Thermo Scientific HERACELL 150i GP Co2 incubator / oven

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

Memmert UN 55 PA Incubator This item was removed from a university laboratory where it was surplus t (more)o requirements. The incubator powers on and is in fair cosmetic condition, with a small amount of residual wax remaining after cleaning. Temperature testing was conducted (thermometer not included). C22 Style Kettle Lead Included. Specifications:- Model: UN 55 PA - Serial No.: B215.1207

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it  (more)was surplus to requirements. The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer. It is in reasonable cosmetic condition but has some dents.

Memmert VO29 Vacuum Oven 29L, 230V Temperature Range Ambient +5°C to 200°C Vacuum Range 5 to 1100 m (more)bar Chamber Volume 29L (1.0 cu. ft.) Features - Direct contact between load and heatable thermoshelves ensures rapid and uniform temperature control - Digital pressure control for rapid, gentle drying, optimizing process safety for delicate materials - Optional speed-controlled vacuum pump available, enhancing energy efficiency by approximately 70% - Multi-level heating and sensing system with individually placeable, calibratable thermoshelves for precise temperature adjustments - VDE-tested anti-splinter door construction enhances safety across all operational models - Constructed from high-quality, rust-resistant stainless steel for durability and ease of cleaning - User-friendly operation with intuitive AtmoCONTROL software programming - Integrated data logger and multiple interface options for comprehensive documentation and control - Energy-saving features and chemical-resistant components extend service life and reduce operational costs The Memmert VO29 Vacuum Oven 29L, 230V stands as a pinnacle of efficiency and precision in the field of vacuum drying. Designed for diverse applications such as drying food, cosmetics, electronic components, and more, this oven guarantees rapid and uniform temperature control through its direct contact between the load and heatable, removable thermoshelves, ensuring no heat loss. This model features digital pressure control that facilitates rapid yet gentle drying, optimizing the process for delicate materials. The VO29 is engineered with a multi-level heating and sensing system, which includes individually placeable thermoshelves equipped with separate sensors for accurate temperature control and short process times. This system reacts dynamically to different loads or humidity levels, maintaining a constant set temperature crucial for effective vacuum drying. Additionally, each thermoshelf can be individually calibrated to meet specific testing requirements. While the VO29 oven itself is robust and reliable, it is worth noting that the speed-controlled vacuum pump, which enhances the system's energy efficiency by approximately 70%, is available as an optional accessory and is not included as standard. This pump is designed to be chemical-resistant and operates with a low final vacuum of up to 2 mbar, significantly extending the service life of membranes and reducing operational costs. Constructed from high-quality, rust-resistant stainless steel that is easy to clean, the VO29 offers a user-friendly and intuitive operating experience. It is fully programmable via the AtmoCONTROL software, comes with an integrated data logger, and multiple interface options for comprehensive programming and documentation. This makes the Memmert VO29 Vacuum Oven a versatile and essential tool for any lab needing precise and efficient vacuum drying capabilities. INCLUDED: The Memmert VO29 Vacuum Oven 29L, 230V includes: - 1 x Thermoshelf - 2 x Locking Hooks for Thermoshelf - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA Oven 125 Basic Drying Oven w/ Glass Door Heat Output 1500 W Working Temperature room temp. +5  (more)- 250 °C Operating Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit - Glass Door Universal oven for tempering, drying, aging and heating application in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools / universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducible test results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded for further analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven w/ Glass Door includes: - IKA Oven 125 basic dry - glass - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven w/ Glass Door Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer display7 segment LEDTime setting range1 - 144000 minNumber of trays max. 6Load for one tray max. 30 kgOperating area inner chamber 550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight81 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

2 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house two easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150 ° C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. Models with lid: from 5°C above ambient temperature to 100°C; like digital models but with a heated lid, to minimize condensation and preserve the integrity of the samples. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models)

Manufacturer: Thermo Model: FiberLite F10-6x500y Fixed Angle Rotor P/N: F10BCI-6x500y S/N: 6071644  (more)Description: Thermo FiberLite F10-6x500y rotor is a fixed angle rotor with 6x500ml-capacity and maximum speed of 10,000 rpm. Fiberlite F10-6x500 is compatible with: - Thermo Scientific Sorvall RC-6 Plus/Evolution RC/RC-6/RC-5/RC-26/RC-2 Series - Thermo Scientific Jouan KR22i Series- Beckman J2 Series/Avanti Series- Hitachi CR21/22 Series Specifications: - Material: Carbon Fiber Composite- Capacity: 6 x 500 mL- Maximum Speed: 10,000 rpm- Maximum Sample Density: 1.2 g/mL- Tube Dimensions Ø x L: 70 x 160 mm- Angle: 23°- K Factor: 3413.0- RCF max: 17,700 xg- RCF min: 4,592 xg- Radius max: 158.0 mm- Radius min: 41.0 mm Items delivered: - Thermo FiberLite F10-6x500y Fixed Angle Rotor Condition: The rotor is in good cosmetic condition. It is good working being 100% functional tested. Buy with confindence - it is ready for you to use.

IKA ICC 100 Lite Eco 8 Open Bath Heating Circulator Working temperature Room Temp. to 100°C Capacity (more) 8 L Temperature Stability DIN 12876 ±0.05 K Features - Compact immersion circulator with high-quality design and efficient operation - Equipped with PID temperature control for precise performance - LED displays for both working and safety temperature readings - Includes optical and acoustic warning functions for enhanced safety - Adjustable safety circuit ensures secure operation - Compatible with ready-to-connect packages for convenient setup - Features sub-level protection for added reliability - Lightweight and compact design for easy handling and storage The IKA ICC 100 Lite Eco 8 Open Bath Heating Circulator is a compact and efficient solution for precise liquid tempering in laboratory applications. Designed with a focus on essential functions, this high-quality immersion circulator delivers reliable performance with minimal complexity. Equipped with PID temperature control, it ensures precise and stable operation, making it ideal for applications up to 100 °C. The dual LED displays provide clear and immediate readings for both working and safety temperatures, while optical and acoustic warning functions enhance user safety and process monitoring. The ICC 100 Lite features an adjustable safety circuit and sub-level protection, offering robust safeguards during operation. Lightweight and compact, the circulator is easy to handle and store, while the compatibility with ready-to-connect packages simplifies system configuration, ensuring seamless integration into your workflow. Built to DIN 12876 standards with a Class III designation, the ICC 100 Lite combines reliability with modern design. Its 2000 W heat output ensures rapid heating, and the unit's calibration option provides flexibility for specialized applications. Measuring just 5.3 x 11.9 x 7.1 inches and weighing 9.3 pounds, this compact device is both space-saving and powerful, making it an excellent choice for labs requiring efficient temperature control solutions. INCLUDED: The IKA ICC 100 Lite Eco 8 Open Bath Heating Circulator includes: - ICC 100 lite Compact Immersion Circulator - IB 8 eco Plastic Bath (size S) - BS.ICC lite Small Bath Bridge - Power Cord - Operator's Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.