Laboratory incubator Smart CLN 180 POL-EKO

Sanyo MIR-153 Cooling Laboratory Incubator Lab This item was removed from a university lab where it  (more)was surplus to requirements. It is in reasonably poor cosmetic condition with noticeable damage. Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable. It was tested with a temperature and CO2 sensor (not included). Internal dimensions are: L44cm x W49cm x H60cm.

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and has been extensively tested. It is in full working order. It is in good cosmetic condition with minor marks. This is the non-refrigerated model of this incubator.

Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V is a high-capacity, energy-efficient incubator designed for precision temperature control in demanding laboratory environments. With a spacious 384-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it offers flexibility for a wide range of incubation applications. The Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. Enhanced control is provided by the ControlCOCKPIT with TwinDISPLAY, which includes a multifunctional PID-microprocessor controller with dual high-definition TFT-color displays. For precise timing, the SetpointWAIT function ensures that the process only begins once the set temperature is achieved. This incubator prioritizes safety and durability with an AutoSAFETY system, which includes over- and undertemperature monitors and visual and acoustic alarms. Constructed with a stainless steel interior and a textured stainless steel exterior, it is resistant to corrosion and easy to clean. Supporting up to 14 shelves and a maximum chamber load of 440 lbs, the IPP410ecoplus provides ample space for various sample sizes and types. Additional features, such as three freely selectable calibration points, an autodiagnostic system, and AtmoCONTROL software for advanced programmability, make it an indispensable tool for labs focused on efficiency, reliability, and sustainability. INCLUDED: The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF30plus Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 32 L (1.1 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF30plus Forced Circulation Incubator 32L, 115V is a reliable solution for precise temperature control in laboratory environments. With a setting temperature range from +20°C to +80°C and an impressive accuracy of 0.1°C, this incubator ensures consistent and uniform heating for sensitive applications. Its 32L (1.1 cu.ft.) capacity, combined with a reinforced stainless steel interior, provides ample space for diverse sample types while maintaining easy-to-clean surfaces. The advanced ControlCOCKPIT twin display system offers an intuitive interface with dual high-definition TFT-color interfaces, enabling seamless control over critical parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures optimal airflow and uniform heating. Safety is at the core of the Memmert IF30plus design, featuring AutoSAFETY systems with integrated over- and undertemperature monitors to protect samples and equipment. The incubator is equipped with dual Pt100 sensors for mutual temperature monitoring and performance assurance, while the adjustable overtemperature monitor and mechanical temperature limiter (TB) comply with DIN 12880 standards. Additional features include a sterilization program for the chamber, function SetpointWAIT to ensure the process only begins once the target temperature is reached, and built-in audible and visual alarms to enhance operational safety. The durable stainless steel construction ensures long-term reliability, making this incubator ideal for a wide range of lab applications. INCLUDED: The Memmert IF30plus Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The first hot plate stirrer with embedded Wi-Fi technology Wherever you are, VELP Ermes allows the r (more)eduction of routine operations thanks to the real-time control of your AREX-6 Connect PRO. Access your analyzes from PC, Pad or smartphone, to maximize the productivity and reproducibility of your reactions. Immediate notifications and alerts will allow you to always be informed and thanks to the remote interruption you will have total control of your processes. SAFETY FIRST AREX-6 Digital PRO is equipped with 2 independent temperature reading circuits that protect the instrument in the event of a malfunction of one of the two. If the probe is not inserted into the sample being analyzed, the instrument stops heating, showing a safety message on the display. AREX-6 Digital PRO is equipped with the most advanced technology and allows you to set the maximum temperature limit required for analyzes with specific temperatures. The Lock function prevents inadvertent changes to settings by locking the instrument. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. CUTTING-EDGE THERMOREGULATION AREX-6 Digital PRO offers the best thermoregulation available. The PID thermoregulation system guarantees stable, fast temperature control with minimal overshoot. VTF and Pt100 probe allow accurate and precise temperature control. It is possible to choose between 2 different thermoregulation modes: - FAST: The set temperature is reached quickly. - FINE: The set temperature is reached slowly, minimizing overshoot. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX-6 Digital PRO is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX-6 Digital PRO is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical characteristics - Speed ​​regulation precision: 5 rpm. - Temperature regulation resolution: 1°C. - Connection for digital thermoregulators: VTF / VTF EVO. - Probe connection: Pt100. - Sample thermoregulation: ±0.5°C (VTF / VTF EVO) ±1°C (PT100). - Automatic reverse rotation: yes. - Probe detector: yes. - Lock function: yes. - Hot surface warning: on display. - Heating activation button: yes. NEW INTERFACE - EASY USE Bright LED display and intuitive icons. The icons will show you: probe or thermoregulator connection, heating activation, reaching the set temperature, timer activation and rotation reversal. The speed and temperature are set by the sensitive knobs, and are activated only after they are pressed. AREX-6 Digital PRO is equipped with an advanced menu that allows you to configure the instrument with the features that best suit the needs of the individual laboratory. INTEGRATED TIMER AND ROTATION REVERSE The central button allows you to set the timer from 1min to 99h59min. You can set the timer in 2 different modes: - Snap: The timer starts counting down as soon as a function is activated (stirring or heating). - SetP: The timer starts counting down as soon as the set temperature is reached. Furthermore, it is possible to set the rotation reversal at time intervals. 1 - Aluminum alloy plate with ceramic coating 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Heating ON led C - Temperature set point led D - Timer led E - Wi-Fi led F - Autoreverse led G - Timer/autoreverse/lock button The Aluminum alloy heating plate with ceramic coating (1) ensures: • Optimum heat distribution and a high specific power thanks to the circular configuration • Temperature homogeneity • High resistance to thermal stress and thermal shock • High resistance to chemical agents and surface abrasion Magnetic stirring is generated by an AlNiCo magnet, driven by brushless motor which offers a virtually unlimited duration. Size and shape of the magnetic stir bar determines the stirring efficiency at any given speed. CONNECTION TO THE ERMES CLOUD via WIFI Watch the videos to understand all the great possibilities of a latest generation laboratory, connected to Velp's Ermes cloud. VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREX-6 Connect PRO has built-in Wi-Fi technology to connect to the VELP Ermes cloud platform, the perfect solution for your Smart Lab. VELP Ermes allows the reduction of daily manual activities and repetitive operations thanks to real-time monitoring and control of your AREX-6 Connect PRO. Simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analysis data and share reports with your colleagues; receive immediate notifications of events and alarms remotely; record data and insights to improve productivity and reproducibility. Connecting your AREX-6 Connect PRO will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of support from VELP authorized service centers. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA R 1352 Centrifugal Stirrer Two-bladed, blades open with increasing speed. For stirring in round (more) vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.Stirrer Ø: 60 / 15 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1352 Centrifugal Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote