Clean Air EF/B6 Biological Safety Cabinet

CAS Bio-Class 2 Bio Recirculating Microbiological Safety Cabinet This item was removed from a univer (more)sity where it was surplus to requirement. It is in good cosmetic condition and good working order. (Socket tester not included.)

The biohazard cabinet of Clean Air type EF/A4 is designed for microbiological research with biologic (more)al agents, such as bacteria, viruses and allergens. Thus, this biohazard cabinet is suitable, inter alia, for culturing cells and for transfecting cells under sterile conditions. The Clean Air EF/A4 generates a sterile air flow in the cabinet, keeping the material of the cabinet free from contamination and contamination (product protection). In addition, the downflow provides reasonable protection against cross-contamination of experiments. Furthermore, the intake of air from the laboratory room ensures that an inwardly directed protective air curtain is formed at the front of the cabinet, which serves as a personal protection. Downflow HEPA filter (EN 1822): 12P6 + Exhaust HEPA filter (EN 1822): 4P4 UV wave length: 253 nm Dimensions prefilter: 445 x 1150 mm Interior dimensions (WxDxH): 1200 x 575 x 750 mm Dimensions (WxDxH): 1330 x 835 x 1550 mm Frame height: 750 mm Weight: 200 kg

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Exhaust Filter: 292 mm, 99.995% Efficiency at 0.3 Micron HEPA Filter Seal Type: HEPEX Zero Leak Neop (more)rene Seal, Spring-loaded Lighting: LED and UV Supply Filter: 376mm, 99.995% Efficiency at 0.3 Micron Work Access Opening: 254 mm Height Support Frame: 673 – 825 mm Interior Dimensions (HxWxD): 716 x 1177 x 659 mm Exterior Dimensions (HxWxD): 1495 x 1361 x 781 m Weight: 218 kg

Zoje ZJ-1501PT Computerised Embroidery Machine on Wheeled Stand This item was removed from a univers (more)ity where it was surplus to requirements. The machine is in excellent cosmetic condition and powers on. We are unable to conduct further testing. The previous owner has described this machine as working but has some issues, though they did not elaborate on what the issues are. Included: - 1 x User Manual - 1 x Memory Stick Specifications: - Model: ZJ-1501PT - Serial No.: 6013433 - Year: 2012 - Embroidery Frame Movement: X-axis 480mm, Y-axis 320mm - 15 Needle Head - Embroidery Speed: 1200 S.P.M - Needle System: DB x K5 (60 to 100Nm) - Memory Capacity: Approx. 1,000,000 stitches (up to 200 programs)

Eppendorf 5910 Ri Refrigerated CentrifugeThe Eppendorf 5910 Ri Refrigerated Centrifuge combines high (more) capacity and performance in a compact footprint with an ergonomic design, standing out for its ease of use and versatility. This centrifuge features a large 7-inch VisioNize touch interface with an intuitive user experience providing fast and error-free operation, ensuring efficient and reproducible runs. Additionally, the documentation function and unique user management support your quality control with multiple authorization levels, password protection, and documentation of all runs and user activities. With the unique favorites function, the setting of parameters is now faster than ever. Frequently-used settings for time, temperature, and speed are directly accessible on the home screen, allowing users to create individual runs with just three clicks. With the program function, up to 99 programs each consisting of all run parameters (incl. ramps and radius correction settings) with clearly assigned names and a rotor compatibility check can be saved to avoid operation errors. The advanced temperature management of the Eppendorf 5910 Ri Refrigerated Centrifuge is more than just cooling. It offers the latest technology, such as quick pre-cooling and our patented Dynamic Compressor Control (DCC) technology for precise cooling performance. This centrifuge features an overall temperature range of -11°C to 40°C, along with a maximum speed of up to 14,000 RPM with the fastest available fixed angle rotor. Contemporary safety features such as automatic rotor recognition, rotor lifetime tracking, the new rotor compatibility check, built-in imbalance sensors, and much more ensure peace of mind. Freely programmable reoccurring tasks, such as maintenance reminders or rotor and device cleaning schedules, help to optimize maintenance of your centrifuge, reducing downtime and therefore enhancing the efficiency of the user’s lab. Together with a comprehensive portfolio of fixed-angle and swing-bucket rotors, this centrifuge accommodates a particularly broad spectrum of applications, making it the perfect choice for multiuser labs with diverse requirements. The included rotor reaches a maximum speed of 4,500 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5910 Ri Refrigerated Centrifuge includes: - S-4xUniversal Swing Bucket Rotor and Buckets - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5910 Ri Refrigerated Centrifuge SpecificationsMaximum Speed14,000 RPM (4,500 RPM with included rotor)Maximum RCF22,132 x g (3,849 x g with included rotor)Maximum Capacity4 x 1000mlTemperature Range-11°C to 40°CTimer10 seconds to 99 hours 59 minutes, continuous run (hold), or short-spinAcceleration Rates10Deceleration Rates10Noise Level< 59 dB(A)DisplayVisioNize touch interfaceDimensions (W x D x H)28.3 x 25.9 x 14.5 in. (72 x 68 x 37 cm)Weight240.3 lb. (109 kg.)Electrical Requirements120V, 60Hz, 12AComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(8) { background-color: #fffacd; }

VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting The VACUU·SELECT complete cont (more)roller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting includes: - VACUU·SELECT complete controller for lab scaffold mounting - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW