Galileo HS602 Vacuumpump

This Varian SP 0183 Diffusion Pump was removed from a university lab where it was surplus to require (more)ments. The unit has not been tested. It is in reasonable cosmetic condition but has some rusting.

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

This KNF Neuberger Laboport Diaphragm Pump Type - N840.3 FT.18 was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonably good cosmetic condition with some marks from use.

Edwards iQDP80 Dry Vacuum Pump This item was removed from a university where it was surplus to requi (more)rement. It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair. Serial No.: M109880Model: 3XIQDP80Manufacturing Date: 21.11.00 Power supply cable & control module not included.

VACUUBRAND Chemistry Diaphragm Pump MD 1C Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz 0.88  (more) cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and ultra low vibration - Proven long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet high requirements regarding ultimate vacuum. The three-stage construction provides the advantageous combination of high pumping speed and deep ultimate vacuum in a pump with a very small footprint. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The MD 1C with gas ballast valve is optimally prepared for pumping easily condensable vapors (high boiling solvents). Three-stage chemistry diaphragm pumps are an excellent solution for applications involving corrosive gases and vapors at high vacuum requirements. Typical applications are vacuum generation at rotary evaporators, vacuum concentrators and many other laboratory applications. Due to their excellent ultimate vacuum they are the ideal solution for evaporation of high boiling solvents even with gas ballast. The MD 1C pump is the heart of a whole line of reliable chemistry pumping units.INCLUDED: The VACUUBRAND Chemistry Diaphragm Pump MD 1C includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 KT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to sui (more)t most laboratory liquid metering and dosing needs. The UFEM 1.10 KT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: PP head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 KT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eaton Intelligent Power® Software Suite  103004871 Rev 10 This was removed from a university la (more)b where it was surplus to requirements. The disc contains the following software:1x Intelligent Power Manager1x Intelligent Power Protector1x Eaton UPS Companion

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select Multichannel P12x300, 20-300 uL PipetteFeatures - Designed to be ergonomic, (more) safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 300 uL - 3 Year Manufacturer's Warranty

Branson Flow Thru Horn 1/2 in Diameter With Two 1/8 in NPT Ports Flow thru horn. 1/2″ diameter wit (more)h two 1/8″ npt ports, use with Branson SFX250, SFX550, S250A, S450A sonifiers, designed for the pharmaceutical industry, used for mixing, emulsification, dispersion, formation of mists and fogs.INCLUDED: The Branson Flow Thru Horn 1/2 in Diameter With Two 1/8 in NPT Ports includes: - Manufacturer's Warranty