Varian StarCell Ion Pump & Power Unit 929-0172 Controller Lab HVAC UHV

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Agilent Technologies 1200 Series HPLC G1312B Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

VACUUBRAND PC 520 Select Chemistry Pumping Unit Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Powerful vacuum pump with excellent chemical and condensate compatibility - PC 520 select allow simultaneous operation of two independent applications with electronic vacuum control This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump. Based on our popular MZ 2C NT two-stage chemistry diaphragm pump, the PC 520 select is frequently used for medium-sized vacuum applications involving common solvents. Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. With an intuitive, application-based interface, the VACUU·SELECT controller offers predefined vacuum processes for all common laboratory applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to two point control to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 520 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND PC 511 Select Chemistry Pumping Unit Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Powerful vacuum pump with excellent chemical and condensate compatibility - PC 511 select allows simultaneous operation of two independent vacuum applications The PC 511 select is an economical, compact solution for simultaneously running two independent vacuum applications with a single pump. Our popular MZ 2C NT two stage chemistry diaphragm pump is the heart of these pumping units, frequently used for medium-sized vacuum applications involving common solvents. With an intuitive, application-based interface, the VACUU·SELECT controller offers predefined vacuum processes for all common laboratory applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the electronically controlled port detects the boiling pressure and switches to two point control to hold pressure steady when a boiling point is detected. A second, manually controlled vacuum port permits simultaneous operation of a second vacuum application on the same pump. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 511 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036150400 Single-Channel Pump Head SP Quick, 2.5mm Features: - Fast and convenient tube cha (more)nges - Low pulsation due to 5 roller system - Pump head features ball bearings - Rollers made of stainless steel - For tubes with a 2.5-mm wall thickness (wt) - Depending on drive and tubing, flow rate ranges from 0.38 to 3,436 ml per minute Click Here to View Product Video INCLUDED: The Heidolph 036150400 Single-Channel Pump Head SP Quick, 2.5mm includes: - 3 Year Manufacturer's Warranty

Temperature range: Ambient + 5°C to 70°C Temperature accuracy: 0.1°C Capacity: 108 L Dimensions (WxH (more)xD): 710 x 760 x 550 mm Internal dimensions (WxHxD): 560 x 480 x 400 mm Weight: 50 kg

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2   This was removed  (more)from a university lab where it was surplus to requirements. At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed. It is in excellent cosmetic condition with hardly any marks from use. There are various accessories included.

Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor Maximum Speed 14,000 RPM (more) (4,500 RPM with included rotor) Maximum Capacity 4 x 1000ml Temperature Range -11°C to 40°C Features - Ergonomic soft-touch lid closure system for ease of use - Low noise operation enhances workplace environment - Intuitive interface with large display and five program keys for routine access - Dynamic Compressor Control for precise and stable temperature management - FastTemp Pro for automated, energy-efficient pre-cooling - Automatic rotor recognition and imbalance detection ensure operational safety - Motor-driven lid locks and dual gas springs support secure and effortless lid handling - Features 99 programmable slots and variable acceleration and braking ramps for customized use The Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor is designed for high-performance and convenience in laboratory environments. This model achieves a maximum speed of 14,000 RPM and can accommodate up to 4 x 1000ml, with a temperature range of -11°C to 40°C, ensuring versatility for various applications. The centrifuge features Eppendorf's soft-touch lid closure system, which eliminates the need for excessive force when closing the lid, coupled with a low access height for easy loading and unloading. It operates quietly, maintaining a low noise level to enhance your work environment. The interface is user-friendly, featuring a large display, intuitive controls, and five program keys for quick access to routine operations. Advanced temperature management is achieved through Dynamic Compressor Control (DCC), which enables precise cooling and stability. Additionally, the FastTemp pro® option automates pre-cooling to save energy and time. Safety features include automatic rotor recognition, imbalance detection, and motor-driven lid locks. The centrifuge also offers 99 customizable program slots and 10 different acceleration and braking ramps, all geared to streamline and secure laboratory workflows. INCLUDED: The Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor includes: - S-4xUniversal Swing Bucket Rotor and Buckets - Set of 15ml Conical Adapters (2 Total) - Set of 50ml Conical Adapters (2 Total) - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor SpecificationsMaximum Speed14,000 RPM (4,500 RPM with included rotor)Minimum Speed10 RPMMaximum RCF22,132 x g (4,347 x g with included rotor)Maximum Capacity4 x 1000mlTemperature Range-11°C to 40°CTimer10 seconds to 99:59 hours, or continuousAcceleration Rates10Deceleration Rates10Program Storage99 with 5 program keysNoise Level< 53 dB(A)Maximum Kinetic Energy36,400 JDimensions (W x D x H)28.1 x 26 x 36.8 in. (71.5 x 66 x 36.8 cm)Weight240.3 lb. (109 kg)Electrical Requirements120V, 50/60Hz, 12A, 1440WDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

M1 Mass Standard - knob weights. Nominal value - 1 kg.