Heidolph 036150400 Single-Channel Pump Head SP Quick, 2.5mm

KNF IP65 UFEM 1.10 TT.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. The KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump is brand new in box . Includes a 1 Year Full Parts and Labor Warranty. KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump SpecificationsWeight2 lbs., 0.9kgConnection Tubing ID1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°CPermissible Liquid Media Temp Range5 - 80°CPump HeadPVDFDiaphragmPTFE coveredValvesFFKMDimensions (L x W x H)5.9 x 5.7 x 3.7in (150 x 144 x 93mm)Maximum Suction9.8 ft of waterMaximum Pressure85 psig, 6 barPower Consumption24WLiquid Flow Rate1-100 ml/minLiquid Dosing Volume1-999 mlFunctionsManual Operation (S Version)Electrical100 – 240VComparison of ModelsSpecificationKNF IP65 UFEM 1.10 FT.18RCP2KNF IP65 UFEM 1.10 FT.18S2KNF IP65 UFEM 1.10 KT.18RCP2KNF IP65 UFEM 1.10 KT.18S2KNF IP65 UFEM 1.10 ST.18RCP2KNF IP65 UFEM 1.10 ST.18S2KNF IP65 UFEM 1.10 TT.18RCP2KNF IP65 UFEM 1.10 TT.18S2Connection Tubing¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4 mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°CPermissible Liquid Media Temp Range5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°CPump HeadPTFEPTFEPPPTFEStainless SteelStainless SteelPVDFPVDFValvesFFKMFFKMFFKMFFKMFFKMFFKMFFKMFFKMLiquid Flow Rate1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/minLiquid Dosing Volume1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 mlFunctionsN/AN/AN/AManual Operation (S Version)N/AManual Operation (S Version)N/AManual Operation (S Version).comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel The Gilson MINIPULS 3 Peristaltic Pump Hea (more)d, R8 Eight Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS46i Dry Scroll Pump Ultimate Vacuum 5 x 10-2 mbar Inlet Connection NW40 Displacement 60 m (more) 3h-1 / 35 ft3min-1 Features - XDS scroll pumps provide dry, clean vacuum solutions, setting the standard for robust and efficient performance - Isolates the vacuum environment from all forms of lubricant, ensuring a hermetically sealed operation that prevents contamination - Offers a displacement of 60 m³/h and a peak pumping speed of 40 m³/h, ensuring high performance in demanding environments - Capable of handling maximum continuous inlet pressure of 40 mbar (30 Torr) and maximum continuous outlet pressure of 0.2 bar gauge - With a weight of 48 kg (105 lbs) and a noise level of 55.4 dB(A), it operates quietly and efficiently within a temperature range of 10 to 40 °C - Ensures reliability with a leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ - Equipped with NW40 inlet flange and NW25 exhaust flange for easy integration into various systems XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. The C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. The C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port.INCLUDED: The Edwards XDS46i Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nXDS6iC Dry Scroll Pump Features - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS6iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS6iC Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nEXT400D - ISO160 160W Turbomolecular Pump Ultimate Vacuum 1x10-8 mbar Inlet Connection DN16 (more)0ISO-K Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - ISO160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

suitable for 15 & 24 tubing

Scilogex MicroPette Pipettor, 0.5-10µl The Scilogex MicroPette Pipettor, 0.5-10µl has a volume rang  (more)of 0.1-2.5µl with an accuracy of 2.50/3.00/12.00±%. INCLUDED: The Scilogex MicroPette Pipettor, 0.5-10µl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic BA210S Binocular Microscope with LED Illumination This version of the Motic BA210S is a biolog (more)ical compound microscope with a binocular head and ASC PL 4x, 10x, 40x S, and 100X S-Oil objectives designed for advanced biology students, teachers, doctors, and lab technicians. Every aspect of these microscopes contributes to making your daily work easier. The ergonomic shape of the stand and the comfortability of the different heads enables fatigue-free viewing for many hours.The BA210S is designed for both educational and teaching environments from basic life sciences to medical applications. Contrast methods like Phase Contrast, Polarization and Dark field are easily performed by using optional accessories.INCLUDED: The Motic BA210S Binocular Microscope with LED Illumination includes: - 10x Eye Piece - Objectives: ASC PL 4X, 10X, 40X S, 100X S-Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Maximum Capacity: 10 kg Readability: 1 g Platform Size: 305 x 305 mm Dimensions (LxHxW): 305 x 95 x  (more)305 mm Net Weight: 12.2 kg Platform Construction: Stainless Steel