PYRO-WERK Satz von 3 Filterlinsen A-B-C 44mm Gewinde für Pyrometer

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. Reliable and easy to control Volume of 169 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Compass CX221 portable scale Ohaus The Compass CX series has been designed to have the highest possi (more)ble energy efficiency, in fact it offers you a battery life of up to 1,000 continuous hours, allowing uninterrupted operation. Slim, stackable and lightweight design, the CXs fit into lab, industrial, educational and even home environments. Simplified two-button operation makes it a breeze to use and the large backlit LCD display allows for easy viewing of weighing results. Applications Weighing, Display Hold Screen Liquid crystal display (LCD) with backlight Operation 3 x AA batteries (included) or AC adapter (not included) Communication Unavailable Construction ABS housing, stainless steel tray, transport lock, non-slip feet Characteristics of the project Stability indicator, mechanical and software overload / underload protection, low battery indicator, automatic shutdown

Dimensions (HxWxD): 2060 x 1400 x 620 mm

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

Calibration and regulation of temperatures from -25 to 200°C with LAUDA calibration thermostats The  (more)ECO calibration thermostat is designed for the specific needs of laboratories that carry out calibration and regulation work on a daily basis. The equipment was specially developed for the precise calibration of thermometers, such as industrial platinum resistance thermometers, temperature probes, thermocouples or electrical thermometers. Liquid calibration baths are considered the most stable temperature source and offer the greatest consistency for comparative calibration of temperature probes and sensors in a laboratory. LAUDA calibration thermostats are specially equipped for the calibration of glass thermometers or electric thermometers; they are an ideal solution compared to heat cabinets and metal block thermostats, as these thermostats transfer heat into the thermoregulation liquid 40 to 60 times better than through the air. The LAUDA ECO REJ 1225 G calibration thermostat is ideal for calibrating glass thermometers or electric thermometers. DISPLAY AND CONTROL The thermostat can be easily and flexibly integrated into your existing work processes thanks to a variety of interfaces, including Profibus, Ethernet or Pt100/LiBus. The large color TFT display offers a clear overview at a glance and allows you to program a variety of temperature curves, which are automatically processed by the thermostat to support your daily laboratory work. - Color TFT display for simultaneous indication of actual and set values ​​and temperature profile graph - Intuitive menu navigation in simple language - Simple entry via cursor and function keys. Additional Tmax button for overtemperature protection - Fully electronic stepless controller with PID action - USB interface as standard - Upgradeable with Pt 100/LiBus module for external control and remote control via command console - Programmer with 150 temperature/time segments separable into 5 programs CONSTRUCTION AND BATH - Thermostatic calibration bath with the latest microprocessor technology and integrated cooling system - Safety class III for operation with flammable and non-flammable liquids. - Too high temperature protection adjustable via menu - Pump with six adjustable power levels - Easy flow control between internal and external circulation - 2 separate chamber design for a constant level in the thermostating chamber - Vertical adjustment for calibration chamber overflow - Stainless steel bath with drain valve Why LAUDA thermostats? Calibration applications require thermostats that maintain a constant, temperature-independent liquid level. To achieve this, LAUDA uses a two-chamber tank, the temperature chamber and the operation chamber, also known as the usable space or buffer chamber. A unit pumps fluid from the heat chamber to the application chamber where, if it is overfilled, it has the potential to overflow back into the heat chamber. The cylindrical working chamber is height adjustable, which makes it possible to adjust the immersion height. The thermometers, completely immersed, can therefore be read directly at the point of immersion. Furthermore, the separate calibration chamber ensures constant immersion depth, regardless of liquid volume expansion, excellent temperature stability of ±0.02 K and homogeneous temperature distribution. Standard accessories - 2 screw caps, 2 closing caps - 1 bath cover Performance graph of the pressure pump on the six levels. GREEN TECHNOLOGY The LAUDA ECO calibration thermostat uses refrigerants compliant with the European regulation on fluorinated gases. Furthermore, the REJ 1225 G is optionally available with natural refrigerants.