Agilent 2100 Bioanalyzer

Hermle 50ml Insert (2pk) The Hermle 50ml Inserts are for use with the 6 x 85ml Rotor for the Z326 an (more)d Z326 K centrifuges. INCLUDED: The Hermle 50ml Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz Features - Timed  (more)dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex DS-500/1 20mm dia. generator DS-500/1 20mm dia. generator, with S20C/SR20 flat head-openslo (more)t coarse generator, 215 immerse length for solid/liquid media, volumes10-5000ml INCLUDED: The Scilogex DS-500/1 20mm dia. generator includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Biotest Hycon RCS Air Sample Plus Air Sampler.The unit is in full working cond (more)ition and is ready for immediate release.The Biotest Hycon RCS Plus Air Sampler is a highly reliable microbial air sampling system designed to monitor the microbiological quality of ambient air. It is widely used across multiple industries such as pharmaceuticals, food and beverage, healthcare, and other sectors where air quality is critical. This device operates using the impaction principle, where airborne microorganisms are captured onto an agar strip via centrifugal force for subsequent analysis.Key Features:Impaction Sampling Method: Separates and captures airborne microorganisms onto an agar strip for precise microbiological analysis.Sampling Volumes:7 preset sampling volumes: 10, 20, 50, 100, 200, 500, and 1000 litres.3 user-defined volumes adjustable between 1 to 1999 litres, providing flexibility for various sampling requirements.Intrinsic Safety: Certified to ignition class “ib,” which ensures safe operation in explosion hazard or hazardous areas.GMP and FDA Compliance: The device meets industry-standard Good Manufacturing Practice (GMP) and FDA guidelines for use in regulated environments.Adaptability: Customizable settings to fit user-specific needs and different air sampling conditions.Ergonomic Design: The lightweight and portable design allows for ease of use in routine air quality monitoring tasks.

Mettler Toledo DO308 Karl Fischer Titration Drying Oven This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Ion Torrent OneTouch 2 & OneTouch ES System This was removed from a university lab where it was  (more)surplus to requirements. The system powers up and is in good cosmetic condition with marks from use. Included are; Ion Torrent OneTouch 2Ref. INS1005527SN - 2456378-1849 Ion Torrent OneTouch ESModel - 844 1-21SN - 415929

Samples and applications - Food homogenization and preparation of spreadable creams and stuffing for (more) foods (e.g. meat, vegetables) - Preparation of samples for DNA analysis, organic tissue samples and dispersions of organic tissues - Homogenisation of tobacco leaves - Processing of textile fibres - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).