METTLER TOLEDO OptoCap BT02T

Labconco 9000520 WaterPro PS Polishing Station, 115V, 60HzFeatures - Timed dispense for unattended  (more)operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000520 WaterPro PS Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Hei-VAP Expert HL/G3 Non Coated Hand Lift w/ G3 Vertical GlasswareFeatures - Rotation speed (more) range of 10 to 280 RPM - Heating bath temperature range of 20°C to 210°C - Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm - Multilingual menu and text display for error messages - Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller - Smart functions include timer and maximum temperature limitation - Optional display of vapor temperature - Highly resistant PTFE vacuum seals achieve maximum tightness and reduce expensive spare parts - Available in hand lift or motor lift models - USB and Micro SD interfaces featured 5" touch screen display with clear display of all values, featuring basic and advanced views, along with additional smart functions Separate knobs for rotation and heating with locking function to prevent accidental adjustments, along with LED ring lights Safety heating bath with overheat and dry run protection, featuring ergonomic handles for easy removal/disposal of contents The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Eppendorf 9 x 7ml Adapters, Cat. # 022637541 New in box Eppendorf 9 x 7ml Adapters, Cat. # 022637541 (more) for the A-4-44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 9 x 7ml Adapters, Cat. # 022637541 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 9 x 7ml Adapters, Cat. # 022637541 includes: - Full 6 Month Parts and Labor Warranty

ProMinent Dosing Pump gamma/L Type, Gala 1000NPB200UB000000 This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition and powers up without issue.

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab wh (more)ere it was surplus to requirements. The system is in full working order and was used until very recently. Included in the system are; The system units are in good cosmetic condition. The system consists of the following units: Biomek FX robotic liquid handlerSerial No. 501258024 plate position bedFitted with light curtain, two robotic heads, tip changer, Variomag Teleshake Biomek FX Device ControllerSerial No. 4000A51063 Thermo Electron Microplate HotelSerial No. 40578218With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers Cole Parmer Masterflex Console Drive with twin head bi-directionalModel 7520-c7 Cole Parmer Masterflex L/S Economy Drive with twin head ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1Serial No. 1S1OAGS11D00MJ0345JQ View Sonic 17" MonitorModel VS14768Serial No. TT1152621348 Lenovo keyboardModel KU-0225Serial No. SN8134833 Lenovo mouseSerial No. 44HM285 ALP 74cm conveyer with Microscan MS-710 barcode scannerSerial No. FIS-0710-0010 Variomag Teleshake plate shaker with power supply Beckman Coulter Accuframe positioner Passed a PAT test on 11.06.24 Included:2 x Biomek FX start-up training manuals2 x hoses for Masterflex pumps8 x data cables8 x Plexiglass screen panels10 x 719301-AA Fixed Tip Kit8 x Ferrite cable noise screening block5 x work bed fittings4 x airline connectors2 x 10 litre plastic Nalgene solvent bottles

This item has just arrived in our stock. Please enquire for further details.

MARSHALL Select MS-OT20LC Overhead Stirrer, 20L Maximum Stirring Quantity 20L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 100,000 mPas Features - High torque output of 40 Ncm ensures effective mixing performance - Features brushless DC motor for longevity and maintenance-free operation - Slow start-up function to prevent spills and splashes during use - LCD display for real-time monitoring of speed and torque - Through-shaft design allows for easy adjustment of the impeller position - RS232 interface for PC control and data transmission - Safety circuits include automatic stop in anti-stall or overload conditions - Visual alarms for overload protection enhance safety during operation - Torque trend display provides real-time information on viscosity changes - Capable of accepting pass-through stirrer rods for versatile setup options - IP21 protection class ensures basic protection against solid objects and dripping water The MARSHALL Select MS-OT20LC Overhead Stirrer is designed to handle stirring capacities up to 20L, making it ideal for extensive laboratory applications. It operates within a speed range of 50 to 2,200 RPM with a high control accuracy of ± 3 RPM, supported by a robust brushless DC motor. The stirrer offers a maximum viscosity handling of 100,000 mPas and a torque output of 40 Ncm, ensuring effective mixing even with thick samples. Equipped with an advanced microprocessor, the MS-OT20LC provides precise speed control and includes features like a slow start-up to prevent spills and a safety circuit for overload conditions, which automatically stops the motor. The MS-OT20LC’s through-shaft design facilitates easy adjustment of the impeller position, enhancing the flexibility and efficiency of mixing operations. The LCD display allows for real-time monitoring of both set and actual speed and torque, ensuring constant performance even as sample viscosities change. Additional features include an RS232 interface for PC control and data transmission, and visual alarms for overload protection. The IP21 protection class signifies basic protection against solid objects and dripping water, making this stirrer a dependable choice for busy laboratory environments. INCLUDED: The MARSHALL Select MS-OT20LC Overhead Stirrer, 20L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty