Thermo Heraeus HERAsafe KS18 1,8m Laminar Flow Sicherheitswerkbank Safety Cabinet

This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet

Envair Bio 2+ Class 2 Microbiological Safety Cabinet This was removed from a laboratory where it was (more) surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx55 Wx106 Hx70cm

COMBISTORAGE 4 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 shelves in stainless steel - Toxic substances: 2 shelves in painted steel - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 Kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 3 plasticized steel shelves (max load 40 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

COMBISTORAGE CS360 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

Exhaust Filter: 99.995% Efficiency at 0.3 Micron HEPA Filter Seal Type: HEPEX Zero Leak Neoprene Sea (more)l, Spring-loaded Lighting: Halogen Supply Filter: 99.995% Efficiency at 0.3 Micron Work Access Opening: 254 mm Height Support Frame: 673 – 826 mm Interior Dimensions (HxWxD): 724 x 1178 x 597 mm Exterior Dimensions (HxWxD): 1524 x 1362 x 841 m Weight: 227 kg

DW Scientific MACS VA500 Microaerophilic Workstation Lab This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in reasonable cosmetic condition, with marks from use.

Julabo DYNEO DD-1000F Refrigerated Circulator, 115V/60Hz Working Temperature Range -50°C to 200°C C (more)ooling Capacity 1000W at 20°C Refrigerant R449A Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe The DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -20°C to -50°C with an upper temperature limit of 200°C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options including RS232 port or an analog module interface for voltage or current control. PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-1000F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Ultra-Low Cold Trap, -85 C Brushed, Stainless Steel and Powder-Coated Steel E (more)xterior Illuminated Temperature Graph with Endpoint Indication (Operating temperature of -40C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -84C in less than 40 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel Drain Port (with corrosion-resistant, nylon valve) INCLUDED: The Labconco 7460020 CentriVap Ultra-Low Cold Trap, -85 C, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus EX10201N Explorer Precision Balance Introducing the OHAUS EX10201N Explorer Precision Balance  (more)- a cutting-edge instrument that brings new levels of precision to your laboratory work. As a part of the OHAUS Explorer Series, this high-performance balance features an exceptional combination of modern design and innovative features, offering unmatched functionality to simplify even the most complex measurements.The EX10201N Explorer Balance stands out with its large color touchscreen, serving as an interactive gateway to its advanced application modes. Its icon-driven application software comes with user-friendly features such as user manager, library, and minimum weight indication. These intelligent features convert the balance into an invaluable assistant in your laboratory operations.In terms of performance, the EX10201N Explorer Balance boasts fast stabilization times, optimized linearity, and repeatability specifications. It offers enhanced vibration filtering for stability and accuracy in all conditions. Plus, users have the choice between traditional calibration models or the convenience of AutoCal™ models, which automatically calibrate the balance for optimum accuracy.The robust modular design of the Explorer is another distinct attribute. With a resilient metal housing, the EX10201N guarantees long-lasting durability even under rigorous use. Moreover, the display module can be detached from the weighing base, allowing it to be tower- or wall-mounted. This design flexibility ensures easy viewing in any workspace, enhancing your weighing experience and efficiency.Step into the future of laboratory measurements with the OHAUS EX10201N Explorer Precision Balance. This high-performance balance delivers unmatched functionality, setting a new standard for precision, reliability, and user-friendly operation.INCLUDED: The Ohaus EX10201N Explorer Precision Balance includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

5 Level Shelf Ht 1750mm x P400mm CODIGEL Shelving Lot composed of: An in-line shelf: 3x1199mm on 5 l (more)evels - L = 3537mm (CODIGEL reference: EA-0163) + A corner shelf: 1x1058mm on 4 levels - L = 1058mm (CODIGEL reference: EA-0276) Very solid, durable and hygienic shelving with 15 micron anodized aluminum structure and high density polypropylene shelves They withstand temperatures from -30°C to +75°C, as well as distributed loads of 100kg/m or 120kg per shelf Adjustable feet New equipment in its original packaging