Asecos G90 Gas Cylinder Cabinet

Mettler Toledo LabMax Automatic Lab Reactor This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in full working order prior to removal.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Ohaus 30553085 4 x 750ml Swing Out Rotor The Ohaus 30553085 4 x 750ml Swing Out Rotor accommodates a (more) capacity of up to 4 x 750 ml. This rotor is designed for use with Ohaus FC5916, FC5916R series centrifuges and reaches speeds up to 4,500 RPM with a maximum RCF of 4,346 x g. INCLUDED: The Ohaus 30553085 4 x 750ml Swing Out Rotor includes: - Ohaus 30553085 4 x 750ml Swing Out Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Bunsen Vortex Shaker - AGT9 tube mixer. Speed range from 50 to 2600 rpm. Head stock for mixing test  (more)tubes of up to Ø 20 mm. Specifications: • It has two switchable working modes: - Continuous mode for uninterrupted mixing. - Manual mode in which mixing is activated automatically by slightpressure from the tube on the head stock. • Metal housing painted in epoxy. • Electronically regulated speed control. Stirring speed Variable between 50 and 2600 r.p.m Power 48 W Dimensions (W x H x D) 140 x 100 x 155 mm Weight 4 kg Eccentricity 6 mm

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Key features: High precision measurements Stability over Time Calibration and Strict Quality Control Versatility of Applications Cylindrical shape Nominal value: 10 kg

Temperature control range: -5°C to 99°C Usable temperature range: from 30°C below room temperature t (more)o 99°C Temperature accuracy for 0°C: ±1.0°C 37°C: ±0.5°C 90°C: 1.0°C Heating rate: 5°C/min Cooling rate simple temperature operation: 6.0°C/min between 99°C and 25°C 1.5°C/min between 25°C and -5°C Temperature deviation across blocks: Max 0.2°C Dimensions (WxDxH): 220 x 250 x 125 mm Weight: 5 kg Excluding block