Heidolph BR 12 Pivoting-Blade Impeller

CS 60 BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extracto (more)r cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Interfurn Drawer Door Cabinet, RT Creme 600x600x490

Hersteller: Thermo Scientific Modell: Megafuge 16R + TX-400 15/50ml - Jahr 2018   Beschreibung:   Di (more)e Thermo Scientific Heraeus Megafuge 16R Kühlzentrifuge ist eine Kühlzentrifuge, bei deren Entwicklung der Benutzer im Mittelpunkt stand. Das benutzerfreundliche Bedienfeld macht es einfach die Voreinstellung von Drehzahl, RCF-Wert, Laufzeit, Temperatur und Laufprofil. Die eingestellte Drehzahl wird innerhalb von Sekunden erreicht. Die Megafuge 16R erreicht maximale Drehzahlen von 15.200 U/min und eine maximale RCF von 25.830 x g. Der wartungsfreie Induktionsmotor sorgt auch bei hohen Drehzahlen für einen leisen und vibrationsarmen Betrieb und garantiert eine sehr lange Lebensdauer. Kernmerkmale: - Einfach zu bedienendes Bedienfeld zur Einstellung von Geschwindigkeit, RCF-Wert, Zeit, Temperatur und Laufprofil. - Ausgestattet mit einem Induktionsmotor, der einen leisen, vibrationsarmen Betrieb und eine lange Lebensdauer gewährleistet. - Gehäuse und Rotorkammer aus Stahlblech, mit einem Innenraum aus Panzerstahl und einer hochschlagfesten Kunststoff-Frontplatte. - Der Deckel ist mit einer Sichtöffnung und einem Schloss versehen und kann nur geöffnet werden, wenn der Rotor vollständig stillsteht, um die Sicherheit zu gewährleisten. - Integrierte Rotorerkennungssysteme verhindern unzulässige Drehzahl Einstellungen. - Automatische Erkennung und Reaktion auf Unwuchten zur Erhöhung der Betriebssicherheit. - Ausgestattet mit Kühlung, um die Integrität der Probe während Hochgeschwindigkeitsbetrieb. - Erreicht innerhalb von Sekunden die eingestellte Geschwindigkeit und verbessert so die Effizienz der Arbeitsabläufe im Labor. Technische Daten: Max. RZB: 25,830 × g Drehzahl: 300 – 15,200 rpm Max. Kapazität: 4 × 750 mL/4 × 4 MTP Geräuschpegel: <63 dB(A) Netzanschluss: 230 V, 50 – 60 Hz Max. Stromverbrauch: 1400 W Abmessungen (B × T × H): 360 × 623 × 605 mm Temperaturbereich: -10 °C bis 40 °C Lieferumfang: - Megafuge 16R + TX-400 15/50ml - Jahr 2020 - Bedienungsanleitung als PDF via E-Mail Auf Wunsch können wir Ihnen beliebige Adapter für die Zentrifuge mit anbieten. Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.

This listing is for a Sysmex XT-1800i Automated Hematology AnalyzerThis system is complete, with PC  (more)and software disks.Designed to be reliable and efficient, the Sysmex XT-1800i offers medium volume laboratories an automated hematology system that can truly meet and exceed their expectations. The XT-1800i provides CBC and differential analysis using the same technologies as the other analyzers in the Sysmex XT-Series and XE-Series lines. Body fluid samples, including CSF, serous fluid and spinal fluid, are analyzed for RBC and WBC counts. A 6-part WBC Differential, including enumerated immature granulocytes (IG% and #), is optional for laboratories who need to reduce smear reviews. The XT-1800i streamlines your workflow by providing testing for up to 80 samples per hour, enabling rapid turnaround time.

The ES is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating  (more)protection. Easy to install, resistant and with a small footprint, ES is your best choice for low viscosity samples. Velp ES ensures a smooth start and vigorous agitation even at maximum speed. ES can reach speeds of 1300 rpm and stir up to  15 litres. The device can manage viscosity, with a maximum of  1000 mPas. The easy chuck is easy to close and can accommodate shafts with up to 10 mm diameter and does not require any tool. Stirring speed: 50 – 1300 rpm Maximum stirring volume (H2O): 15 liters Maximum viscosity: 1000 mPas Maximum torque: 15 Ncm Construction material: technopolymer Chuck hole range: 1 – 10 mm Dimensions (WxHxD): 80 x 160 x 200 mm Weight: 1.3 kg

The Zetasizer Lab system offers traditional 90-degree side-scatter size measurements but still offer (more)s enhanced features. The Zetasizer Lab incorporates Adaptive Correlation, M3-PALS and constant current zeta mode as well as our extended size range analysis when used with ZSU1002 capillary cell. The Zetasizer Lab is the perfect entry-level system, offering a wide range of features, including: DLS analysis : particle size measurements from 0.3 nm to 10 μm Extended size range analysis offers improved accuracy for particle sizes above 1 μm, and indicative results above 10 μm (using ZSU1002 Low Volume Disposable Sizing Cell) Zeta potential of nanoparticles and colloids using M3-PALS analysis and constant current zeta mode Molecular weight using Static Light Scattering at 90° Supports use of Low Volume Disposable Capillary Cell for size measurements in sample volumes as low as 3 μL Red Label variant for more challenging sample types, such as proteins, surfactant solutions and low solid content samples Size Measurement Principle: Classical 90° Dynamic Light Scattering Zeta Measurement Principle: ELS with M3-PALS and Constant Current Zeta Mode Molecular Weight and B22: Static Light Scattering (90°) Low Volume Disposable Sizing Cell with Extended Size Analysis Support: Yes Size Range: 0.3 nm to 10 μm Minimum Volume: 3 μL Zeta potential Size Range: 3.8 nm to 100 μm Minimum Volume: 20 μL Including software

miVac is a range of centrifugal concentrators capable of removing water and organic solvents from a  (more)variety of sample formats including tubes, microplates and vials. miVac systems are suitable for use with a wide range of solvents, from volatile organic types through to water and many medium boiling point solvents. The system is very simple to use, allowing samples to be safely concentrated or taken to complete dryness. The large clear display enables easy monitoring of time and temperature. The intuitive controls allow inexperienced users to get first-class results, while allowing more sophisticated programming for experienced workers. The simple, robust design ensures years of reliable service even when used intensively, such as in teaching or multi-user laboratories. To improve performance there are built-in special modes for working with water and alcohols. Performance is further enhanced through the use of the miVac SpeedTrap refrigerated condenser. Simplified operation with optimized programs for water, alcohol and other solvents Precise temperature control with timer and digital display up to a max of 60°C Various heating functions (preheating and heating of the interior) Plastic coated aluminum chamber and acrylic glass cover for better chemical resistance The rotors are easily interchangeable Compact systems are quiet when in use and up to 40% faster than comparable machines

Medline 50ml Controlled Heating Mantle MS-E Equipement neuf dans son emballage d'origine Référence : (more) MS-E1005 (MS-E) Volume (ml) 50 Construction du boîtier en acier, avec revêtement résistant aux produits chimiques Poudre de silice moulée pour isolation thermique Élément chauffant Fil Nichrome Manteau Tapis en fibre de verre tissé Température de l'élément jusqu'à 450 °C Alimentation 220 V CA Watts 60