Labcaire PCR6 PCR Workstation

This listing is for 1 of 2 Roche LightCycler 1.5 Thermal Cycler

Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch The Benchmark H5100-02 (more) 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-02 is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z207-3202 4 x 8 PCR Strip Rotor (for Z207-M only) The Hermle Z207-3202 4 x 8 PCR Strip Rotor  (more)(for Z207-M only) is for use with Hermle Z207-M Centrifuge. This rotor has a maximum speed of 13,500 RPM, and a maximum capacity of 4 x 8-PCR Strips. INCLUDED: The Hermle Z207-3202 4 x 8 PCR Strip Rotor (for Z207-M only) includes: - Hermle Z207-3202 4 x 8 PCR Strip Rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2000-N-1000 qMAX Green, with Blue Tracking Dye, No Rox qPCR Mix, 1000 Reactions Supplied a (more)s a ready-to-use 2X master mix, qMax Green has been engineered for high sensitivity, fact cycling and excellent reproducibility. Accuris Hot Start Polymerase provides accurate PCR of a variety of templates including low copy number and difficult sequences, while the proprietary qMax Green intercalating dye exhibits higher fluorescence and lower PCR inhibition than other popular green dyes.These two components are supported by a specially formulated buffer with an exacting combination of salts, PCR enhancers, stabilizers and pH that results in earlier Ct values and a high specificity across a broad dynamic range. An inert blue dye is also mixed into the qMAX Green to allow easy visualization during pipetting. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2000-N-1000 qMAX Green - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

All-in-one PCR plate centrifuge/vortex mixer that allows for the simultaneous sample preparation of  (more)multiple samples at one time. Versatile through being able to hold non, semi and fully skirted PCR plates with no additional accessories required. The CVP-2 offers three devices in one. • Centrifuge with vortex mixing • PCR plate centrifuge • PCR plate mixer Dimensions (hxdxw): 190 x 350 x 285 mm Centrifuge mixing speed control range: 300 to 1500 rpm Vortex mixing speed control range: 300 to 1200 rpm Speed control increment: 100 rpm G-force/RCF: 245 Centrifuge timer with sound alarm: 0 to 30 minutes Vortex timer with sound alarm: 0 to 60 seconds Centrifuge/vortex cycles: 1 to 999 Capacity: 2 non-, semi or fully skirted microplates External power supply: Input AC 120-230V, 50/60Hz, Output DC 24V Power consumption 18 W (0.75A) Input voltage: 24V DC Weight: 6.15 kg

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB model - For tanks of 200 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x600 mm.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW