Microplate readers

Accuris MR9620 SmartReader Multimode Microplate Reader w/ PC Software Included Detection Modes Absor (more)bance, Fluorescence, Luminescence Microplate Formats 6, 12, 24, 48, 96, and 384-well Plate Incubation Ambient +4°C to 45°C Features - Intuitive, 10-inch color touch screen - Stand-alone system with optional PC software (FDA CFR Part 11) - Monochromator-based system for UV through visible absorbance - Filter module system for fluorescence assays - Advanced PMT detector for luminescence assays - Optional automatic injection modules for flash luminescence - 2 Year Manufacturer's Warranty

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included Plates Accepted 96-Well  (more)and 384-Well Flat Bottom Plates Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9610 is designed for efficient processing of multiple samples and accepts standard 96 well plates as well as 384 well plates for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5⁰C up to 45⁰C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included includes: - SmartReader PC Software for MR9610 - Operator's Guide - Power Cord - 1 Year Manufacturer's Warranty

Accuris SmartReader 96 Microplate Absorbance Reader with Incubation - PC Software IncludedFeatures - (more) For ELISA Testing - Intuitive, 7 inch color touch screen control panel - Filter based system with wavelength range from 340 to 750nm - Operates as a stand alone system, with USB flash drive drive for data transfer - Absorbance range: 0.0 to 4.000 Abs - 8 channel vertical optical path, with zero dispersion - Integrated, multi-speed plate shaker - Temperature controlled plate incubation Plate absorbance results are easily visible on the reading result screen and conveniently placed in grid format for quicker readability. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm. The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Use the touch screen, or connect a mouse for programming and operation. The menu interface allows the user to choose the wavelength filter, set shaking parameters, enter details of the plate layout, and also choose the details for the reading protocol and data calculations.Model MR9600-T offers precise temperature control for incubation of plates during processing. Temperature can be maintained at 5°C above ambient to 50°C. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons. Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing. A data port can be used for connecting a computer or basic printer.

Accuris SmartReader 96 Microplate Absorbance Reader w/ Software IncludedFeatures - For ELISA Testing (more) - Intuitive, 7 inch color touch screen control panel - Filter based system with wavelength range from 340 to 750nm - Operates as a stand alone system, with USB flash drive drive for data transfer - Absorbance range: 0.0 to 4.000 Abs - 8 channel vertical optical path, with zero dispersion - Integrated, multi-speed plate shaker Plate absorbance results are easily visible on the reading result screen and conveniently placed in grid format for quicker readability. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. The SmartReader 96 comes complete with 4 popular filters: 405, 450, 492, 630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm. The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Use the touch screen, or connect a mouse for programming and operation. The menu interface allows the user to choose the wavelength filter, set shaking parameters, enter details of the plate layout, and also choose the details for the reading protocol and data calculations. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons. Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing. A data port can be used for connecting a computer or basic printer. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required for: “known standard”, “unknown sample”, “blank well”, “QC control well”, “negative control”, “positive control”, or “empty”. The interface allows highlighting and labeling multiple wells to save time. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. Click Here to View Product Video INCLUDED: The Accuris SmartReader 96 Microplate Absorbance Reader includes: - 405, 450, 492 and 630nm filters - PC Software - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Wavelength range excitation: 250 – 850 nm Wavelength range emission: 360 – 850 nm Wavelength bandwid (more)th: 9 nm Dynamic range: 6 decades Sensitivity top read: 3 fmol/well FITC Detector: Photomultiplier tube Read types: endpoint, kinetic, spectrum scan, well scan Wavelength selection: Monochromator tunable in 1-nm increments Light source: Xenon flash lamp Read time: 15 seconds Dimensions (HxWxD): 340 x 420 x 420 mm Excluding software As-is

The Biochrom Expert 96 is a PC- controlled modern design multi-channel microplate reader, for fast p (more)late reading of standard ANSI SBS footprint 96 well, flat, round and v-bottomed plates. The Biochrom Expert 96 has four shaking modes for mixing of solutions and the ability to perform readings at timed intervals ideal for kinetic assays.

Light source: High energy xenon flash lamp Detector: Silicon photodiode Wavelength selection: Single (more) High-Speed Monochromator Wavelength range: 200 – 1000 nm, selectable in 1 nm steps Wavelength accuracy: ≤0.8 nm Wavelength reproducibility: ≤0.5 nm Bandwidth: Fixed, 3.5 nm Measurement range (OD): 0 – 4 OD Measurement time (96-well plate, 1 flash): <14 seconds Measurement time (384-well plate, 1 flash): <30 seconds Fast Scan (200 – 1000 nm, 1 nm steps): <5 seconds OD accuracy (0 – 0.8 OD, 96-well plate): ±0.008 OD OD accuracy (0.8 – 2.5 OD, 96-well plate): <±1.0% OD accuracy (2.5 – 3.0 OD, 96-well plate): <±1.5% OD accuracy (at 260 nm): ≤0.5% OD precision (0 – 1.2 OD, 96-well plate): <±0.006 OD OD precision (1.2 – 3 OD, 96-well plate): ±0.5% OD precision (at 260 nm): ≤0.2% OD linearity (0 – 3 OD, 96-well plate, at 260nm): R-2 > 0.999 OD uniformity (96-well plate, at 1 OD): <3% Sample formats: SBS standard microplates from 1- to 384-wells,NanoQuant low-volume plate Microplate shaking: Linear, orbital and double orbital shaking; variable amplitudes and frequencies Stirring speed regulation: 50 – 1000 rpm Lid lifting system – maximum height of microplate and lid: 24.5 mm Temperature control – heating range: Ambient +4°C up to 42°C Temperature control – uniformity: <0.5°C at 30°C and 37°C at incubation position Dimensions (WxDxH): 494 x 557 x 395 mm Weight: 40 kg Software included

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW