VACUUBRAND PC 511 Select Chemistry Pumping Unit

Technical features Flow rate 0.5–3.0 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Watson Harlow Peristaltic Pump Skalar SP125 Without cable

VACUUBRAND MV 2 VARIO Select Diaphragm Pump Ultimate Vacuum 0.3 mbar (0.2 Torr) Maximum Pumping Spe (more)ed 1.9 CFM at 60Hz Number of Heads/Stages 4/4 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Contamination-free pumping and evacuation - Excellent ultimate vacuum, and even better ultimate vacuum with VARIO version in TURBO-MODE for use as backing pump for turbo pumps Four-stage diaphragm pumps - like the MV 2 VARIO select - are an excellent solution for continuous, oil-free pumping of non-corrosive gases at fractional millibar vacuum levels. Wetted parts are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range of non-corrosive applications. The MV 2 VARIO select continuously adapts its motor speed to hold the desired vacuum level. That means the pump is whisper-quiet and generates ultra-low vibrations, and has high leak tightness. The highly flexible fabric-reinforced double FKM diaphragm is ideal for extended operating life. The VARIO design includes the variable speed pump and the VACUU-SELECT vacuum controller with an external gauge head. The demand-responsive motor speed control on VARIO models further extends the already long lifetimes of diaphragms and valves. Four-stage diaphragm pumps are an excellent choice for continuous, contamination-free evacuation and pumping of non-aggressive gases under the very high vacuum demands of applications in physics and analytics. They generate a clean vacuum as they are designed without any sliding seals. Hence abrasion or dust are excluded that might creep back into the application. Due to the outstanding ultimate vacuum these pumps are often used as an alternative to rotary vane pumps. A typical application is the use as backing pump for turbomolecular drag pumps. Additionally, the VARIO version provides vacuum control by precise adjustment of the diaphragm pump's motor speed. Depending on the application the demand-responsive motor speed control results in unsurpassed lifetimes of service parts like diaphragms as well as optimal performance for backing of turbo pumps. INCLUDED: The VACUUBRAND MV 2 VARIO Select Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer MVP 020-3 Diaphragm Pump Final Pressure 2 hPa / 1.5 Torr / 2 mbar Maximum Pumping Speed 1. (more)4 m 3/h / 0.82404 cfm / 23.3338 l/min Number of Heads/Stages 2/3 Features - Diaphragm pump with a pumping speed of up to 1.4 m3/h - No hydrocarbons: Completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 020-3 Diaphragm Pump represents the pinnacle of performance in vacuum technology, offering a robust solution for demanding laboratory environments. With a pumping speed that reaches up to 1.4 m³/h and compatibility with all global voltage standards, this diaphragm pump ensures a seamless and powerful operation across a variety of applications. The MVP 020-3 is completely dry and oil-free, eliminating contamination risks and reducing maintenance requirements. This pump is designed with user convenience in mind, featuring a compact and low-vibration operation that produces only 48 dB(A) of noise, making it one of the quietest in its class. It's engineered for reliability with short maintenance intervals and long maintenance times, significantly lowering operating costs. Additionally, the MVP 020-3 comes with an integral leak rate of 1 Pa m³/s, and it can handle intake and exhaust pressures up to 1,100 hPa. Certified according to UL/CSA 61010-1 standards and equipped with a gas ballast as an optional accessory, this pump is suited for a wide range of applications, from basic laboratory tasks to complex industrial processes. INCLUDED: The Pfeiffer MVP 020-3 Diaphragm Pump includes: - Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Rotavac Vario Tec, 115VFor Hei-VAP Expert Control / Hei-VAP Ultimate Control. Recommended f (more)or solvents with low or medium boiling points. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducingprocess time by 30% - Solvent recovery of up to 99% - Once the required vacuum is reached, thepump automatically stops and reliably keepsthe vacuum at the desired level - Minimized runtime saves energy andsignificantly increases the lifespan of thediaphragm - These pumps guarantee minimum noise andvibrations during operation - Rpm-regulated pumps achieve the mostprecise vacuum INCLUDED: The Heidolph Rotavac Vario Tec, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Hermle Z496-1000-AC - 4 x 1000ml Swing-out Rotor without Buckets for Z496-K The Hermle Z496-1000-AC  (more)is a 4 x 1000ml swing-out rotor designed for use with the Hermle Z496 series of centrifuges. With a maximum speed of 4,600 RPM and a maximum RCF of 5,203 x g, this rotor is capable of effectively separating samples in a range of applications. The rotor has a large maximum capacity of 4 x 1000ml, making it ideal for processing multiple samples simultaneously. It should be noted that this rotor does not come with buckets, so they must be purchased separately. Overall, the Hermle Z496-1000-AC rotor is a reliable and efficient tool for high-capacity centrifugation in a variety of laboratory settings. INCLUDED: The Hermle Z496-1000-AC - 4 x 1000ml Swing-out Rotor without Buckets for Z496-K includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 50ml Round Insert (2pk) The Hermle 50ml Inserts are for use with the 6 x 85ml Rotor for the Z (more)326 and Z326 K centrifuges. INCLUDED: The Hermle 50ml Round Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson Pipetman L P10 mL 1 - 10 mL Pipette Designed for performance and comfort, PIPETMAN® L comesin (more) a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P10 mL 1 - 10 mL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P10 mL 1 - 10 mL Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range1 - 10 mLPipette ModelP10LPipette RangePIPETMAN LNumber of Channels1Ejector TypePlasticPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(9) { background-color: #fffacd; }Request a Formal Quote

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves 2 Gilson 306 pump Gilson (more) 322 pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW