MSE Mark No2 Consolidation Testing System Controlled Rate of Strain 2726 Lab

Scilogex 24 x 1.5/2ml Plastic Rotor Kit with LidThe Scilogex 24 x 1.5/2ml Plastic Rotor Kit with Lid (more) accommodates 24 x 1.5/2ml centrifuge tubes and reaches a maximum speed of 14,000RPM. For use with DM1424 Hematocrit Centrifuge. Kit includes lid, fixing clips, and O'ring. INCLUDED: The Scilogex 24 x 1.5/2ml Plastic Rotor Kit with Lid includes: - Fixing Clips - O-Ring - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Mobile System with Heat BoostCentriVapMobile Systems combine the separate vacuum  (more)concentrator and cold trapcomponents into one space-saving console and include casters for portabilityfrom laboratory to laboratory. A 12-13 mm Rotor and Solvent Trap are alsoincluded. The interior can accommodate a vacuum pump — the only additionalcomponent necessary to begin processing. INCLUDED: The Labconco 7812013 CentriVap Mobile System with Heat Boost, 115V, 60Hz includes: - Rotor 12-13 mm - Coupling Insert - Cartridge, Solvent Trap - Clamp - Power Cable - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Manufacturer: Shiseido CAPCELL PAK Model: Capcell Pak® 5 µm NH2 UG 80 Å, LC Column 250 x 4.6 mm, Ea  (more)Part Number: CH0-3868 S/N: GQAD04061 Stationary Phase: Amino, NH2 UG Particle Size (µm): 5 Pore Size (Å): 80 Length (mm): 250 Internal Diameter (mm): 4.6 Solid Support: Polymer Format: Column Separation Mode: Normal Phase Recommended Use: Chelating compounds USP Designation: N/A Used, good condition - fully functional. 277162-8

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The Lamp and stage are operational. We tested it with a slide and it is fully working. Included with it are 3 x Objectives; 1 x Red Leica 438 Achro 4/0.1 ∞ /0.17 1 x Yellow Leica 439 Achro 10/0.25 ∞/0.17 1 x Blue Leica 440 Achro 40/0.66 ∞/0.17 2x EyepiecesLeitz Wetzlar Germany Periplan GF 12.5x

MSE Soniprep 150 Ultrasonic Disintegrator With Titanium Probes Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in working order prior to removal. This item also includes the following: Four titanium ultrasonic probes.2 x 9.5mm tips1 x 19mm tip1 x exponential probe (approx 3mm tip) 2 x "C" spanners for changing probes 1.5" and 7/8"

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.