Diaphragm vacuum pump Laboport N 842.3 FT.18 KNF

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D4B was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is not included. It is in good cosmetic condition with some marks from use. It comes with 1 x Varian Oil Mist Eliminator

This Edwards ECB8 Rotary Vane Vacuum Pump was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and has been fully tested by a service engineer. It is in full working order and did not require a service. It is in good cosmetic condition with minor marks.

KNF IP65 UFEM 1.10 KT.18RCP2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to su (more)it most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduces flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 KT.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 TT.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT400D - CF160 160W Turbomolecular Pump Ultimate Vacuum <1x10-10 mbar Inlet Connection  (more)DN160CF Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - CF160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

This JDS SB Series Fiber Optic Switch  Part No. SB16B5-C0FA was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and is in good cosmetic condition with marks from use. Included with ti are; 17x Fiber Optic Cables: 1x - 05/97 TB II4x - 06/97 TB II5x - 09/97 TB II1x - 10/97 TB II6x - 12/97 TB II Length - 319cm  The units are in good cosmetic condition.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V Chamber Volume 25L Sterilization Temperat (more)ure Range 105°C to 126°C Chamber Dimensions 9.4 x 21.6 in. (24 x 55 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models. INCLUDED: The Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW