bulky materials. The oven operates within a temperature range of +5°C above ambient to 300°C, ensuring flexibility for both low and high-temperature tasks. The integrated TwinDISPLAY features a high-definition TFT-color display and a PID-microprocessor controller, allowing for easy adjustments and monitoring of temperature, airflow, and timing parameters. The oven’s two Pt100 sensors work in tandem for mutual monitoring, ensuring continuous temperature accuracy and reliability. Safety and efficiency are paramount in the design of the Memmert UN260plus. The oven is equipped with AutoSAFETY, which includes over- and under-temperature monitoring with the ASF system, providing immediate alerts for any temperature deviations. Fresh air admixture is optimized through an electronically adjustable air flap, ensuring uniform heating. The durable stainless steel interior is easy to clean, corrosion-resistant, and reinforced with large-area heating on four sides, making it perfect for rigorous use in demanding environments. With a maximum chamber loading capacity of 661 lbs. and high-quality construction, this oven is an ideal solution for laboratories requiring robust and reliable thermal performance. INCLUDED: TheMemmert UN260plus Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V Temperature Range Ambient +10°C to 2 (more)60°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 150L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 150L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This item has just arrived in our stock. Please enquire for further details.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse & keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Ohaus i-D33XW150C1X7 AM Defender 3000 Washdown Bench Scale, 300 lb., 0.1 lb. Maximum Capacity 300 lb (more). (150 kg) Readability 0.05 lb. (20 g) Platform Size 25.6 x 19.7 in. (650 x 500 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty