Velp FOC 200I Connect Incubator

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

Un incubatore da laboratorio refrigerato di grande potenza e affidabilità. Grande dotazione di acces (more)sori e dotato di autosterilizzazione! Regolazione fine della temperatura, display chiaro e completo, classe di sicurezza al top. MATERIALI: - Struttura esterna in lamiera d’acciaio verniciata a forno con polvere epossidica antiacida - Camera interna in acciaio inox - Maniglia ergonomica, facile da usare e robusta DI SERIE: - Termoregolatore PID con doppio display e temperatura regolabile da 0°C a 100°C - Porta interna in vetro - 2 ripiani - Foro 10 mm per - Classe di sicurezza DIN 3.1, la più alta - Ventilazione forzata - Uscita dati RS-485 - Software gestione dati, cavo e adattatore USB di serie - Ciclo di sterilizzazione (160°C per 2,5 ore) Incubatore refrigerato ICT-C 52

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

LMS 400NP Cooled Incubator This item was removed from a university where it was surplus to requireme (more)nt. The incubator is in excellent cosmetic condition and powers on.However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C. Therefore, it is listed as Spares/Repair. Specifications: - Serial No.: 12425/17PP - Capacity: 450 litres - Internal dimensions: 64 x 55 x 118 cm (l x w x h) - Temperature range: -10°C to 50°C - 4 height adjustable shelves (56 x 60 cm) - Factory set auto defrost system

Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V delivers precise, energy-efficient temperature control for advanced laboratory applications. With a generous 108-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator supports a variety of sample requirements. The energy-saving Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY, equipped with a PID-microprocessor controller and high-definition TFT displays, provides easy monitoring, while the SetpointWAIT function enhances accuracy by starting process timing only once the desired temperature is reached. This incubator’s robust stainless steel interior and textured exterior resist corrosion and allow for easy maintenance, ideal for long-term use in demanding environments. Safety features include an AutoSAFETY over- and undertemperature monitor with both visual and acoustic alarms, ensuring protection for sensitive samples. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault detection, and a capacity for up to five shelves with a maximum chamber load of 330 lbs, make the IPP110ecoplus a versatile and reliable choice for modern labs. INCLUDED: The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA INC 125 F Digital Incubator Temperature Range Ambient +8°C to 100°C Temperature Uniformity ± 0. (more)3 K Chamber Volume 125L Features - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode (120°C) for disinfection and reduction of cross-contamination - Wide temperature range: RT +8°C to 100°C - Excellent temperature stability and uniformity of +/- 0.3 K - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) and ventilation flap (0-100%) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber - Additional inner glass door for observation of samples without temperature loss - Very large LCD display for easy reading - Counter, timer and timer auto function ensure reproducible test conditions The IKA INC 125 F Digital Incubator is ideal for microbiological applications up to 100°C thanks to its precise temperature control. The supply of preheated air into the temperature chamber can ensure fast, stable, and uniform temperature control. With a capacity of 125 liters, INC 125 F digital offers the largest volume in its class. Up to six grid shelves can be accommodated simultaneously in the spacious chamber. Click Here to View Product Video INCLUDED: The IKA INC 125 F Digital Incubator includes: - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Qiagen Pyromark Q96 ID System Lab This item is sold on behalf of a client. It is surplus to requirem (more)ents. It is in good cosmetic condition and full working order. It is available for collection from London, UK, but we may be able to offer shipping for an additional fee.The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

A&D Weighing Apollo GX-124A Analytical Balance, 120 g, 0.1 mg Capacity 120 g Readability 0.0001 (more) g Repeatability 0.0001 g Features - Increase productivity with 1.5 second stabilization time using Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-124A Analytical Balance, 120 g, 0.1 mg, delivers exceptional precision in measurement tasks, enhanced by its Smart SHS technology that accelerates the stabilization time to just 1.5 seconds. This balance efficiently conducts repeatability testing and precision checks internally without the need for external weights, courtesy of its Electronically Controlled Load (ECL) management. This feature not only improves workflow efficiency but also ensures compliance with USP41 by minimizing sample sizes, thereby reducing waste and maximizing resource use. The balance's robust design includes impact shock detection and overload protection, safeguarding the device against potential damage and ensuring consistent performance over time. Designed for simplicity and operational efficiency, the Apollo GX-124A features an intuitive interface with six easy-to-use keys and a quick toggle that allows for seamless switching between USB and RS-232C communications. This makes it adaptable to a variety of laboratory data management systems. The balance is also equipped with a brightly illuminated, front-mounted level indicator, ensuring it can be easily and accurately leveled, even when operators are wearing gloves. The A&D Weighing Apollo GX-124A supports a broad spectrum of scientific applications with its extensive range of measurement units, including mg, g, oz, ozt, ct, mom, dwt, gr, pcs (counting), % (percent mode), and SG (density mode), enhancing its versatility in various laboratory settings. Automatic self-calibration and an option for one-touch internal/external calibration maintain the balance's accuracy and reliability. Built to withstand the demands of high-throughput environments, this analytical balance combines precision, ease of use, and a durable construction to meet the rigorous standards required by professionals in the field. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-124A Analytical Balance, 120 g, 0.1 mg includes: - External Key Jack - Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus FC5515 Frontier Micro Centrifuge w/ Selectable Rotor Speed Range 200 to 15,200 RPM Maximum Cap (more)acity 44 x 1.5/2.0ml or 12 x 5ml Warranty 2 Year Manufacturer's Features - Easy-to-turn rotary knob for parameter adjustments - Waterproof keypad provides protection that helps significantly increase the lifespan of the product - One-touch toggling between speed and g-force - LCD display which projects information in real-time - View and adjust user parameters from the main screen; no need to navigate through sub-screens - Powerful induction motor reaches speeds up to 15,200 RPM in less than 16 seconds - Maximum g-force of 21,953 RCF - 10 acceleration/deceleration settings - 99 memory sets for commonly used speed and time settings - Motorized lid-locking system prevents centrifuge from opening during operation - Rotor imbalance sensing system stops the motor should the rotors become imbalanced, protecting the user from spinning rotors Click Here to View Product Video The Ohaus FC5515 Frontier Micro Centrifuge provides high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, the FC5515 provides stable liquid separation for life science applications requiring high-speed operation. The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force. A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly used parameters are a few of the FC5515’s features that propel high-performance. Among the FC5515’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from by the high-speed spinning rotors. Compatible with seven different rotors, more than any centrifuge in its class, the highly versatile FC5515 can be used for various applications of different volumes. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5515 Frontier Micro Centrifuge w/ Selectable Rotor includes: - FC5515 Frontier Micro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z600-500-P 500ml, Centrifugal Basket, Non-Perforated Benchmark Hermle, Z600-500-P, 500ml, Cen (more)trifugal Basket, Non-PerforatedINCLUDED: The Hermle Z600-500-P 500ml, Centrifugal Basket, Non-Perforated includes: - Manufacturer's Documentation - 5 Year Manufacturer's Warranty