Vacuubrand VAP 5 Vacuum Controller

pH controller for the Electrolab FerMac 200 fermentation system. The FerMac 260 features a high impe (more)dance integrated amplifier to ensure accurate pH measurement and to accommodate a wide variety of pH electrodes. The pH controller uses industry standard peristaltic pumps.

Beckman Coulter Z1 Particle Counter with Controller This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. it is in good cosmetic condition with minor marks.

Watson Marlow 205U with 205CA8 8-Channel 8-Roller This item was removed from a university lab where  (more)it was surplus to requirements. The unit powers on and is in good cosmetic condition with minimal wear. It was tested to its maximum RPM of 90 and operated as expected.The rotation switch (CW and CCW) also functions correctly. Specifications:- Model: 205U Auto Drive 1 PH - Serial No.: K090777 Includes:- 205CA8 8-Channel 8-Roller - Part No.: 023.1201.000 - Issue: 2 - Serial No.: K090593

This Leica Reichert Ultracut S Microtome & Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. The lights work, and the microtome itself is mechanically sound. Leica Reichert Ultracut SType - 702501SN - 420699 StereoZoom 6Zoom Range 0.67X - 4.0X 2 x Eye Pieces 15X W.F. Stereo (31-05-62) ControllerType - 654901SN - 89465

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a VWR VisiScope IT404 MicroscopeVisiScope IT 404 inverted microscope offers a co (more)mplete solution for your brightfield observations. The IT 404 inverted microscope is equipped with a full set of objectives that covers most standard applications. A mechanical stage is included along with 4 objectives (4x and 40x for brightfield; 10x and 20x for phase contrast).The light ring of the adjustable phase contrast slider is pre-centered when the microscope leaves the factory. It should therefore need no further adjustment. If a re-centering is needed, it can be performed via the two side bolts. The 4X/10X light ring must be used with 4X and 10X phasecontrast objectives, the 20x/40x light ring with the 20x and40x and the opening is used for bright field.The Moticam 5 is an attachable digital C-mount camera with CMOS-Sensor and it features a 5MP live resolution capability along with:- Live resolution: 5.0MP (2592x1944)- Optical calculation: 1/2,5"- Output: MiniUSB- Focusable lens: 12mm- 2 variable diameter eyepiece adapters- Macrotube for specimens observation- Motic Images Plus 2.0 for PC and MAC- Motic 4-dot calibration slideFeatures:- Ergonomic:Every control is easy to reach and every component has been designed with ease of use in mind. Focusing and specimen movement controls allow the wrists to rest on the bench. Light intensity adjustment is placed very close to the focusing knobs. The specimen stage is fitted with a special glass insert that allows you to see the objectives for immediate identification of the magnification set-up. An ergo head allows compensation for operator height.- Efficiency:Plan achromatic, infinity corrected optics, bright 8 W LED illuminator, phase contrastset, holders for specimen slides, flasks, Petri dishes, trinocular head for photo/ video applications. These are the features of IT 404, a powerful, complete and innovative instrument, designed to set a reference standard for routine and advanced tissue culture.- User comfort:The 22 mm extra widefield optics are pleasant to use minimising operator stress. The special eyepieces are designed for eyeglass wearers.- Objectives:Long working distance (LWD) infinity corrected (IOS) plan achromatic: 4x/0,10 (working distance 18 mm), phase contrast 10x/0,25 (working distance 10 mm), phase contrast 20x/0,40 (working distance 5,1 mm), 40x/0,60 (working distance 2,6 mm), corrected for 1,2 mm cover glass.

LightCycler Nano Instrument – Real-time PCR amplification and detection instrument for tube-based as (more)says of up to 32 (4 x 8) samples per run, with minimal noise, footprint and weight. Assembled from just a few building blocks, the robust LightCycler Nano System is easy to transport and install. Up to 32 samples can be run in 0.2 ml tubes connected as strips. Fast heating and cooling is done using Peltier elements. Assay performance is supported further by a heated lid. Excitation is provided by high intensity LEDs filtered to provide light at 500 nm that is capable of exciting all fluorophores commonly used in qPCR. A prism is used to generate spectra from fluorescent emissions. These spectra are imaged using a CMOS camera. The LightCycler Nano Instrument is a 32-sample real-time PCR device for gene expression and genetic variation analyses in mono and dual color mode. Due to its small size, low weight and easy handling of reaction devices and software, this exceptionally silent instrument is ideal for scientists using real-time PCR for everyday use. The LightCycler Nano Instrument is designed for life science research only and not intended for use in diagnostic procedures.

Livestock scale H315/4I series is used to fast and precise determination of mass of cattle and swine (more) with possibility of multiple tarring in all measuring range. The weighing process is carried out with closed entering gate. Barrier height is dependent on the weighing platform dimensions. The scale features an indicator PUE H315 series in stainless steel housing. The indicator comprises a LCD backlit display and function buttons. The platform and the indicator are connected with a long cable for easy mounting of the indicator on a wall. Special software with various dampening filters enables stable and precise mass readout even if the animals are moving on the platform. An optional solution is a scale for measuring all herd of cattle.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Ohaus PX4202 Pioneer Precision Balance, 4200 g, 0.01 g Maximum Capacity 4,200 g Readability 0.01 g R (more)epeatability (Typical) 0.01 g Features - Maximum capacity of 4,200 g with a readability of 0.01 g - Stainless steel weighing pan with an 180mm diameter for durability - InCal™ semi-automatic internal calibration for maintaining accuracy - Backlit 2-line LCD display with additional information or guidance on the second line - 1-second stabilization time for quick and reliable measurements - Durable construction with a cast metal lower housing and plastic top housing - USB and RS-232 connectivity for easy data communication - Static removal bar for convenient grounding and reducing static interference - Integrated weigh-below-hook for specialized weighing applications The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, intuitively designed for intelligent operation with a second line display for additional information, and USB and RS-232 connectivity for easy communication. Click Here to View Product Video INCLUDED: The Ohaus PX4202 Pioneer Precision Balance, 4200 g, 0.01 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty