Asecos S90 Fire Safety Cabinet

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CABINET CSB60UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm th (more)ick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

CS 60 A+B (ACID+BASIC) BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in  (more)HD PVC - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (wit (more)hout support frame and filter unit)(LxDxH): 1943 x 844 x 1552 mm Height with support frame: 2297 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight (without support frame and filter unit): 315 kg

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

Scanlaf Mars 1200 Biohazard Safety Cabinet Class 2 This was removed from a university lab where it  (more)was surplus to requirements. The unit is in full working order and in good cosmetic condition with marks from use. There is no stand supplied.

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

12-channel pipette 10-100 µL eppendorf Research plus, variable volume. You can also easily order the (more) corresponding PIPE POINTS . Volume: 10 – 100 µL Adjustable volume Color code: Yellow

This Qiagen QIAsymphony Nucleic Acid Purification System was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and we have run a series of maintenance programs on the unit. They all appeared to work exactly as they should.As far as we can tell, the unit is in full working order.  The lab reported it was fully working prior to removal. We are unsure of exact date of manufacture, but the first part maintenance was done in 2016, so it will be 2015-2016 age. We have all the passwords to access it.It is in very good cosmetic condition with only limited marks from use. Unit dimensions - L126 W84 H183cmInside storage - D66 W64 H54cmAdjustable shelf. List of Consumables:-22 x Packs of Sealed Filter-Tips 200ul B (4 x 32 per pack)1 x Part used packs of Filter-Tips 200ul B (2 x 32)Box of 8 Sealed Packs of Filter-Tips 200ul B (4 x 32 per pack) (box unsealed)3 x Sealed boxes of Sample Prep Cartridges, 8-Well (QTY 336 per box)2 x Unsealed but full box of Sample Prep Cartridges, 8-Well (QTY 336 per box)9 x Unboxed Sample Prep Cartridges, 8-Well (QTY Unknown)4 x Sealed Boxes of Filter-Tips, 1500ul (QTY 1024 per box)5 x Sealed packs of unboxed Filter-Tips, 1500ul (4 x 32 per pack)2 x Part used packs of Filter-Tips, 1500ul (QTY 174 altogether)1 x Sealed Boxed DSP Circulating DNA Kit (ref. 937556)2 x Sealed Boxes of 8-rod Covers (144 per box)1 x unsealed Box of 8-Rod Covers (QTY 132)2 x Unboxed packs of 8-Rod Covers (QTY 24)4 x Bags of Accessory Troughs (3 x 5 Packs, 1 x 3 pack - QTY 18)4 x Sealed boxes of RNA Kit (QTY 192 per box)3 x Boxes of Insert D=13 (QTY Unknown)5 x Boxes of Insert 2.0ml (QTY Unknown)1 x Installation Cartridge kit (Boxed with other various pieces)1 x Boxed O-ring Change Tool Set4 x Blue Tube Racks4 x Bags of 3.5ml Tubes (QTY 100 per bag)1 x Part bag 3.5ml (QTY Unknown)1 x Wasp Bar Code Reader4 x SIC -01 Carrier Tubes Sample TrackTub of mixed spares1 x Grey unknown pieceWaste drawer safety lock partsWaste Bags

Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Si (more)zes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Quick, excellent results using minimal buffer - Passive cooling produces gels with straight lanes and sharp bands - Cast your own or use precast gels from a variety of manufacturers - Transfer up to 4 gels in 45 minutes with only 300 ml buffer using optional SE302 Blot Modules - Designed for use with a wide variety of precast gels The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit is a reliable and compact solution for vertical protein electrophoresis and blotting applications. This sturdy system is designed for optimal performance, delivering quick, high-quality results with minimal buffer use. The SE300 miniVE features passive cooling that produces straight lanes and sharp bands, ensuring consistency and precision in protein analysis. It is compatible with a wide range of precast gels from various manufacturers, providing flexibility for different lab needs. The SE300 miniVE Basic Unit includes essential components such as the lower buffer chamber and gel modules with gaskets, making it ready for immediate use. The unit supports glass plates up to 10 x 10.5 cm or 10 x 8 cm and operates at maximum power settings of 1000 V, 500 mA, and 50 W. With user-friendly assembly and robust construction, the SE300 miniVE Basic Unit is an excellent addition to any lab focused on efficient protein separation and blotting. Please note: Glass plates, T-Spacers, and SE211A combs are not included and can be purchased separately. INCLUDED: The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber (tank) - Gel Modules with Gaskets, 2 assemblies - Safety Lid with High Voltage Leads - Well-Locating Decals, 2 pcs - Wonder Wedge Plate Separation Tool - Gel Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Ohaus 30400131 Thermal Block for 24 x 2.0 mL Tubes The Ohaus 30400131 Thermal Block for 24 x 2.0 mL  (more)Tubes is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 1.39 in. INCLUDED: The Ohaus 30400131 Thermal Block for 24 x 2.0 mL Tubes includes: - Clear Rack and Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty