General laboratory equipment - other

The supply voltage converts AC line voltage to 20kHz electrical energy. This high-frequency electric (more)al energy is fed to a converter where it is converted into mechanical vibrations. The heart of the transducer is a lead zirconate titanate electrostrictive element which, when subjected to an alternating current, expands and contracts. The transducer vibrates in a longitudinal direction and transmits the motion to the horn tip which is immersed in the solution, causing cavitation. The implosion of microscopic bubbles or voids in the solution results, intensively stirring the molecules in the medium. The Sonifier operates in two modes: Pulsed and Continuous. In Pulsed Mode, ultrasonic vibrations are transferred to a solution at a rate of one pulse per second. This pulse duration can be adjusted from 0.1 to 0.9 per second, allowing the solution to be processed at full ultrasonic intensity as the temperature builds up – particularly valuable when processing hot volatile solutions and temperature sensitive material. In continuous mode, the Sonifier can be set for continuous duty. Used for: sample preparation, cell disruption, nanoparticle dispersion, mixing, homogenization, DNA, cell lysis, protein extraction

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm Maximum print width: 203 dpi  (more)– 104 mm, 300 dpi – 105.7 mm Programmable constant print speeds: 203 dpi – 2 to 6 inch/sec, 300 dpi- 2 to 4 inch/sec Media label width: Minimum – 25 mm, Maximum 118 mm, Maximum tear/cutter – 114 mm Media total thickness (including liner, if any): Minimum – 0.060 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 38.1 to 76.2 mm core – 213 mm Ribbon width: Minimum – 30 mm, Maximum – 110 mm Ribbon standard lengths: 76 mm diameter – 450 m Dimensions (HxWxD): 283 x 276 x 454 mm Weight: 13 kg

The Agilent 2100 Bioanalyzer is a unique and versatile analysis tool designed to efficiently handle  (more)nucleic acids, proteins and cells on a single platform. Designed to eliminate time-consuming procedures, the Agilent 2100 system employs micro-fabricated chips which accommodate up to 12-wells requiring minimum sample consumption in the low µl-range. The compact and powerful system design of this Agilent Bionalyzer enables easy, fast, and efficient sample handling, detection, separation, and data analysis. The 2100 system prevents potential mistakes in data interpretation and storage using its efficient lab-on-a-chip technology. This bioanalyzer helps enhance PCR reactions for a variety of procedures including gene expression and  cloning. With its advanced microarrays and microarray scanner, the Agilent 2100 provides accurate solutions for gene expression analysis. The device can be used with Agilent’s add-on pressure cartridge, cell fluorescence software, and Cell LabChip for a wide range of cell applications and cytometric analyses (all not included). Including PC

Seat height: 520 – 680 mm

Seat height: 600 – 850 mm

Diameter: 75 mm Suction nozzle diameter: 380 mm Extraction arm length: 1550 mm Including connector

Dimensions (WxHxD): 600 x 460 x 580 mm

Unlike conventional spectrophotometers the Agilent 8453 does not suffer from ambient false light. Th (more)e open sample area makes it easier to access for cuvette handling and to connect tubing to a flow cell or thermostatable cell holder. The spectrophotometer is shipped with the standard single- cell holder. Standard and accessory cell holders can be removed and replaced in seconds with few or no tools. The light source for the UV wavelength range is a deuterium lamp with a shine- through aperture. As a result of plasma discharge in a low pressure deuterium gas, the lamp emits light over the 190 nm to approximately 800 nm wavelength range. The light source for the visible and SWNIR wavelength range is a low- noise tungsten lamp. This lamp emits light over the 370 nm to 1100 nm wavelength range.

S+B 3 Drawer cabinet low White 600x480x450

External dimensions (WxDxH): 598 x 615 x 2050 mm Internal dimensions (WxDxH): 477 x 425 x 1858 Weigh (more)t: 372 kg Min. quantity of exhaust air 10 times: 4 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Air exchange, 120-fold: 42 m³/h Pressure loss at 120-fold air change: 95 Pa Pressure loss with 120-fold air exchange (EK5/AK4): 85 Pa Floor load: 999 kg/m² Maximum load: 600 kg

Illuminated area: 435 x 350 mm Lamps: 2 x 15 W Color temperature: 5000 Kelvin

Temperature: -90°C Dimensions (WxDxH): 500 x 800 x 400 mm Weight: 35kg Including a Thermo VLP200 vac (more)uum pump

Dimensions (WxDxH): 1200 x 940 x 2400 mm Internal dimensions (WxDxH): 1100 x 700 x 900 mm Base cabin (more)et with extraction Taps: Compressed air, Gas, Water Extraction diameter: 195 mm

S+B Plinth cabinet 3 Drawer L.Grey 600

Interfurn Storage cupboard Double door Creme Dimensions (HxWxD): 2010 x 1200 x 490 mm

S+B Plinth cabinet door LT White 420

S+B Plinth cabinet door LT White 600

S+B Plinth Cabinet high RT White 600

The supply voltage converts AC line voltage to 20kHz electrical energy. This high-frequency electric (more)al energy is fed to a converter where it is converted into mechanical vibrations. The heart of the transducer is a lead zirconate titanate electrostrictive element which, when subjected to an alternating current, expands and contracts. The transducer vibrates in a longitudinal direction and transmits the motion to the horn tip which is immersed in the solution, causing cavitation. The implosion of microscopic bubbles or voids in the solution results, intensively stirring the molecules in the medium. The Sonifier operates in two modes: Pulsed and Continuous. In Pulsed Mode, ultrasonic vibrations are transferred to a solution at a rate of one pulse per second. This pulse duration can be adjusted from 0.1 to 0.9 per second, allowing the solution to be processed at full ultrasonic intensity as the temperature builds up – particularly valuable when processing hot volatile solutions and temperature sensitive material. In continuous mode, the Sonifier can be set for continuous duty. Used for: sample preparation, cell disruption, nanoparticle dispersion, mixing, homogenization, DNA, cell lysis, protein extraction

The Ettan IPGphor Isoelectric Focusing System performs first dimension isoelectric focusing (IEF) in (more) 2-dimensional (2-D) electrophoresis. The system comprises Immobiline DryStrip gel strips, which contain an immobilized pH gradient (IPG); strip holders, which serve as both rehydration and IEF chambers for the IPG strips; and the Ettan IPGphor unit, which includes a high-voltage DC power supply, solid state temperature control, and can be programmed with up to ten user-defined IEF protocols. Programmable functions include: • rehydration time • platform temperature • maximum current limit • voltage change pattern • voltage for each step in the isoelectric focusing program, and  step duration. Working surface Electrode areas: Gold-plated copper Strip holder capacity: Up to 12 fixed-length, up to 9 cup loading Platform temperature: 18°C – 25°C, ±1°C Strip holders Material: Aluminum oxide ceramic base, acrylic cover, polycarbonate, platinum on titanium Holders for IPG strip lengths: 70, 110, 130, 180, and 240 mm User interface Control panel: 7-key membrane keypad. Liquid crystal display (LCD): 2 lines, 16 characters per line Programmable parameters: Rehydration time, platform temperature, maximum current limit per strip, step voltage, step voltage change pattern, and step duration. Protocol capacity: 10, with up to 9 steps each Power outputs Voltage: 0 – 8000 V, resolution 10 V Current 0 – 1.5 mA, resolution 0.01 mA Power:  12 W max Physical parameters Dimensions (HxWxD): 140 x 250 x 460 mm Weight: 6.8 kg

Capacity: 500 L Minimum temperature: -10°C Maximum temperature: 50°C Maximum pressure 16 bar

Capacity: 100 L Max pressure: 11 bar Permissible temperature range: -10°C to 100°C

The EASYSOFT SXT2 consists of a plastic softener tank with internal water distributors. In the integ (more)rated salt storage vessel, brine is automatically prepared for the resin regenerations. Furthermore, the EASYSOFT SXT2 is equipped with an integrated double 3-way bypass valve for decommissioning the water softener while preserving the water supply. On the SXT2 version of this model, a fully automatic control valve (with built-in microprocessor) is mounted on the tank. This ensures the regeneration of the resin. The EASYSOFT SXT2 is also equipped with a mixing device integrated in the control valve to set a residual hardness. The regeneration of this microprocessor controlled water softener can be done in three ways: volume, time and a combination of the two. Capacity: 450 l/h Period capacity (at 10 °dH) min/max: 2.0/3.4 m3 Salt consumption per complete regeneration min/max: 0.7/2.2 kg Resin content per tank: 9 l Salt container content: 25 kg Required water pressure min/max: 2.0/7.0 bar Dimensions (WxDxH): 262 x 463 x 640 mm

Edwards acoustic enclosures provide soundproofing for your pump operations in laboratories or sensit (more)ive industrial work environments. High noise absorption materials reduce pump noise by up to 9 dB (A), without adversely affecting your vacuum pump efficiency. A integrated air-cooling fan provides ventilation to maintain your optimum pump running temperature.