Witeg Wisd WiseClean WUC A22H Ultrasonic Bath Ultraschallbad

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

Temperature range: ambient temperature +5ºC to 99ºC Temperature display and setting resolution: 0.1º (more)C Temperature stability: ±0.2ºC Capacity: 12 litres Unique Set and Forget technology – fast heating, precise temperature control Simple, intuitive operation – quickly and easily set the temperature Suitable for use with heat transfer beads Adjustable over-temperature alarm – protect samples from overheating Convenient front panel lock – disables front panel controls and prevents accidental changes Lid included

Hersteller: Thermo Scientific Modell: Megafuge 16R + TX-400 15/50ml - Jahr 2018   Beschreibung:   Di (more)e Thermo Scientific Heraeus Megafuge 16R Kühlzentrifuge ist eine Kühlzentrifuge, bei deren Entwicklung der Benutzer im Mittelpunkt stand. Das benutzerfreundliche Bedienfeld macht es einfach die Voreinstellung von Drehzahl, RCF-Wert, Laufzeit, Temperatur und Laufprofil. Die eingestellte Drehzahl wird innerhalb von Sekunden erreicht. Die Megafuge 16R erreicht maximale Drehzahlen von 15.200 U/min und eine maximale RCF von 25.830 x g. Der wartungsfreie Induktionsmotor sorgt auch bei hohen Drehzahlen für einen leisen und vibrationsarmen Betrieb und garantiert eine sehr lange Lebensdauer. Kernmerkmale: - Einfach zu bedienendes Bedienfeld zur Einstellung von Geschwindigkeit, RCF-Wert, Zeit, Temperatur und Laufprofil. - Ausgestattet mit einem Induktionsmotor, der einen leisen, vibrationsarmen Betrieb und eine lange Lebensdauer gewährleistet. - Gehäuse und Rotorkammer aus Stahlblech, mit einem Innenraum aus Panzerstahl und einer hochschlagfesten Kunststoff-Frontplatte. - Der Deckel ist mit einer Sichtöffnung und einem Schloss versehen und kann nur geöffnet werden, wenn der Rotor vollständig stillsteht, um die Sicherheit zu gewährleisten. - Integrierte Rotorerkennungssysteme verhindern unzulässige Drehzahl Einstellungen. - Automatische Erkennung und Reaktion auf Unwuchten zur Erhöhung der Betriebssicherheit. - Ausgestattet mit Kühlung, um die Integrität der Probe während Hochgeschwindigkeitsbetrieb. - Erreicht innerhalb von Sekunden die eingestellte Geschwindigkeit und verbessert so die Effizienz der Arbeitsabläufe im Labor. Technische Daten: Max. RZB: 25,830 × g Drehzahl: 300 – 15,200 rpm Max. Kapazität: 4 × 750 mL/4 × 4 MTP Geräuschpegel: <63 dB(A) Netzanschluss: 230 V, 50 – 60 Hz Max. Stromverbrauch: 1400 W Abmessungen (B × T × H): 360 × 623 × 605 mm Temperaturbereich: -10 °C bis 40 °C Lieferumfang: - Megafuge 16R + TX-400 15/50ml - Jahr 2020 - Bedienungsanleitung als PDF via E-Mail Auf Wunsch können wir Ihnen beliebige Adapter für die Zentrifuge mit anbieten. Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.

Technical features Flow rate (max.) 30 l / min Ultimate vacuum (max.) 160 mbar (abs.) Operating pres (more)sure (max.) 0.5 bar (rel.) Permitted fluid temperature 5-40°C FFPM valve material Membrane material PTFE coating PPS pump head material Applications Filtration Degassing Drying Aspiration of fluids Solid phase extraction Qualitative characteristics Clean operation, 100% oil free Corrosion resistant Compact, silent and reliable Small footprint It can handle humid vapors without damage Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

For sale: Agilent G1158A column switch valve (2-position/6-ports)   LAB2 has more Agilent switching  (more)valves in stock. Please contact us for more information.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included)

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree; the transparent internal door. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.