Leitz Leica EF L 10x/0.25 PHACO 1a 160/- Microscope Objective Objektiv 518087

This Zeiss Axiovert 25 Inverted Fluorescence Phase Contrast Microscope was removed from a university (more) lab where it was surplus to requirements. The unit powers up and all the objectives appear to focus well. It is in good cosmetic condition with only minor marks from use. There are 2 x Objectives included, and they are as follows; Zeiss LD Achrostigmat 32X/0.40 ∞/0.5-1.5 Ph1 Zeiss CP-ACHROMAT 10x/0,25 ∞/- PH1 Eyepieces: 2 x E-Pl 10x/20

Arcturus PixCell II Laser Capture Microdissection Microscope System Lab This system was removed from (more) a university where it was surplus to requirement. All units are in good cosmetic condition and powered up, although due to the faults listed below this system is listed as Spares/Repair.  Faults: - The PCi graphics card is faulty. - Camera not included to operate as a complete system. - The microscope does not include any eyepieces or objectives. - The control unit cable sleeving is damaged. The system comprises the following: Arcturus PixCell II Microscope Arcturus PixCell II Control unit Computer - Dell OptiPlex GX1 - Software installed: Arc200 1.0.2 Monitor - NEC MultiSyncLCD1550V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Millipore Progard TS2 Pretreatment Pack.The unit is in full working condition  (more)and is ready for immediate release.The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems.Key Features:Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes.Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage.Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality.Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time.Technology and Monitoring:e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring.Benefits:Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system.Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes.Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime.Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Hermle 24x1.5/2.0ml Rotor, Hermetically Sealed The Hermle 24x1.5/2.0ml Rotor, Hermetically Sealed is (more) a specialized centrifuge rotor designed for use with Hermle Z32-HK, Z307, Z327, Z366, and Z446 series centrifuges. The rotor is hermetically sealed, which helps to prevent contamination of samples and makes it easy to clean and maintain. The rotor has a maximum speed of 15,000 RPM (16,000 RPM with K models and 20,000 RPM with Z32-HK model only) and can generate a maximum relative centrifugal force (RCF) of 21,379 x g (24,325 x g with K models and 38,007 x g with Z32-HK model only). It has a capacity of 24 x 1.5/2.0ml tubes, and its 45° angle allows for efficient separation of samples. It should be noted that the rotor only reaches a maximum speed of 14,000 RPM when used with the Z307 centrifuge model. Overall, the Hermle 24x1.5/2.0ml Rotor is a reliable and high-performance centrifuge rotor that is ideal for use in a wide range of laboratory applications. INCLUDED: The Hermle 24x1.5/2.0ml Rotor, Hermetically Sealed includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf Minispin Centrifuge with F-45-12-11 Rotor The Eppendorf Minispin Centrifuge is a small, bu (more)t versatile centrifuge suitable for just about any laboratory environment. With a maximum speed of 13,400rotations per minute and a maximum RCF of 12,100 x g, the Eppendorf Minispin iscapable of spinning small samples with exceptional speed and force. At only 9.8 pounds, the Eppendorf Minispin isextremely portable and can be used in the field with ease. Similarly, its compact size makes the Minispin versatile within the lab and field, capable of being within arms-reach of a computer or workstation, without procuring a bulkyfootprint. The Eppendorf Minispin Centrifuge with F-45-12-11 rotor is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 6 Month Parts and Labor WarrantyEppendorf Minispin Centrifuge with F-45-12-11 Rotor SpecificationsMaximum Speed13,400 rpmMaximum RCF12,100 x gMaximum Capacity12 x 1.5/2.0mlDimensions8.9 W x 9.4 H x 4.7 L in.Weight9.8 lbs.Noise LevelUnder 49 dBaElectrical120V/50-60Hz

Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000uL Adjustable or Fixed Volume Adjustable Volume Ra (more)nge 0.5 to 1000uL Pipette Type Air Displacement Features - Mechanical air-cushion pipette with standard 3-button operation (one operating element for volume selection, one for pipetting, and one for tip ejection) - Ideal for accurate, easy, and ergonomic manual pipetting of aqueous solutions - Feel the difference in weight and pipetting forces: Designed according to the Eppendorf PhysioCare Concept® principles - Benefit from one of the lowest operating and tip ejection forces on the pipette market, helping to reduce hand and arm strain - Enjoy minimal tip attachment forces due to a spring-loaded tip cone (available for all pipettes up to 1 mL) - Temporarily adjust your pipette in seconds for better accuracy when pipetting challenging liquids like ethanol or when pipetting at high altitudes. Return to factory adjustment without calibration - Autoclave the entire pipette or only the lower part according to your needs and applications to ensure a proper decontamination - Premium material ensures a high UV and chemical resistance; special single-channel lower parts for aggressive chemicals available - ACT®-labeled single-channel pipettes and epT.I.P.S.® pipette tips help you make an informed choice when it comes to sustainability The Eppendorf Research Plus 3 Pipette Kit offers an ergonomic and lightweight solution for precise manual pipetting. This kit features a mechanical air-cushion design with a standard 3-button operation, facilitating volume selection, pipetting, and tip ejection. It is engineered to minimize strain with one of the lowest operating and tip ejection forces available, thanks to its compliance with the Eppendorf PhysioCare Concept®. The spring-loaded tip cone ensures minimal attachment forces for pipettes up to 1 mL, enhancing user comfort. Adjust the pipette quickly for specific needs like pipetting challenging liquids or working at different altitudes, with an easy return to factory settings without recalibration. Each component, from the pipette to the lower part, can be autoclaved for thorough decontamination. Made with premium materials, these pipettes offer high UV and chemical resistance, and they are available with single-channel lower parts designed for aggressive chemicals. The ACT® label on single-channel pipettes and epT.I.P.S.® pipette tips highlights their eco-friendly attributes. These durable, intuitive pipettes feature 4-digit displays and color coding for easy selection, providing a dependable and sustainable option for daily laboratory tasks. INCLUDED: The Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000ul includes: - 3 Single-Channel Pipettes (0.5 - 10 uL, 10 - 100 uL, and 100 - 1000 uL) - 3 x epT.I.P.S Pipette Tips Boxes (x 96 tips, 20 uL M, 200 uL, 1000 uL) - Operator's Manual - Manufacturer's Documentation - 6 Month Full Parts and Labor Warranty Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000uL SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeAir DisplacementPipette Volumes0.5 to 10 uL (adjustable in 0.01 uL increments)10 to 100 uL (adjustable in 0.1 uL increments)100 to 1000 uL (adjutable in 1 uL increments)Maximum Systematic Error0.5 to 10 uL: ± 8% (± 0.1 uL)10 to 100 uL: ± 3% (± 0.5 uL)100 to 1000 uL: ± 3% (± 6 uL)Maximum Random Error0.5 to 10 uL: ± 5% (± 0.04 uL)10 to 100 uL: ± 1% (± 0.15 uL)100 to 1000 uL: ± 0.6% (± 2 uL)Pipette SeriesResearch PlusDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .features-side img{height:500px;}

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interface RS232. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.