Dry bench in enamelled stoneware 1500 x 600 x 900 mm

COMBISTORAGE 60 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely mad (more)e of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 1 painted steel shelf + 1 retention tank with grid - ACID/BASE COMPARTMENT: 3 plastic-coated steel shelves (max load 60 Kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

Biomerieux 29551 PREVI Color GRAM Gram Coloration Staining Console with side reagent Tray In very g (more)ood condition

The VELP RESPIROMETRIC BOD sensor is designed to provide a SMART solution to water and wastewater qu (more)ality control laboratories. This tool from Velp was designed to simplify the analysis process and make measurements as quick and easy as possible. - The bright 4-digit LED display provides long battery life compared to other sensors on the market. - Intuitive 2-button interface for easy analysis setup. - Pressure range: 500 ÷ 2000 mbar (hPa). - Results available in BOD (mg/l) and pressure (mbar). - BOD scales: 90, 250, 600, 1000, 4000, higher values ​​after dilution. - Automatic conversion of pressure results to BOD. Technical details: - Electronic pressure sensor. - Bottle volume: 500 ml. - Databox power supply: via USB connected to the PC. - Sampling interval: 30 minutes to 48 hours, depending on the duration of the test. - Data archive: on the sensor, RESPIROSoft™ database and Ermes Cloud. - Measurement period: From 1 to 730 days. Wireless control with DataBox™ and RESPIROSOFT™ software The proposed kit includes the wireless transmitter, for maximum comfort. The RESPIROMETRIC sensors transmit data directly to the PC allowing real-time monitoring of the analysis curve. Data management software is also included in the kit. The DataBox™ transmitter will be able to manage up to 400 RESPIROMETRIC sensors (66 systems). In short, the advantages: - Real-time analysis curve - More important information displayed at a glance - Sensor battery monitoring - Pre-installed methods - Test reports - Comparison of results - Simple and easy management Connect and monitor your sensors to the Ermes cloud wherever you are Improve the laboratory experience and prepare for the future, the connection to the VELP Ermes Cloud will improve the productivity and comfort of laboratory operators. - Real-time display of analyzes with simple and complete graphs, even from different PC, tablet and smartphone locations. - Real-time instrument status. - Advanced support for applications and services. - Access your analysis database anytime, anywhere, all you need is an internet connection. - Create and share analytics reports in multiple formats. - Instant event and alert notifications based on your settings (platform and email).

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg